basIP AQ-07LW User manual

USER MANUAL
IP INDOOR VIDEO ENTRY PHONE
AQ-07LW

AQ-07LW
IP INDOOR VIDEO ENTRY PHONE
The AQ-07LW is designed to upgrade an existing or legacy 2-wire intercom
system in an apartment building or other buildings, to be used in modern
IP intercom systems.
It can be connected to some older 2-wire cable systems in buildings without
changing the cable.
Main features
Display: 7” TFT LCD, capacitive
touchscreen.
Screen resolution: 800 x 480.
Built-in camera: No.
Power: Po2W
(power over 2-wire port).
Power consumption: 6 W,
standby 2.5 W.
Dimensions: 235 x 145 x 18 mm.
Colors: Black, White.
Body: Plastic.
Installation Type: Wall mount.
Full User Manual
Device description
wiki.bas-ip.com
Screen.
Loudspeaker.
Microphone.
1
2
3
-
-
-
1
2
3
Appearance

Completness check of the product
Before installing the monitor, be sure to check that it is complete and all
components are available.
The monitor kit includes:
Monitor
Manual
Wall mounting bracket
Set of wires with connectors for connection of alarm loops, doorbell
and home automation
Resistors for alarm loops
Installation screws
1 pc
1 pc
1 pc
1 pc
8 pcs
2 pcs
After verifying the device's completeness, you can switch to the monitor
connection.
To connect monitor you will need:
Electrical connection
2-wire cable
AWG21
AWG20
AWG18
AWG17
AWG15
RVV 2x0.4
RVV 2x0.5
RVV 2x0.75
RVV 2x1.0
RVV 2x1.5
= up to 50 meters
= up to 60 meters
= up to 80 meters
= up to 90 meters
= up to 110 meters
Cable length recommendations
Wires must be brought for the connection of alarm loops and home
automation (optional).
EAN: 5060514914878 (WHITE)EAN: 5060514914847 (BLACK)

Wiring diagram using a two-wire switch
MAIN IN POWER LAN1 LAN2 MAIN OUT
Link/Act
CHANNEL1 CHANNEL2 CHANNEL3CHANNEL4 CHANNEL5CHANNEL6CHANNEL7 CHANNEL8
12
Siren
V+ GND
RS485
1234
+12VGND 485+ 485-
123456 7 8 9 10
GND
+12V AL1 AL2 AL3 AL4 AL5 AL6 AL7 AL8
Alarm
12
2 Wire
L+ L-
SH-46T / SH-47T
Doorbell
+12VGND OUT
SW-08 / SW-10
2-wire switch
Wiring diagram using a two-wire converter
12
Siren
V+ GND
RS485
1234
+12VGND 485+ 485-
123456 7 8 9 10
GND
+12V AL1 AL2 AL3 AL4 AL5 AL6 AL7 AL8
Alarm
12
2 Wire
L+ L-
SH-46T / SH-47T
Doorbell
+12VGND OUT
SW-01
Ethernet to 2-wire converter
LAN
2Wire
Power

Mechanical mounting
Attach the bracket in the outlet box using set screws and a phillips head
screwdriver.
Installation of the monitor on the bracket is done from top to bottom.
Before installation of a monitor, it is necessary to drill a hole or a recess into
a wall with a 68 mm (2.68in) diameter under the standard mounting box for
a 65x45 mm (2.56x2.13in) socket. It is necessary for switching of wires and
installation of the monitor.
Mounting box Screws Monitor
235 mm
145 mm
18 mm
Monitor Bracket
60 mm
59 mm
117 mm
86 mm
80 mm
150-160 cm
68 mm
EAN: 5060514914878 (WHITE)EAN: 5060514914847 (BLACK)

Warranty
The warranty card number
Model name
Serial number
Seller name
With following stated terms of warranty is familiar, functional test was
performed in my presence:
Customer signature
Warranty conditions
The warranty period of the product — 36 (thirty-six) months from
the date of sale.
Transportation of product must be in its original packaging or supplied one
by the seller.
The product is accepted in warranty repair only with a properly filled warranty
card and the presence of intact stickers or labels.
The product is accepted for examination in accordance with the cases
provided by law, only in the original packaging, in a full complete set,
appearance corresponding to the new equipment and presence of all relevant
properly filled documents.
This warranty is in addition to the constitutional and other consumer rights
and in no way restrict them.
Terms of warranty
The warranty card must indicate the name of the model, serial number,
purchase date, name of the seller, seller company stamp and
the customer’s signature.
Delivery to the warranty repair is carried out by the buyer himself.
Warranty repairs carried out only during the warranty period specified
in the warranty card.
The service center is committed to do everything possible to carry out
the repair warranty products, up to 24 working days. The period spent
on the restoration of product functionality is added to the warranty period.

Notes
EAN: 5060514914878 (WHITE)EAN: 5060514914847 (BLACK)

www.bas-ip.com