Babyhug BGBC007 User manual

Front Carrying Position:
In Facing-In And Facing-Out Position:
To take the baby out while carrying in these positions, simply unbuckle
the head support from your shoulder strap and slide baby out.
Back Carrying Position:
To take baby out in this position rst, get a second person to hold your
baby at the back. Then release the chest buckle and slide both
shoulder straps. (Warning: Make sure the second person is holding the
baby and the carrier this time). Finally, put the baby and the carrier on
a soft surface and unfasten all the buckles to take the baby out.
STYLE CODE : BGBC007
baby carrier
Carrying Capacity
Up to 9 Kg
Age group
0 Months +
Embrace 3 in 1 Baby Carrier
Please read the instructions carefully before use and keep this manual for future reference.
Made in China
Imported & Marketed By
Brainbees Solutions Pvt. Ltd.
Corporate & Registered Office Address:
Rajashree Business Park, Plot No: 114,
Survey No. 338, Tadiwala Road,
Near Sohrab Hall, Pune 411 001
Customer Care :
020-30556310
customercar[email protected] 3 in 1 Baby Carrier Breathable Fabric Padded Shoulder Straps Easy To Use
Taking The Baby Out

12
Helpful Tips:
• To minimize stress on the shoulders and back, spread out the straps on your
shoulders to evenly distribute the weight of the baby
• To nurse in privacy, sit down comfortable, loosen the straps and have your hands
supporting the baby and the baby carrier at all times. Make sure to tighten the
straps again before standing up
• When learning to place your baby in the baby carrier, do so over a bed or soft
surface or with the help of another person
• If you feel that the baby carrier is too tight for your baby, then follow the below
steps :
1. Check if the size adjustment buckle is in the correct position for your baby's size
2. Adjust the straps buckles so as to increase the length of the straps. This will give
more space to you and your baby.
Cleaning Instructions:
To keep the baby carrier looking new for a longer time, we recommend that regular
care be limited to spot cleaning with a damp cloth. Machine wash only if necessary.
Machine wash separately in cold water, gentle cycle. Drip dry only. Do not bleach or
use fabric softener. Do not use a dryer. Do not iron.
Babyhug liquid laundry detergent is best recommended.
Safety Warnings:
• Use this carrier for children up to 9 kg only
• Small children can fall through the leg opening. To avoid fall or strangulation
always adjust the leg openings to the smallest size suitable for infants
• Do not use this carrier as a child restraint in a motor vehicle or as a car safety seat
• The carrier is not suitable for use while cooking, skiing, running or riding a bike
• While using this carrier do not participate in any strenuous sports activity
• If you have to stoop while using the carrier with the baby in it, bend at the knees
and not at the waist
• The product is subject to normal wear and tear. Check the carrier often and
discontinue using the carrier if the seams are loose, torn or if the carrier is
damaged
• Do not place sharp objects in the carrier pocket
• Do not leave the child in the carrier if it is unattached to a caregiver
• The carrier is not to be used by a person impaired by alcohol or drugs
• Avoid using this carrier if the user experiences back pain or any other physical
problems
Tips for Child Safety
• This baby carrier is designed for use by adults while walking only. Verify that all
buckles, toggles, straps and adjustments are secure before each use
• Always make sure your baby's nose and mouth are clear and unobstructed by the
carrier or clothing so as to ensure easy breathing
• The baby must face towards you until he or she is able to hold his or her head
upright independently
• Hold on to your baby tightly until all buckles and latches are secured in place and
straps are pulled tight around the user's body. Sit down when placing and
removing the baby
• Make sure baby's body parts and skin are clear when locking buckles or snaps to
prevent from pinching
• Check often to ensure that the baby is not too hot, straps are snug but not too
tight and the baby is secure

4
3
Step 2:
Sit down and release one side of the head support. Unbuckle the
side opening and detach Velcro fasteners. Carefully slide the baby
into the carrier and hold him/her against you. Make sure that the
baby's legs are secured in the leg opening and the baby's arms
are in the arm holes. (For bigger babies, the arms can comfortably
rest over the sides of the head support.)
Step 3:
Fasten the buckles over the Velcro side opening and pull on the
end of the webbing strap to adjust t. Leg opening must be
adjusted to the smallest size possible to prevent small babies
from slipping through.
Step 4:
While supporting the baby's weight with one hand, fasten the
side support buckles. Before releasing your hold on the baby and
standing up, ensure that all the buckles are securely fastened.
The Facing In Position
The facing-in position is a perfect way to keep your baby cuddled
against you and provide close contact and attention babies need.
The wrap-around head support cradles baby's head and neck. The
facing in position helps in parent baby bonding as you can play,
talk and make eye-contact with the baby in this position.
Step 1:
Pass the shoulder straps over your head, crossing behind your
back and fasten the buckles at both sides of the carrier. At the
same time, fasten the waist belt
Putting Your Baby In:
Arm Hole
Contoured shoulder strap
Head support
Cross part
Side opening buckle
Head strap buckle
Leg opening
Front pocket
3D mesh
Shoulder strap buckle
3D mesh lining

Carrying the Baby On The Back (6 Months+)
Step 2:
Have a second person hold the baby at your back. Pass the
shoulder straps over your shoulders, crossing at the front and
fasten the buckles on both sides. At the same time fasten the
waist belt too.
Step 3:
Adjust the straps till both you and the baby feel comfortable.
Step 1:
Place the carrier on a at surface. Place the baby into the carrier
and attach the fastenings and buckles
• If the baby falls asleep in the carrier, turn the baby' head
sideways to provide an unobstructed source of air
• There should always be room between the baby's face and your
chest to ensure a clear source of air
Warning:
56
The Facing Out Position
The facing out position is perfect when your baby can support
his/her own head and is ready to explore. This position gives your
baby the best of both the worlds - the comfort and security of
being held by you and checking out the things in the world
around.
Step 2:
Sit down and release one side of the head support. Unbuckle the
side opening and detach Velcro fasteners. Carefully slide the
baby into the carrier and hold him/her facing away from you.
Step 4:
Fasten buckles over the Velcro side opening and the head
support buckles. Adjust the head support straps until the baby's
back is snugly against your chest. The baby should not lean
forward. (Make sure that the baby's arms are in the arm holes. For
bigger babies, the arms can comfortably rest over the sides of
the head support.)
Step 3:
Make sure each of the baby's legs are in the leg opening. Fasten
the Velcro fasteners.
Step 5:
While supporting the baby's weight with one hand, pull on the
end of the webbing strap to adjust t. Leg opening should be
adjusted to the smallest possible size. Before releasing your hold
on the baby and standing up, ensure that all the buckles are
securely fastened.
Note:
For both the facing in and out positions, adjust the carrier till the baby is high on
your chest or at a height where you can easily kiss the baby's head.
Step 1:
Pass the shoulder straps over your head, crossing behind your
back and fasten the buckles at both sides of the carrier. At the
same time, fasten the waist belt