Babyhug BGBR045 User manual

Off Roader Manual Ride-on
Style Code: BGBR045
Please read the instructions carefully before using the Ride-on. And keep it safe for future reference.
ride-ons
12 to 36 27
Sturdy frame
Musical ride-on Under-seat storage

Assembling Instruction
Wheels and Fork
Insert the axis through the wheels and black plastic rings in to
the fork, tighten by a cotter pin.
Fix the wheels caps on all wheels.
Anti-tumble shelf
Place the anti-tumble shelf in the cavity provided at the rear of
the ride-on.
Fix with screws and tighten securely
Steering Wheel
Place the steering wheel over the fork post
Insert the bolts into the holes provided and tightened with a
screwdriver
Headlights
Connect the wire in the light to wire in the body.
Insert the headlights into the cavity provided in the body
Stepney
Place the stepney in the back of the ride-on in the space
provided
Tighten the screws with the screwdriver
Backrest
Place the backrest on the cavity provided at the rear of the
ride-on
While holding the ride-on firmly push the backrest firmly in to
the hole. Make sure the backrest is completely seated.

Battery Handling
1. Battery must be handled by adults only, and use AA size batteries.
2. Do not mix old and new batteries.
3. Always remove batteries when the unit is not going to be used for an extended
period of time.
4. When replacing new batteries, always replace all batteries.
5. Different types of batteries are not to be mixed.
6. Do not dispose of batteries in fire, batteries may explode or leak.
7. Non-rechargeable batteries are not to be recharged.
8. Rechargeable batteries are to be removed from the toy before being charged.
9. Rechargeable batteries are only to be charged under adult supervision.
10. Batteries are to be inserted with the correct polarity. The supply terminals are not
to be short-circuited.
Assembling Instruction
Battery Fixing
Loosen the screw of the battery cover, please keep all the
screws in a safe place away from children's reach.
Insert 2 AA batteries in the battery house as per the polarities
mentioned.
Then tight all the screws with a screwdriver.

1. Product is designed to seat only 1 child at a time.
2. Parental guidance and supervision are strongly advised to ensure safety.
3. Adult assembly and installation of all parts are required.
4. Batteries to be handled by adults only.
5. Avoid using the ride-on in streets, traffic and cross roads.
6. Do not use the ride-on near swimming pools, stairs, slopes and uneven surface.
And keep away from heat source and electrical fittings.
7. Check whether all screws and fittings are securely fixed before every use. Stop
using the ride-on if any parts are missing or damaged.
8. Advisable to wear shoes while using the ride-on.
Warning:
Imported & Marketed By:
Brainbees Solutions Pvt Ltd
Rajashree Business Park, Plot No: 114,
Survey No. 338, Tadiwala Road,
Near Sohrab Hall, Pune 411 001
Customer Care :
020 - 46608179
customercar[email protected]
Customer Care Address:
Same as Importer's address
Made in China