B&B 3804 Instruction Manual

Operator’s & Safety Manual
14 - 26 inches
WWW.BBPIPETOOLS.COM
B&B Pipe & Industrial Tools
527 Michigan St,
South Houston, TX 77587
713-747-8502
PN 3804
OSM - 8K Super Stubby Mega Roller 3804 R1
8,000 lbs Super Stubby Mega Roller

8,000 lbs Super Stubby Mega Roller
8,000 lbs Super Stubby Mega Roller Operang Manual
Model Number: 3804
Operaonal Height: 14” - 26”
(top of wheel @ center hole)
Weight Capacity: 8,000 lbs.
Footprint: 36” x 36”
Max pipe diameter: 48”
Specicaons
3 x 10 urethane
over steel wheels
with bearings
Tri-handle for
height adjustment
under load

General Safety Instrucons
1. Do not misuse unit. Never aempt to operate the equipment at more than the recommended capacity.
Perform only the funcons for which the mega rollers are designed.
2. Keep alert. Never horseplay around equipment and keep bystanders at a safe distance. Do not allow
children to be in the work areas or operate mega rollers.
3. Keep work area clean. For unobstructed movement around the mega roller, always keep oor in work area
clear of cluer.
4. Examine the equipment. Prior to using B&B products, inspect all parts to ensure that they are in proper
operang condion. Inspect legs for metal deformaon, bends or breaks.
5. Wear proper personal protecon equipment. Welding helmet or hard hat, welding gloves and safety shoes
should be worn as a precauon while operang this stand.
6. Operate only on hard level surfaces. Use the mega roller only on smooth and level surfaces to avoid pping
and the possibility of operator injury.
Instrucons for Use
Read and understand the instrucons for safe performance. Always read operators manual before working
with jacks and stands. Understand the correct operaons, applicaons, and limitaons. Store this safety
manual in a clear area and always at a readily accessible site. Be especially aware of specic hazards. Extra
copies are available from B&B Pipe and Industrial Tools.
1. Check Mega Roller capacity rang and make sure it is not overloaded.
2. Check for damage before using. If damaged, remove from service and do not use.
3. Use on hard level surfaces. Be sure all feet of the Mega Roller are on the ground.
4. Only use Mega Roller for its intended purposes.
5. Place pipe onto Mega Roller slowly. Do not drop the pipe onto the Mega Roller.
6. To avoid pping, Mega Roller should be properly aligned so that the pipe rests on both of
the rollers of each Mega Roller being used. Never allow anyone under the pipe while it is supported by
the Mega Roller.
7. Do not remove components or alter the Mega Roller in any way.