Barton 90140 Original instruction manual

OWNER’S MANUAL AND SAFETY INSTRUCTIONS
Outdoor Wicker Float Storage Bin
ITEM # 90140
SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATION, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL, OR THE MONTH AND YEAR OF PURCHASE IF
PRODUCT HAS NO SERIAL NUMBER
FOR QUESTIONS, PLEASE CALL CUSTOMER SERVICE: 909.628.0880

PART LIST
A B CD
F
Back Panel
1 PC
Bottom Panel
1 PC
Side Panel
2 PCS
Front Panel
1 PC
Divider
2 PCS
HARDWARE LIST
#1 #2 #3 #4
Short Bolt
8 PCS 16 PCS
Washer
24 PCS
M6*15mm M6*40mm
EXTRA HARDWARE LIST
M6mm
E
Bottom Frame
1 PC
G H
M6mm
Long Bolt Allen Key
1 PC
#1 #2 #3
Short Bolt
2 PCS 3 PCS
Washer
3 PCS
M6*15mm M6*40mm M6mm
Long Bolt
Swivel Caster
2 PCS 2 PCS
Locking Caster
2

Step 1.
Step 2.
Lay back panel (part #A) down on a flat surface.Attach
bottom panel(part #B) to back panel(part #A) using the long
bolts(part #2), washers(part #3) & allen key (part #4).
Attach side panels (part #C) to back panel (part #A) using
long bolts (part #2), washers (part #3) & allen key (part #4).
A
B
X2
#2
X2
#3
NOTE: Please do not fully tighten bolts until unit is fully
assembled.
X4
#2
X4
#3
A
B
C
C
3

Step 3.
Step 4.
Attach front panel (part #D) to assembled parts (part #A,B&C)
using long bolts (part #2), washers (part #3) & allen key (part
#4).
Attach bottom frame (part #E) to assembled parts (part
#A,B,C&D) using the long bolts (part #2), washers (part #3) &
allen key (part #4).
X6
#2
X6
#3
X4
#2
X4
#3
A
C
B
E
A
D
C
C
4

Step 5.
Step 6.
Attach swivel caster (part #G) and locking caster (part #H) to
bottom frame (part #E).
Carefully turn the cabinet over so the casters are on the floor.
Attach dividers (part #F) to bottom frame (part #E) using short
bolts (part #1), washers (part #3) & allen key (part #4).
NOTE: Please fully tighten all bolts at this time.
G
H
A
C
B
E
X8
#1
X8
#3
5

OF NOTE
6
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT
PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
MADE IN CHINA
DISCLAIMER
6
6
6