Barton 90071 Original instruction manual

BAMBOO TWO TIER SHOE BENCH
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER)
OWNER’S MANUAL AND SAFETY INSTRUCTIONS
ITEM: 90071 & 90072
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: 909.628.0880 MON-FRI 9AM TO 3PM PST

1
PRODUCT INFORMATION
This multi-level shoe bench is made form long-lasting, sturdy Bamboo.
This multi-functional bench is great for storing items such as shoes, purses,
towels plants and more. This bench is perfect for any bedroom, balcony,
living room, patio and more.
Weight limit: 264lbs
Materials: 100% Bamboo
Dimensions: 44.1”L x 11.1”W x 17.7”H (112cm x 28.3cm x 45cm)
Solid Construction
Rust resistant durable screws

2
IMPORTANT INFORMATION
Identify, sort and count the parts before attempting
assembly.
For convenience, unbox your new stand in the
area you will be placing it.
DO NOT use harsh chemicals or abrasive cleaners
on this item.
BEFORE YOU START
Read through each step carefully and follow the proper order.
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
NEVER push, pull, or drag your shelving unit.
DO NOT use power tools to assemble this item.

ASSEMBLY
PARTS INCLUDED:
3
STEP 1. Use the screws and inner nuts to connect cross bar and legs.
L-HEX
WRENCH
SCREWS X44 L-HEX
WRENCH
NUTS X20 INNER NUTS
X24
NOTE: Install the long bar rst, then the short one.
STEP 2. Use the screws and nuts to x the bench table to the legs.
PRODUCT MADE IN CHINA

MAINTENANCE
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only and are not available individually
as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
SAVE THESE INSTRUCTIONS
4
PRODUCT MADE IN CHINA