basIP AA-12FB User manual

USER MANUAL
ENTRANCE PANEL
AA-12FB

AA-12FB Full User Manual
Device description
wiki.bas-ip.com
ENTRANCE PANEL
Main features
• Panel type: Multi-apartment.
• Display: 4.3’’ TFT, color with backlight.
• Keypad: Backlight piezo buttons.
• Camera: 1/4”.
• Resolution: 2 Мp.
• Сamera angle: 110° (horizontal).
• Output video: Full HD (1920 × 1080), H.264 Main Profile.
• Night backlight: 6 LEDs.
• Light sensitivity: 0,01 LuX.
• Protection class: IP65.
• IK-Code: IK07.
• Working temperature: -40 — +65 °С.
• Power consumption: 6,5 W, in standby — 3,6 W.
• Power supply: +12 V DC.
• Body: Aluminum.
• Colors: Silver, Gold, Black.
• Dimensions for installation: 142 × 358 × 58 mm.
• Size of the panel: 161 × 382 × 49 mm.
• Installation: Flush, surface with BR-AA12 bracket.
Appearance
Modern design and well-thought out functionality of this panel makes it an
ideal solution for business and elite buildings. AA-12FB is available in gold,
silver, and black, and also it supports BAS-IP UKEY mobile access.
There is a separate button to call concierge or emergency services.
4.3’’ Display.
Keypad.
Reader.
Backlight.
Camera.
Loudspeaker.
1
2
3
4
5
6
-
-
-
-
-
-
1
2
3
4
123
4 5 6
7 8 9
0
x
i
5
6

Completeness check of the product
Before installation of the outdoor panel, it is necessary to check that
it is complete and all components are available.
Outdoor panel kit includes:
Outdoor panel
Manual
Flush mount bracket
Set of wires with connectors for connection of power supply,
lock, and additional modules
A set of cups
Set of screws with a wrench
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
After verifying the device's completeness, you can switch to the outdoor panel
connection.
For connection you will need:
Electrical connection
An Ethernet UTP CAT5 or higher cable connected to a PoE network switch
or regular switch/router.
Cable length recommendations
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters,
according to the IEEE 802.3 standard.
Power supply at +12 V, 2 amps.
Connection scheme of electromagnetic lock using
uninterruptible power supply UPS-DP/S
123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
Electromagnetic Lock
SH-45
Door Sensor
SH-42
(optional)
Exit Button
GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
EAN: 5060514912829 (BLACK)
EAN: 5060514912843 (GOLD)
EAN: 5060514912836 (SILVER)

123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
SH-45 Door Sensor
SH-42
(optional)
Exit Button GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
SH-45 Door Sensor
SH-42
(optional)
Exit Button GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
SH-45 Door Sensor
SH-42
(optional)
Exit Button GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
Connection scheme of electromagnetic lock using
third-party power supply for the lock
Connection scheme of electromechanical lock using
uninterruptible power supply UPS-DP/S
Connection scheme of electromechanical lock using
third party power supply for the lock
+12V
DC
Electromagnetic Lock -+
Electromechanical lock
Electromechanical lock
+12V
DC
-+

Mechanical mounting
Do not intentionally close it. Also it is necessary to make a drain for water
at the bottom of the niche which will serve to divert water out.
It is also necessary to provide supply of a power cable, additional modules
and the local network.
Before installation of the outdoor panel it is necessary to provide a hole
or a recess into a wall with dimensions 144×360x59 mm (for flush mount)
dimensions of the bracket (mounting box) = 142×358×58 mm.
Attention: the hole at the bottom is designed to drain the water.
142 mm
358 mm
239 mm
EAN: 5060514912829 (BLACK)
EAN: 5060514912843 (GOLD)
EAN: 5060514912836 (SILVER)
Outdoor Panel Flush Bracket
Niche Screws Outdoor Panel
144 mm
360 mm
109-130 cm
161 mm
382 mm
49 mm
123
4 5 6
7 8 9
0
x
i
123
456
789
0
x
i

Warranty
The warranty card number
Model name
Serial number
Seller name
With following stated terms of warranty is familiar, functional test was
performed in my presence:
Customer signature
Warranty conditions
The warranty period of the product — 36 (thirty-six) months from
the date of sale.
Transportation of product must be in its original packaging or supplied one
by the seller.
The product is accepted in warranty repair only with a properly filled warranty
card and the presence of intact stickers or labels.
The product is accepted for examination in accordance with the cases
provided by law, only in the original packaging, in a full complete set,
appearance corresponding to the new equipment and presence of all relevant
properly filled documents.
This warranty is in addition to the constitutional and other consumer rights
and in no way restrict them.
Terms of warranty
The warranty card must indicate the name of the model, serial number,
purchase date, name of the seller, seller company stamp and
the customer’s signature.
Delivery to the warranty repair is carried out by the buyer himself.
Warranty repairs carried out only during the warranty period specified
in the warranty card.
The service center is committed to do everything possible to carry out
the repair warranty products, up to 24 working days. The period spent
on the restoration of product functionality is added to the warranty period.

Notes
EAN: 5060514912829 (BLACK)
EAN: 5060514912843 (GOLD)
EAN: 5060514912836 (SILVER)

www.bas-ip.com