Baseus Mulight QC3.0 User manual

User Manual for Baseus Mulight Quick
Charge 3.0 / Power Delivery 3.0 Power
Bank

Specifications
- Outputs: USB Type-C, MicroUSB, USB Type-A
- Charging protocols: PD3.0,QC3.0,SCP,FCP, etc.
- Max charging power: 45W
- Cell type: Li-polymer
- Weight: 230g
1. Power button
2. USB2 port
3. Lightning port
4. MicroUSB port
5. Type-C port
6. USB1 port
7. LED display

Charging your devices
1) Check and make sure that the charging voltage of your device is consistent
with the charging output of this power bank.
2) Use the original charging cable of your device, connect one end to it and the
other end to the Baseus Mulight power bank.
3) The power bank will automatically start to charge your device and it will show
the output power on the LED display.
Charging the power bank using a power adapter
Please be noted that the power adapter is NOT included in the package. Use
your own power adapter to recharge the Baseus Mulight power bank.
1) Select and use the original USB cable that comes with the power adapter
2) Connect the cable to the Lightning, MicroUSB, or Type-C port of the power
bank
3) Connect the other end of the cable to the power bank and plug the adapter
into the outlet.
4) The LED indicator will start to flash which means it’s charging. Once it’s fully
charged, the indicator will light constantly.