basIP SP-03 User manual

Button functionality
of sp-03
sp-03
IP AUDIO HANDS-FREE
quickstart guide
Full User Manual
wiki.bas-ip.com
2
1
3
4
5
6
7
8
9
Loudspeaker
DND mode
Concierge button
Volume DOWN
Volume UP
Answer call / Handup
Open the lock
LED status indicator
Microphone
• Normal mode (standby mode) - constant turquoise backlight.
Pressing the volume button during a call - flashing the turquoise•
backlight 1 time, then returning to the backlight of the current mode.
Incoming / outgoing call - flashing green backlight.•
Conversation - constant green illumination.•
The microphone is turned off during a conversation - alternately flashing•
red and green lights.
«Silent» mode is on - constant red backlight.•
Initialization mode in Link - alternate flashing of different backlight colors.•
Indicator light statuses:

SP-03 has 6 buttons, each of which, with a short or long (3 seconds
before the beep) press, has its own functionality.
Button functionality
Long pressShort press
Enable / disable the
«Do Not Disturb» mode for
8 hours from the moment
it is pressed
Disabling the alarm
Short press Long press
Concierge call SOS call to concierge
monitor
Long pressShort press
During outgoing and incoming
calls, you can turn down the
device volume. During a call,
you can turn the microphone
on/off
Downward lift call
(with EVRC-IP module
connected)
Short press Long press
During outgoing and incoming
calls, you can increase the
device volume
Lift call up
(with EVRC-IP module
connected)
Short press Long press
Accept/end an incoming call
or cancel an outgoing call.
In normal operation, you can
call the first fixed number
(if the function is enabled).
In normal operation, you can
call the second fixed number
(if the function is enabled)
Short press Long press
Open the door before answering
the call or during a conversation.
In normal mode, you can call the
security number
(if the function is enabled)
Activation of initialization
in Link (automatic acquisition
of settings)