Important:
Please check the package content before attempting to
construction your greenhouse.
1. Place all corners and pipes for the structure on the
ground. NOTE:) Place cover inside while assembling
frame, so it is room temperature when stretching over
frame, this will prevent it from possible tears.
2. Connect the corners and pipes together to make
the whole frame as shown in the assembly instructions.
NOTE:) Use a rubber mallet or hammer to ensure that
the pipes are pushed in as far as possible, this ensures
the cover and the wire shelves fit properly.
3. Unfold the cover and stretch it over the frame.
NOTE:) The cover will be inside out, please invert it
prior to installing.
4. Pull the cover down to help hold the frame together
when you lift it.
5. Enjoy your green house.
Please Note:
1. When opening the door to the greenhouse, always
roll up the door and tie at the top. This will help prevent
damage to the door that could occur if the door it not
tied open.
2. Do not force zipper shut to prevent damage.
3. Store in a sheltered location during periods of
extreme weather and high winds.
4. Manufacturer not responsible for weather related
damages due to high winds and extreme weather
conditions.
Item UPC Code：6-81129 -11218-0
