Babymore Peanut User manual

P44/V1/19 Babymore
USER MANUAL
Noce
1.
Only for use with Babymore Peanut Isofix Base.
2.This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to ECE
Regulaon No.44,04 series of amendments for Semi-universal use in
vehicles fied with ISOFIX anchorages systems.
3.
It fit vehicles with positions approved as ISOFIX positions(as
detailed in the vehicle band book), depending on the category of the
child seat and of the fixture.
4. The mass group and the ISOFIX size class for which this device is
intended is:0-13KG and D.
This child restraint is classified for (Semi-universal) use and is suitable
for fixing into the seat posions of the following cars:
Seat posions in other cars may also be suitable to accept this child
restraint. If in doubt, consult either the child restraint manufacturer
or the retailer.
CAR FRONT REAR
CARLIST Outer Outer Centre
No Yes No
Peanut Isofix Base
Peanut Group 0+ Rear Facing Car Seat
Approved under ECER44/04
GROUP 0+ Suitable for newborn to 13kg
Thank you for purchasing Babymore, If you need assistance.
Call: [phone] or email: [email protected]
Babymore, Unit C2 Zenith Industry Estate, Paycocke Road, Basildon,
Essex, UK, SS14 3DW

Contents
32
1.Applicability.............................................................................3
2.Safety instrucons...................................................................4
3.Parts and interior equipment..................................................5
4.ISOFIX installaon instrucons...............................................6
5.Adjust the carrying handle.......................................................8
6.Correct securing your baby.....................................................8
6.1.Seng the shoulder belt height............................................8
6.2.Adjust the shoulder straps.....................................................9
6.3.Securing the baby with the harness.....................................9
6.4.The use of buckle.................................................................10
7.Care and Maintenance..........................................................11
7.1.Remove the fabric cover.....................................................11
7.2.Cleaning of the fabric cover................................................11
7.3.Care and Maintenance........................................................11
8.What to do aer an accident.................................................11
WARNING
The following brief instructions are intended to provide only an
overview. In order to achieve maximum security and comfort for your
child it is absolutely imperave that you read the whole instrucon
manual carefully.
1. Applicability
The baby car seat is suitable for age Group 0+(up to 13kg)
Group 0+:Newborn-13kg
DO NOT put the baby car seat on seats on which a front
airbag is acvated.
● Only suitable for vehicle seats with a three point automac belt,
approved under ECE regulaon no R.16 or equivalent standard.
AIR BAG

54
3.Parts and interior equipment.
Handle
Canopy
Shoulder belt / slot
Chest pad
Buckle
Comfort pad
Release Buon
Harness Belt Strap
Shell
Buon of handle
2. Safety instrucons
In order to achieve maximum security and comfort for your child,
please read the whole instrucon manual carefully, to avoid any misuse
or carelessness use.
● Always keep this Instrucon Manual with car seat;
● Do not put this baby car seat on any seat with activated airbags;
● The baby car seat must be installed rearwards facing(the child’s feet
point towards to the backrest of the vehicle seat;
● This baby car seat can only be installed using a three-point vehicle
belt;
● Before every journey, always check the baby car seat is installed
correctly ;
● Do not or aempt to change any original components and accessory
parts;
● Always strap your baby into the car seat and never loose sign of
your baby;
● Do not leave your baby unaended in the vehicle;
● Never use the baby car seat as a hopping bag or as a means for
transporng something;
● Protect the child restraint system against direct sun light to prevent
high temperature from damage;
● The child car seat must not be used without the cover;
● Ensure that all the parts are locked in place correctly;
● Luggage or other objects liable to cause injuries in the event of
collision shall be properly secured;
● The modificaons or addions are not allowed to be made to this
car seat without approval of professionals. Repairs are only allowed
to be undertaken by persons who have been authorized to do so;
● Periodically inspect the restrict system, pay parcular aenon to
the points of aachment, stching and adjusng devices;
● Do not connue to use the child car seat if parts have become
damaged or been loosened;
● The handle of the baby car seat must to be against the back of the
vehicle seat;
● The infant car seat must always be secured with the vehicle seat
even when not being used;
● Care has to be taken to only use an original hoodthis car seat cover
because the cover is also an essenal funconal component. Spare
covers can be obtained from your specialist retailer;
● The plasc parts of the infant car seat heat up in the sun. Your baby
can suffer burns from this. Protect your baby and the infant car seat
from intense sun exposure(e.g by placing a light cloth cover the seat)

76
Basket installaon posion indicator
Seat separaon handle
Unlock buon for
ISOFIX adjustment
Support leg extend
buon
Indicator of support
leg
ISOFIX resets indicator
ISOFIX unlock buon
ISOFIX adaptor
“OPEN”
Fig.1 Fig.2
Fig.3 Fig.4
4. ISOFIX Base Installaon instrucons
Step 1.Please fully open ISOFIX support legs outward. (Fig.1)
Step 2.Position the base on ISOFIX vehicle seat.(Fig.2)
Step 3.Hold the buon first,then popping ISOFIX adaptor.Aim the
ISOFIX connector to ISOFIX fixed groove of car.Then push connector
to the fixed groove ll “kaka” sound heard.(Fig.3)
Step 4.When ISOFIX connector installed correctly, the indicator of
ISOFIX port shows green,when the indicator turn red, please loosen
connector and install again.(Fig.4)
Diagonal belt guide
Shoulder belt slot
Connecng rod

98
-Too high
-Too low
6.Correct securing your baby
6.1.Seng the shoulder belt height
Check whether the shoulder belts be at the right height for your
child. The should belts should be at shoulder height or just above.
6.2.Adjust the shoulder straps
If the height of shoulder belts in child car seat is not fit for child,
Adjust the height of the shoulder belts, please proceed as follows:
Step 1: loosen the shoulder harness
(see point 6.2).
Step 2:Pull out the buckle tongues from the
chest pad and the slots on the cover and the
shell, then thread them into the
corresponding belt slots.
● Ensure that both of the shoulder belts go through slots at the
same height, and not twisted.
● The shoulder straps are released by pressing
the lever(under the seat cover)on the front of
the seat.
● Press down on the label marked “Press” as
your trip the two should straps with
your other hand, pull to adjust it.
6.3.Securing the baby with the harness
1.Firstly, adjust the shoulder belt height (see point 6.1)
2.Adjust the shoulder straps(see point 6.2),open the buckle, and place
them down sideway. Seat your child in the child car seat. Place both
shoulder straps over your child’s shoulders.
3.Lock the buckle ghtly.
4.Ensure that the straps are close to the should of the child by pulling
the straps ghtly.
Fig.1 Fig.2 Fig.3 Fig.4
press
5.Adjust the handle
● The handle for the baby car seat can be
adjusted into 4 posions.
● To adjust the handle, please press the
button of handle on both side at the
same time,now it can be rotated.
● Adjust the handle of the baby car seat
when locking to suitable posion and
check if it is securely locked.

1110
Fig.2Fig.1 Fig.3
● The harness should be adjusted as ghtly as
possible without causing discomfort to your
child.
● It is dangerous not to ghten the straps. Check
the adjuster and ensure the straps are pulled
tightly, not twisted after each use.
6.4.The use of buckle
1.Put the two metal secons of the buckle connectors together (fig.1).
2.Slot the two buckle connectors into the slot in the top of the buckle
unl they “click” into place (fig.2).
3.Check the harness is correctly locked by pulling the shoulder straps
upwards (fig.3).
4.To release the harness, press the red buon on the buckle
downwards. 30
P
7.Care and Maintenance
7.1.Remove the fabric cover
Step 1:First pull out the harness from the seat.
Step 2:Undo the press buon on the handle, then remove the canopy
from backwards.
Step 3:Loosen the elasc, remove the fabric cover from upwards.
● Follw the steps described above but in reverse order in order to
re-fasten the cover.
7.2 Cleaning of the fabric cover
Use only neutral detergent and warm water to wash the fabric
cover.Do not wash it by machine,spin-dry or tumble-dry are not
recommended.
THIS COVER SHOULD BE HAND WASH
7.3.Care and Maintenance
1.Please regularly check the funcon and spare parts of the baby car
seat are in good condion to provide the maxinum protecon.
2.Before using, please check the locking fastness of the buckle by
pulling in effort the straps and see whether the buckle is loose or not.
3.Do not use the baby car seat in cold,wet or hot circumstance for a
long me.
8.What to do aer an accident
Please change the seat without fail aer an accident.