Bartscher K3600L User guide

K3600L
109847

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Service hotline: [phone]
www.bartscher.com
Version: 1.0
Date of preparation: 2022-08-12
Original instruction manual
EN

109847 3 / 8
EN
Technical Data
Name:
Water filter system K3600L
Art. No.:
109847
Material:
plastic
Performance level: litres / at °KH
(carbonate hardness)
3600 / 10
Water connection:
3/8"
Water supply temperature in °C
2 - 30
Water pressure, in bar:
3
Dimensions (W x D x H), in mm:
180 x 145 x 4350
Weight, in kg:
3,4
We reserve the right to implement technical modifications.
Version / Design
•Version:
–single use system
–for vertical mounting
•Designed for:
–Coffee machines
–Combi-steamers
•Features:
–Activated carbon filter made of renewable vegetable raw materials
–Removal of chlorine and impurities
–Reusable filter head
–pH neutral
–Reduced carbonate hardness
–Reduction of TDS (Total Dissolved Solids)

4 / 8 109847
EN
Intended Use
The water filtration system is designed to reduce the carbonate hardness (KH) and
the water dissolved solids (TDS) content of the tap water.
Equipment included
1. Wall Holder (1x)
2. Filter head (1x)
3. 3/8’’ adapter for plastic hose Ø10 mm
(2x)
4. Water filter cartridge (1x)
Fig. 1

109847 5 / 8
EN
Accessories (not included in the delivery)
KE3600L replacement cartridge
•Material: plastic
•Colour: White
•Designed for:
–K3600L water filtration
system
•Performance level: 3600 litres /
at 10 °KH (carbonate hardness)
/ 0-3 litres/min.
•Water supply temperature: 2 °C
to 30 °C
•Dimensions: 130 x D 130 x H
420 mm
•Weight: 3.1 kg
Art. No. 109848
Water meter W3B-1
•Material: plastic
•Colour: steel grey
•Designed for:
–K3600L water filtration system
•Water supply temperature: 2 °C to 30 °C
•Water connection: ¼’’
•Water pressure: 3 bar
• Powered by: 2x AA batteries
•The set includes:
–2x AA batteries
–1/4’’ to 1/8’’ adapter
–¼ “ adapter for plastic pipe Ø 10
mm
–wall holder for the control panel
•Dimensions: 110 x D 65 x H 95 mm
•Weight: 0.25 kg
Art. No. 109849

6 / 8 109847
EN
Installation
1. Install a water filter system near the water connection and the machine.
2. Attach the wall holder to the desired location.
3. Hang the water filter system (water filter cartridge with the filter head screwed
on) on the wall holder.
4. Connect the supply hose (1) of the drinking water line and the drainage hose (2)
of the treated water to the appropriate 3/8’’ passages on the filter head (Fig. 2).
HINWEIS!
The supply hose and drain hose are not part of the delivery!
Fig. 2
The water filter system is now ready.
Water meter (optional, part no. 109849)
Program the water meter in accordance with the instructions in the manual.
The water meter indicates the need to replace the water filter cartridge based on the
capacity of the device, determined after checking the hardness of the drinking
water. It should be replaced as described in the section "Replacing the water filter
cartridge".

109847 7 / 8
EN
Performance level
The performance level depends on the hardness of the water (KH carbonate value).
Check the water hardness in the place where the water filtration system is installed
and on this basis, use the table below to determine the capacity:
Water hardness (dH –
German degrees)
Capacity (litres)
10
3600
11
3273
12
3000
13
2769
14
2571
15
2400
16
2250
17
2118
18
2000
19
1895
20
1800
21
1714
22
1636
23
1565
24
1500
25
1440
26
1385
27
1333
28
1286
29
1241
30
1200

8 / 8 109847
EN
Replacement of the water filter cartridge
When the performance of the water filter cartridge is reached, replace it with a new
one. Perform the following steps (fig. 3):
1. Close the drinking water tap.
2. Unscrew the used water filter element from the filter head.
3. Check that the gaskets on the filter head are in place and not damaged.
4. Screw the new water filter element into the filter.
5. Open the drinking water supply
6. Rinse the water filter cartridge briefly before use.
Fig. 3
NOTICE!
For reasons of hygiene, the water filter cartridge is to be replaced after 6
months, even if its maximum performance has not yet been reached.