Barco ACSAR User manual

www.barco.com
Acsar |Acsar2
Modular convenience
Quick and easy configuration - For the permanent or temporary con-
nection of almost any digital or analog input.
Convenient image Formatting, Switching and Routing
Advanced Barco Pixel Map Processing (PMP) for the scaling and refor-
matting of any standard or HD video or PC input to the native format
of the D-Cine Premiere DP30 (Acsar) and DP100 (Acsar2).
Simple operation
A wide range of operating features, via the D-Cine Premiere LCD touch
panel, PC or Barco RC5 infra red controller.
Special features
Powerful and convenient presentation features include a Preview
Monitor output for cueing, Seamless Switching of any selected input
and a selectable Picture in Picture (PIP) facility.
Alternative content input processor
Powerful, yet extremely simple to operate scalers and
routers designed to convert any in-coming signal to the
DVI digital input of the D-Cine Premiere Digital Projector
head.
With Acsar processors you can now take full advantage of
the potential of Digital Cinema to screen any standard of
digital advertising as well as a wide range of ‘alternative
content’ applications, from live broadcast sports, news
and current affairs, business presentations and HDTV to
art-house movies.
Acsar for D-Cine Premiere DP30 
Acsar2 for D-Cine Premiere DP100 $
DS Acsar aug04 03-08-2004 16:47 Pagina 1

ACSAR ACSAR2
Video inputs
• modules Hot plugable Hot plugable
• slots x 8 on back panel, x 4; front panel insert, click and play
each accepting the following input modules: SDI; HDSDI; DVI; RGsB and YUV video;
Analog RGBHV and RGsBHV; SDI; HDSDI; DVI; RGB UXGA; Analog Composite video
Analog Component and Composite video and S-Video with digital decoder
plus S-Video with digital decoder
(full standard PAL NTSC Secam)
Internal processing 10 bit 16 bit
Video output • DVI: 1 Digital Visual Interface • 2048 x 1080 @ 24/50/60 Hz
standard output 1280 x 1024 @ 24/50/60 Hz • Preview output analogue RGB
• Preview output analog RGB (1280 x 1024) (2048 x 1080 @ 60 Hz with OSD)
Communication interface connections In / Out: 2 x D9 RS 232 connectors Internal
Control Remote control Remote control
Push button front panel control & LCD display Input control via projector presets
Projector touch screen control Full configuration via Communicator software
Optional network control
Special features • Seamless switching • Seamless switching
• Picture in Picture (PIP) • 4 x Picture in Picture windowing
• Selectable four corner positions capabilities; any input, any size
• Remote controllable or front panel control
Power supply • Built in power supply 85 - 253 V auto-ranging • Via projector power supply
• Mains frequency: 50 / 60 Hz
Power consumption 200W 150W fully loaded
Supplied accessory Barco RC5 Remote Control Barco RC5 Remote Control
Size
• processor 19” rack (w) x 4u (h) x 400 (d) mm 19” rack (w) x 1u (h) x 500 (d) mm
with input modules with input modules
• optional patch panel 19” rack (w) x 1u (h) /
Weight
• processor only 10,3 kg / 22,7 lbs 9,94 kg / 21,9 lbs
• fully loaded ± 16,4 kg / 36,2 lbs depending on
input module configuration /
Safety regulations Complies with UL 1950 and EN60950 /
www.d-cine.barco.com
Acsar - Acsar2 specifications
Ref.no. R599545 - August 2004
Barco Projection Systems is an ISO 9001 registered company.
The information and data given are typical for the equipment described.
However any individual item is subject to change without any notice
The latest version of this product sheet can be found on www.d-cine.barco.com.
ITEA
Barco Digital Cinema - Belgium
Noordlaan 5, 8520 Kuurne
Tel: [phone] Fax: [phone]
e-mail: [e-mail]
Barco Inc. - USA
3240 Town Point Drive, Kennesaw, GA 30144
Tel: [phone] Fax [phone]
e-mail: [e-mail]
DS Acsar aug04 03-08-2004 16:47 Pagina 2