Backyard Discovery WILLOW 2404014 User manual

Made in China
INS-2404014-A- WILLOW GREENHOUSE-ENG 12-11-2023
Manufactured by:
Backyard Discovery
3305 Airport Drive, Pittsburg, KS
66762 800-856-4445
Please visit www.backyarddiscovery.com
For the most up to date assembly manual, to register your product, or to order
replacement parts Para obtener instrucciones en español, visite
www.backyarddiscovery.com
EASY STEP-BY-STEP
3D INTERACTIVE INSTRUCTIONS
DOWNLOAD THE FREE APP
Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: [phone]
J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: [phone]
WILLOW GREENHOUSE
MODEL # : 2404014
For Horticulture Use Only

•Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step.
Using incorrect hardware may result in improper assembly
•Remember to double check for underground utilities and overhead electrical lines
•The hardware to attach the post mounts to the structure is included.
•The hardware to mount the structure permanently to a concrete surface is included.
OWNER'S MANUAL - BASIC SETUP DIMENSIONS & ASSEMBLY NOTES
It is critically important that you start with square and level footings or concrete pad to
attach your structure
9'-6 1/4"
2902mm
6'-2 3/4"
1899mm
2850mm
9'-4 1/4"
2058mm
6'-9"
7'-10"
2386mm
908mm
2'-11 3/4"
2388mm
7'-10"
2060mm
6'-9"
6'- 3/4"
1847mm
2

8 15/16"
227mm
11 1/8"
282mm
11 1/8"
282mm
10 1/4"
260mm
6"
152mm
6"
152mm
6"
152mm
6"
152mm
m
1
3
2
8
'-
1
6
9
3
m
/8"
7'- 11/16"
2152mm
3155mm
10'-4 3/16"
11 7/16"
3'-4"
1016mm
OWNER'S MANUAL - ANCHORING LAYOUT
3

OWNER'S MANUAL - SITE LOCATION AND PREPARATION
A. Check your local building and city codes for permit requirements or restrictions,
including any HOA restrictions.
B. Select a location with lots of sun, good drainage, and the ability to create a level
firm surface for your greenhouse.
•A firm, level surface is critically important to the longevity of your greenhouse.
•Ensure it is accessible on all sides to clean and conduct annual maintenance
•Consider a site location with a close proximity to both water and electrical
sources
•Make sure site drains well and avoid low lying areas.
•Recommended area for site preparation of the Willow Greenhouse is 10'-4 3/16"
x 7'-11/16" x 7'-10" (3155mm x 2152mm x 2386mm).
C. Before preparing your surface – double check for possibility of any underground
utilities (example: gas, cable, or sprinkler lines)
•Remove any grass, dirt, landscaping to create a level, hard-packed surface
•This may involve some digging to create a level spot, dependent on your site
location.
D. Determine your preferred site pad materials for your greenhouse
•It is NOT recommended to set the greenhouse directly on soil or grass. This will
shorten the lifespan of your greenhouse.
•Site pad options include gravel, patio or brick pavers, concrete pad.
•Anchors are included for either natural surface, such as gravel, or for a concrete
foundation.
•Manufacturer recommends installation on concrete surface or concrete post
pads.
4

5

6

7

8

9

10

11

12

|MAGNETIC DRIVER
|
H101100
(x1)
|SCREW SETTER
|
H100764
(x1)
|TORX WRENCH
|T-30
H100114
(x1) H100147|TORX BIT
(x1)|T-30
13

H100205
(x52)
|BOLT WH BLK
|5/16x2-1/4
H101165
(x5)
|CONCRETE ANCHOR 3/8"x3" BLK
|3/8x3
H100195
(x9)
|BOLT WH BLK
|5/16x2-3/4
H100415
(x44)
|BOLT WH BLK
|5/16x3-3/4
H100416
(x6)
|BOLT WH BLK
|5/16x3
H100630
(x8)
|WASHER FLAT BLK
|8x19
H100792
(x15)
|LAG SCREW WH BLK
|1/4x3
H100201
(x6)
|SCREW PFH BLK
|8x2-1/2
H100411
(x2)
|SCREW PFH BLK
|8x1-1/8
|SCREW PFH BLK
|8x5/8
H100653
(x8)
|NUT LOCK BLK
|1/4
H100380
(x44)
H100382
(x168)
|SCREW PFH BLK
|8x1-3/4
H100385
(x44)
|SCREW PFH BLK
|8x1
H100391
(x122)
|SCREW PFH BLK
|8x2
H100200
(x75)
|SCREW PFH BLK
|8x1-1/2
H100387
(x40)
|SCREW PFH BLK
|8x1-1/4
H100797
(x10)
|SCREW PWH BLK
|8x1
H101206
(x32)
| SCREW WOODGRIP
| 10-16x1-1/4"
H101203
(x32)
|SCREW PWH BLK
|8x1 1/4
H100483
(x8)
|SCREW PFH BLK
|8x2-1/4
H100202
(x5)
|SCREW PWH BLK
|8x5/8
H100821
(x14)
|SCREW PFH BLK
|8x2-3/4
H100392
(x8)
|SCREW PWH BLK
|8x3/4
H100627
(x4)
|SCREW PFH BLK
|6x3/4
H100488
(x8)
|BOLT WH BLK
|1/4x2
H100199
(x6)
|WASHER LOCK EXT BLK
|12x19
H100459
(x6)
|BOLT WH BLK
|5/16x1-1/4
H100457
(x1)
|BOLT WH BLK
|5/16x2
H100193
(x17)
|NUT BARREL WH BLK
|5/16x1-1/2
H100663
(x1)
|BOLT WH BLK
|5/16x3/4
H100469
(x1)
|NUT BARREL WH BLK
|5/16x5/8
|T-NUT BLK
|5/16
H100379
(x101)
H100198
(x113)
|WASHER LOCK EXT BLK
|8x19
H100405
(x15)
|WASHER LOCK EXT BLK
|6x15
14

BOLT WH
5/16 x 2-1/2
H100194
(x2)
PRE-ASSEMBLY STEP 1 - SORTING PARTS
It is critical for ease of assembly that you take the time to sort and organize the wood
and hardware.
WOOD PARTS:
•Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01).
•If there are multiple boards with the same stamped number, stack those pieces together.
•Stamps can be found on the flat surface of the boards or on the end of the boards.
•Allow yourself plenty of room - the wood pieces can take up a significant amount of space.
HARDWARE PARTS:
•We recommend that you have a separate table to organize the hardware.
•Hardware bags are printed with a seven-digit, alpha-numeric part number.
•You can organize your hardware by part number or group by hardware type (i.e. bolts, nuts, etc.).
•During assembly you only need to reference the last four digits of the number.
NOTE: CARTONS ARE NOT ORGANIZED BY BOARD NUMBER.
15

PRE-ASSEMBLY STEP 2 - TOOLS REQUIRED
Square
Level 24"
Phillips Screw Driver
Open End
Wrenches 1/2" &
9/16"
Drill
Attachments:
Phillips Head
Rubber Mallet
- Optional Tape Measure
Claw Hammer
1/8", 3/16", 3/8" &
7/16" Drill Bits
3/8" Drive Ratchet, 1/2" &
7/16" STD Sockets 1/2" & 7/16"
Deep Sockets
Cordless Drill
or Electric Drill
16

PRE-ASSEMBLY STEP 3 - CHOOSE YOUR ASSEMBLY METHOD
There are several types of assembly instructions available to you.
1. Printed Assembly Manual included with your set
2. BILT APP - 3D interactive instructions
3. Combination of the Printed Manual and BILT APP (Note: Step numbers can differ between the two
methods)
17

18

19

20