basIP AU-04LA User manual

AU-04LA
IP INDOOR VIDEO ENTRY PHONE
quickstart guide
Full User Manual
wiki.bas-ip.com
privacy in their conversations.
of interior.
Control of the intercom is possible with the help of mechanical keys and
a touch screen. Classic black and white body color suitable for any style
One of the interesting features of the AU-04LA is the ability to connect
an additional SP-AU handset. This solution is ideal for those who want
1Microphone
24.3” Display
3
4
5
6
7
8
Monitoring
Open
Call
Photo frame mode
Concierge
Loudspeaker

MAIN SCREEN AND SECURITY MENU
Time
DND menu
DND status
Message status
Security menu
SIP status
Missed calls
Weather
Security
menu Home automation
menu
Intercom
menu Service menu Settings menu
News line
Main screen
Security menu
In this menu, you can turn on / off the alarm, make settings for loops,
scripts and go to the IP Camera view menu.

Security ON/OFF IP camera settings
There is from 1 to 8 IP cameras available
for display.
Select a camera in the list
by scrolling through the list and clicking
on the camera name.
Stop button
Play button
Zone settings
• №: Number of the sensor.
• Type: Type o the sensor.
Normal mode - the sensor is activated only when the system
is armed and if this sensor is selected in the paragraph above.
Usually this type is used for door and window sensors.
Emergency and 24 hours - is active constantly.
These types can be selected when flood sensors, gas, volume,
smoke and heating are connected to the loops.
• Mode: Mode of the sensor.
It depends on the sensor used.
• 3C - activation is performed when switching position
NO - normally open sensor, activation is performed when•
the contacts are closed
NC - normally closed sensor, activation is performed when•
the contacts open
Bell - doorbell connection mode. When the contacts are•
closed, the monitor will start playing the incoming call melody.
• Delay: Delay before activating a specific sensor.
• Sensor: Selects the display type of the sensor
for additional informativity when triggered.
Display during an alarm
By setting the required value for the
connected sensor, the sensor number
and its name will be displayed on the
monitor when the alarm is triggered.
Display with zone settings
Main security display
To disable alarm you need to enter password.
By default, password is 1234.

Scene settings
After clicking this button, the following
interface will be displayed like here.
A total of 3 scenarios are available:
Outside the house, Home and Sleep.
Depending on each scenario, you can customize
the logic of the triggering of various loops.
Activation time: The time after which a particular
scenario is activated.
Settings
Old password: Current password input field.
By default, user password is 1234.
New password: New password input field.
Confirm: New password confirmation field.

Home automation menu
Scenes
You can choose one of the scripts, previosly
defined and written in automation modules
through software in advance.
Lights
This menu allows different groups of lights
to be controlled in separate rooms
(using module SH-62).
Air conditioning
This menu allows controlling air
conditioners in separate rooms.
Curtains
This menu allows controlling curtains
in separate rooms.
Main screen
The automation menu looks like this
and includes five submenus.
Elevator
In this menu, you can call the elevator
(when using the elevator control module
EVRC IP).

Intercom menu
Main screen
CALL
Calls between intercoms
To call between internal monitors in different
apartments, you need to enter from 1 to 4 digits
of the house number and press the «Building»
button, then enter 2 digits of the front room
number and press the «Door» button, then enter
from 1 to 4 digits of the apartment number and
press the button call To delete an incorrectly
entered digit, use the «Delete» button.
Calls between additional monitors
To call additional intercoms, or to call the main
intercom, you must select the desired one
from the list (Main, Alt. 1 - Alt.9) and press
the call button.
Answer the incoming call
During the incoming call the following interface
will appear:
Decline call
Make a snapshot
Send lock release
command

Monitoring
In this menu you can monitor outdoor panels
which are connected in the same LAN.
Lock release
Starting viewing
button
Pause viewing
button
Switching between viewing
of individual and multiapartment
panels.
Switchnig between panel is going
by pressing Left and Right arrow
buttons.
In this mode, communication will take place in one-way mode, i.e. You will hear what is happening at the panel,
but you will not be heard.
Records
Incoming calls
Outgoing calls
Missed calls
• Number: Number of dialer.
Date: Date and time of the call.•
Lenght: Conversation lenght.•
In order to highlight the desired call, you need to press it once.
By pressing the buttons below you can call back to the selected number, scroll through
the list or delete the entry.

Services menu AND SETTINGS
SMS
This menu dispalys messages which was sent
from LINK software.
Browser
In this menu a pre-set web page apperas.
You can set up a desired page through
web interface.
SERVICES MENU
Password
• Old password: Current password
input field.
• New password: New password input
field.
Confirm: New password confirmation•
field.
By default, user password is 1234.
System
• Volume: The volume of the system
sounds.
Communication: Speaker volume•
during a call.
Language: System Language.•
Time Zone: Select Time Zone.•
Auto Answer: Automatically receive•
all incoming calls.
Device settings
• Building number: 0001-9999
Unit: 00-99•
Floor number: 00-99•
Room number: 01-99•
Device: The sequence number•
of the monitor in the system.
If the monitor is one, it is necessary to set «0»
in this line. If there are several monitors, then
the numbering should begin with «0» and end
with «8».
• Sync code: Synchronization code
between monitors and panels for
intercom.
settings
Communication
• Camera: Activates / deactivates the
camera when it is called (the current
model is not installed).
Answering Machine: Activates / •
deactivate the answering machine.
To record messages in the intercom,
an SD card must be installed.
Auto Answer: Activates / deactivates•
the automatic reception of an incoming
call in 10 seconds.
Volume: Adjusts the volume of the•
speaker.
Network settings
• DHCP: Enable / disable mode to get
network settings automatically.
IP: Internal monitor IP address.•
By default, internal monitor can have a static
IP address 192.168.1.90 or 192.168.1.91.
• Mask: Subnet mask.
Gateway: The main gateway.•
DNS: DNS server address.•
Version
This menu displays the current firmware
version, the IP address and the MAC
address of the device.