Barton 93561 Original instruction manual

OWNER’S MANUAL AND SAFETY INSTRUCTIONS
3PC ACAPULCO CHAIR SET
ITEM # 93561 AQUA | 93562 GREY | 93563 BLACK | 93564 BURGUNDY
SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATION, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL, OR THE MONTH AND YEAR OF PURCHASE IF
PRODUCT HAS NO SERIAL NUMBER
FOR QUESTIONS, PLEASE CALL CUSTOMER SERVICE: 909.628.4900

SAFETY INFORMATIONPARTS LIST
CHAIR SEAT
CHAIR LEGS
GLASS TABLE
TOP
TABLE BASE
TABLE LEGS
ITEM ITEM DESCRIPTION QTY
1
4
1
1
3
A
#
B
C
D
E
1

2
A. CHAIR SEAT x 1PC x 4PCS
A
B
B. CHAIR LEGS
STEP 1. Place the seat (A)
on a protected, at surface.
Prior to assembly, lay all parts out and conrm that all parts are present and none are
damaged. If any parts are damaged, please contact customer service for a replacement.
STEP 2. Screw in each of
the four legs (B) into the base
slots into the back of the seat
(A), clockwise until completely
tightened.
CHAIR ASSEMBLY
1

TABLE ASSEMBLY
3
C. GLASS TABLE
TOP
D. TABLE BASE E. TABLE LEGS
x 1PC x 1PC x 3PCS
STEP 1. Place the table base face down (D)
on a protected, at surface.
STEP 2: Screw in each of the three legs (E)
into the base slots into the back of the table
base (D), clockwise until completely tightened.
Flip the table upright.
STEP 3: Gently place the glass table top (C)
onto the table.
OF NOTE
4
OF NOTE
SAFETY INFORMATION DISCLAIMERTABLE ASSEMBLY
E
D
C

TABLE ASSEMBLY
3
OF NOTE
4
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT
PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
MADE IN CHINA
OF NOTE
SAFETY INFORMATION DISCLAIMERTABLE ASSEMBLY