Bano 5885EC Maintenance manual

Bano toilets and toilet seats
Care & maintenance instructions
BANO AS
Utstillingsplassen 3 6823 Sandane-Norway
Phone: [phone]
[email protected]
www.bano.co.uk
Rev. January. 09. 2018

• Toilet 530 / 700 mm: glazed porcelain
• Toilet seat: ABS hygienic plastic
• Fittings: stainless steel
Products:
Material specification
Bano toilets and toilet seats
Maintenance
Warning
Thank you for taking the time to read these instructions carefully – it is a time well spent!
5885EC Bano easy clean toilet bowl 530 mm
5995EC Bano easy clean toilet bowl 700 mm
5970-03 Bano toilet seat - white
5970-06 Bano toilet seat - grey
5970-04 Bano toilet seat - black
5970-07 Bano toilet seat - red
The product, which is made of porcelain, requires only minimum maintenance. Use a soft cloth or sponge
with a mild cleaning agent. For a shining surface, use a detergent designed for cleaning windows.
Removing stubborn stains
You can often use stain remover to deal with stubborn stains from hard water or water that contains rust,
but make sure to rinse the product thoroughly after cleaning. Regular cleaning will help to protect the
surface of the product against marks and stains left by water. When needed, use a polishing agent to
refresh the appearance of the porcelain surface.
Toilet seats in everyday use in the healthcare sector are exposed to a large load sideways when moving
a patient from a wheelchair. The Bano toilet seat should always be fitted with the seat stabilizers bumpers
to limit load sideways. Over time, however, the bolts in the seat can loosen gradually and we recommend
tightening bolts 6 months after installation or when as needed.
Never use scouring agents or cleaning agents that contain strong chemicals. You must also make sure
never to spill hot water or place very hot items on the surface. The highest safe temperature is 80 ˚C (the
standard temperature of hot water from the tap is just 60 ˚C).
5995EC
5885EC