Bano 5920-BVT Maintenance manual

www.bano.co.uk
Bano swivel toilet
BANOAS
Rev: 05.02.21
Care & maintenance instructions
Industrivegen 22
6823 Sandane Phone: [phone]
[email protected]

Bano cistern with electrical engine is a wall bracket for heightadjustment of the
toilet bowl. The bracket is paired with Bano swivel toilet. The bracket can be
adjusted 200 mm by aid of the electrical engine. The electrical height adjustment
function is easily operated from anintegrated panel in both grab bars.
Technical information
Warning
5920-BVT Bano swivel toilet
Height-adjustable cistern
A standard mild detergent can be used for cleaning. Use a soft sponge or cloth together with a mild detergent.
Spray onto object and wipe away with a damp sponge or cloth. Detergents which contain alcohol and are
used in the pharmaceutical industry are OK. Other maintenance of movable parts is not necessary, but Bano
recommends regular use of the heightadjustment. If the height-adjustment is not functioning, please contact
Bano for assistance and guidance.
Power supply: U In: 230V AC/50Hz, I In: max. 3,9A, U Out: 24V DC, max. 120 VA IPX6
The cistern is intended for installation in zone 1 for permanent installation.
Power connection: Wall mounted junction box IP44 min. Connection must be done by electrician.
Water connection: 1/2’’ connection performed by qualified person.
Max static weight load, grab bar: 250kg
Max static weight load, toilet: 500kg
Max weight load during height-adjustment: 300kg (reduced speed must be expected).
Lifting speed: 12mm/s
Care and maintenance
Make sure never to use abrasive cleaners or detergents containing strong chemicals, abrasive powders,
chlorine, acids, methanol, methylated spirits, mineral spirits or toluene.
Waste management and recycling
This product can be recycled. Electrical components can easily be detached and submitted for recycling in
accordance with government requirements.
Function trouble: If the electric height adjustment cistern functions does not work, it has to be reset.
Hold switch panel button "down" within 10 seconds. Cistern will then start to go down as part of its reset
function. When the cistern is in the lowest position the system is reset, and will operate normally. If
description above does not work, consult your nearest Bano department.
Material specification
Main Frame: Corrosion Treated Steel, electrically galvanized
Cover: ABS / PMMA plastic with color code RAL9016.
Product information

5920-BVT Bano swivel toilet
Swivel toilet Module and toilet bowl
The product, which is made of porcelain, requires only minimum maintenance. Use a soft cloth or sponge with
a mild cleaning agent. For a shining surface, use a detergent designed for cleaning windows. You can use stain
remover to deal with stubborn stains from hard water or water that contains rust, but make sure to rinse the
product thoroughly after cleaning. Regular cleaning will help to protect the surface of the product against marks
and stains left by water. When needed, use a polishing agent to refresh the appearance of the porcelain surface.
Care and maintenance toilet bowl
Never use scouring agents or cleaning agents that contain strong chemicals. You must also make sure never
to spill hot water or place very hot items on the surface. The highest safe temperature is 80°C (the standard
temperature of hot water from the tap is just 60°C).
Thank you for taking the time to read these instructions carefully – it is a time well spent!
Warning
Grab bars: structural foam with polyurethane coating
Back rest: structural foam with polyurethane coating
Toilet seat:
ABS / PMMA plastic with color code RAL 7001
Toilet bowl: glazed porcelain
Standard cleaning agents can be used for cleaning. Use a soft cloth or sponge with a mild cleaning agent.
Spray onto the unit and wipe off with a moist cloth. Do not use scouring powder or steel wool, as this will damage
the finish. Cleaning agents that contain alcohol and are used in the pharmaceutical industry can be used.
A standard mild detergent can be used for cleaning. Use a soft sponge or cloth together with a mild detergent.
Spray onto object and wipe away with a damp sponge or cloth. Do not use scouring powder or steel wool, as
this will damage the finish. Cleaning agents that contain alcohol and are used in the pharmaceutical industry
can be used.
Material specification
Care and maintenance grab bar and back rest
Care and maintenance toilet seat
Never use scouring agents or cleaning agents that contain strong chemicals. Never use acids, methanol,
methylated spirits, white spirit or lynol.
Warning
Product information
The toilet seat can easily be rotated using a trigger mechanism
integrated in the grab bars. The bars can be lowered and raised.
The back rest and toilet seat cover can easily be removed for
cleaning.