Bartscher CHEF IDEE CI 10L User manual

CI 10L
200072
Original
-
Gebrauchsanleitung
V1/0816

- 19 -
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 20
1.1 Key to symbols..................................................................................................... 20
1.2 Safety instructions................................................................................................ 21
1.3 Proper use............................................................................................................ 25
2. General information................................................................................................ 26
2.1 Liability and Warrantees....................................................................................... 26
2.2 Copyright protection ............................................................................................. 26
2.3 Declaration of conformity...................................................................................... 27
3. Transport, packaging and storage......................................................................... 27
3.1 Delivery check...................................................................................................... 27
3.2 Packaging............................................................................................................. 27
3.3 Storage................................................................................................................. 28
4. Technical data......................................................................................................... 29
4.1 Overview of parts ................................................................................................. 29
4.2 Technical specification ......................................................................................... 30
5. Installation and operation....................................................................................... 31
5.1 Installation............................................................................................................ 31
5.2 Operation.............................................................................................................. 32
6. Cleaning and descaling.......................................................................................... 34
7. Waste disposal........................................................................................................ 36
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]
GB/UK

- 20 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions
in this instruction manual.
1.1 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.

- 21 -
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use. Ignoring this
warning may result in burns!
HOT STEAM!
This symbol indicates that during the operation the hot steam escapes from the
device. Risk of scalding if safety instructions are not observed!
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.2 Safety instructions
• The device can be used by children 8 years and up, as well as by
people with disabilities and those with limited experience/knowledge
as long as they are under supervision or have been instructed on
proper use of the device and its possible dangers. Children should
not play with the device. Cleaning and maintenance cannot be
performed by children younger than 8 years old and must be done
under supervision. Children under the age of 8 years old must be
kept away from the device and its power cord.
• Never leave the device unattended when in use.
• Only use the device indoors.

- 22 -
•
This device may only be operated in technically proper and safe
condition.
• Prevent access of children to the package materials like plastic bags
and foamed polystyrene elements. Suffocation hazard!
• Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the device.
Do not attempt to repair the device yourself.
• Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous for the
user or lead to damages of the device or personal injury, and further,
the warranty expires.
• To prevent hazards and to ensure optimum efficiency, no modifications
or alterations to the device that are not explicitly approved by the
manufacturer may be undertaken.
DANGER! Electric shock hazard!
To avoid the hazard results please follow the safety instructions below.
• Never allow the power cable to come into contact with heat sources or
sharp edges. The power cable should not hang over the side of the
working surface. Ensure that no one can step on or trip over the cable.
• The power cable must not be folded, bent or tangled, and must always
remain fully unrolled. Never place the device or other objects on the
power cable.
• Do not lay the power cable over carpets or other inflammable
materials. Do not cover the cable. Keep away the cable from
operating range and do not immerse it into water.

- 23 -
•
Check the power cord regularly for damage. Do not use the appliance
if the power cord is damaged. If this cable is damaged, it must be
replaced by customer service or a qualified electrician in order to avoid
dangers.
• The supply cable must be disconnected from the socket only by
pulling the plug.
• Never carry or lift the device by the supply cable.
• In any case do not open the device housing. In case of electrical or
mechanical modifications the electric shock hazard will occur.
• Never immerse the appliance, the power cord and the power plug in
water or other liquids.
• Do not use any acid agents and make sure no water ingresses the
device.
• Never operate the device with moist hands or standing on wet floor.
• Remove the plug from its socket:
- when the device is not used,
- in case of anomalies during operation,
- before cleaning.
WARNING! Burn hazard!
To avoid the hazard results please follow the safety instructions below.
• The tank surface gets very hot when the device is in use! In order to
avoid burns of fingers and hands do not touch hot surfaces of the
device! During operation touch only handles and switches designed
for such purpose.
• The surface and water in the tank are hot for some time also after
turning the device off, leave it for cooling down before cleaning or
moving.

- 24 -
HOT STEAM! Risk of scalding!
To avoid the hazard results please follow the safety instructions below.
• Follow the maximum filling capacity! Overfilling may lead to hot water
leaks and burns!
• Never remove the lid during boiling! The released hot steam may
cause burns of hands, arms, and face.
WARNING! Health hazard due to microbes!
To avoid the hazard results please follow the safety instructions below.
• The water tank must be periodically emptied, cleaned, and
disinfected to eliminate the possibility of growth of harmful and
dangerous microbes.
WARNING!
In order to avoid any damages of the device follow the instructions
below:
• Never wash the device or its elements in the dishwasher.
• Do not use any sharp objects or abrasive cleaning agents for
surface cleaning.
• Do not use the device when the water tank is empty.

- 25 -
1.3 Proper use
The operational safety of the device is assured only in case of proper use, according
to the operation manual.
All technical activities like installation and maintenance must be performed by the
qualified service personnel only.
The hot water dispenser is not designed for continuous operation in industrial
applications.
The device is designed for use at home and in similar places:
→in canteens for employees in shops, offices, and similar areas;
→in agricultural farms;
→for the customers in hotels, motels, and other typical accommodation places;
→in breakfast restaurants.
The hot water dispenser is designed only for boiling and heating water.
The hot water dispenser must not be used for:
-cooking food;
-placing and heating of flammable, harmful, and quickly evaporating
liquids or materials, etc.
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.
The operator is liable for all damages resulting from inappropriate use.

- 26 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
-violation of advice concerning operation and cleaning;
-use other than designed;
-alterations made by user;
-use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.

- 27 -
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.

- 28 -
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
-do not store outdoors.
-keep it dry and dust-free.
-do not expose it to aggressive media.
-do not expose it to direct sunlight.
-avoid mechanical shocks and vibration.
-in case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly, If required
refresh or renew.

- 29 -
4. Technical data
4.1 Overview of parts
1Lid
2Lid handle
3Tank handle
4Water tank
5Operation elements
6Base unit
7Outlet tap
8Fill level indicator
2
1
6
3
4
5
7
8

- 30 -
Control elements
A
Heat up indicator (orange)
B
Keep warm indicator (green)
C
ON/OFF switch
D
Temperature controller knob
E
Reference mark for device adjustment
F
“OFF” position of temperature control knob
4.2 Technical specification
Description Hot water dispenser CI 10L
Code no.:
200072
Material: stainless steel
Realization: with fill level indicator
indicator lamps: heat up, keep warm
Temperature range: 30°C – 100°C
Capacity: 10 litres
Power supply: 1.6 kW / 220-240 V 50/60 Hz
Dimensions: W 300 x D 295 x H 470 mm
Weight: 2.0 kg
We reserve the right to make technical changes!
D
C
B
A
E
F

- 31 -
5. Installation and operation
5.1 Installation
Positioning
•Unpack the device and remove all packing material.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
•Never place the device at the edge of a table to avoid accidents.
•Never place the device in humid or wet environment.
•Never place the device on the flammable surfaces.
•Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device (see
rating plate). Connect the device only in case of compliance!
Connect the device only to properly installed single socket
with protective terminal.
•The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

- 32 -
5.2 Operation
•before the first use wash the device according to instructions in section 6 “Cleaning
and descaling”.
•Pour required amount of fresh water to the device (only up to “MAX” mark).
•It is important that the potable water is always present in the tank during the device
operation. Do not fill the device with any non-potable liquids, like acids, lyes, oils,
nitrates, etc.!
NOTE!
To reduce heating time warm water may be used. Time and energy
are saved in such way!
•Put the lid on the tank and rotate it
clockwise to close the tank (bayonet lock).
•Pay attention to position the steam outlet
hole in the lid in the front, above the fill level
indicator.
•Connect the device to the single grounded socket.
•Set required temperature in range from 30°C to 100°C with use of temperature
control knob.
•Turn the device on with use of ON/OFF switch. The orange heat up indicator will
come on during the heating phase.
•The device needs approx. 35 minutes to boil water when completely filled. Then the
device switches to the keep warm mode and orange indicator comes on.
•When water temperature in the tank drops to approx. 93°C, heating is activated again,
orange indicator comes on, and water is reheated to preset temperature.
•Hot water may be used for preparation of required drinks (tea, coffee, instant coffee,
bouillon, etc.).
•Keep in mind than various types of tea required different water temperature.
Follow the instructions on the packages.
Steam outlet hole

- 33 -
•To use hot water put appropriate container
(glass, cup, mug) under the drain tap.
Press the tap lever down and hold it to
receive required amount of water.
Then release the lever, the tap will
close automatically.
•Control the tank fill level with use of indicator.
WARNING!
Periodically check the fill level, refill with water when required.
Never use the device without water!
•Before refilling turn the device off.
•Carefully remove lid and pour required amount of water. During operation touch only
handles and switches designed for such purpose.
•After use rotate the temperature control knob counterclockwise to “OFF”
position, turn the device off with use of ON/OFF switch and disconnect it from
the power supply (pull the plug!).
•Leave the remaining water in the tank for cooling down, then drain it with use of
drain tap to another container.
The device is equipped with overheating/dry operation protection. In case of
accidental start-up without water or with its insufficient amount the protection will
be activated and the device will be automatically turned off.
Disconnect the device from the power supply (pull the plug!) and wait for
cooling down.
Empty the water tank after cooling down.
Press pin (RESET) on the bottom of the device.
Then fill the tank with fresh water and use the device.
RESET

- 34 -
6. Cleaning and descaling
CAUTION!
Disconnect the unit from the power supply (unplug!) before
cleaning.
Do not use a pressure washer to clean the device!
Be careful and do not let the water into the unit.
WARNING!
Do not use any sharp or abrasive cleaning materials as they may damage
the device surface.
Regular cleaning
oClean the device after each use.
oWash the water tank interior with gentle washing agent and thoroughly rinse in
running water. To clean the drain tap flush it with clean water.
oLid should be washed and rinsed in warm running water.
oWipe the external surfaces of the device with moist, soft cloth, use gentle cleaning
agent when required.
oDry the device with soft, clean cloth.

- 35 -
Descaling
CAUTION!
Complaints will not be taken into consideration when the device
is not periodically descaled according to the instructions.
Such complaints are no cases of warranty!
Descale the device regularly!
oInappropriate water may lead to scale deposit in the water tank. This results in longer
heating time and might damage the device. To reduce scaling it is recommended
to use filtered water when possible!
oWe recommend ecological descaling with use of vinegar or citric acid.
Prepare water and vinegar solution (ratio 3:1) or water and citric acid
solution (2 tablespoons per 1 l of water) and pour it into the tank. Wait some
time (approx. 1 hour) and boil the solution.
oAllow it to cool down.
oAfter cooling down drain the descaling solution and rinse the tank with clean water
for a few times. To remove the descaling solution completely, drain some water
through the drain tap.
oWhen using other commercial descalers follow the manufacturer's instructions.
Storage
oIf the device is not used for any lengthy period, clean it according to the aforemen-
tioned description and store it in dry, clean place protected against cold, sun and
children. Do not place any have objects on the device.

- 36 -
7. Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste
device unfit for use before disposal. For that purpose
disconnect device from mains supply and remove mains
connection cable from the device.
CAUTION!
For the disposal of the device please consider and
act according to the national and local rules and
regulations.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]