Barton BISTRO 93554 Original instruction manual

BISTRO CHAIRS W/ TABLE
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER)
OWNER’S MANUAL AND SAFETY INSTRUCTIONS
ITEM: 93554 /TAN 93555/GREY
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: 909.628.0880 MON-FRI 9AM TO 3PM PST

1
IMPORTANT SAFETY INFORMATION
When installing and assembling, it is recommended that 2 or more adults are involved in the setup.
Please read and follow all safety statements, warnings, assembly instructions, use &
care directions before attempting to assemble the patio set.
Please do not exceed the weight limitations of this item.
This package contains small items and plastic bags that should be kept away from children.
Ensure that all connectors & poles are rmly secured in position fully. It is important to do so before use
so as to avoid collapsing or damage to the item, which could result in injury.
WARNING: Keep ame and heat sources away from the cushion fabric. The fabric may burn if it is
exposed to prolonged contact with a source of heat. NEVER barbecue near this swing or use lanterns
that contain naked ames.
SAVE THESE WARNINGS
GENERAL SAFETY WARNINGS
DO NOT clean fabrics using organic solvents; do not spot clean stains - this type of fabric is not suitable
for cleaning. Do not use chlorine bleach, do not dry clean.
Avoid heavy soiling of material. Soiled coated fabrics should be cleaned by hand washing. Squeeze
gently, do not rub, do not wring.
Before assembling the patio set, check that the swing parts is not damaged (bent metals elements, torn
fabric). In case of damages do not use the product. Contact Barton Customer Service if there are any
missing or damaged parts. Failure to comply with these guidelines will/can lead to further damage and
possible personal or property damage.
Do not stand on or use any part of this item as a step ladder.
Do not use this item in a way inconsistent with the manufacturer’s instructions.

2
PARTS LIST

ASSEMBLY
3
1
2
Place the seat on top of the
base and secure it with 4 screws
and 4 washers. Make sure the
screws are tightened.
Place the seat and back cushion
on the chair.

OF NOTE
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIEDAND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only and are not available individually
as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
SAVE THESE INSTRUCTIONS
4
PRODUCT MADE IN CHINA