bathstore NOIR 20004010880 Instruction sheet

NOIR
300 round shower head matt black
20004010880
For any assistance or further information,
go online at bathstore.com
INSTALLATION GUIDELINES
1. Installation should be carried out by a competent engineer, in
accordance with water regulations.
2. Before installation, ensure supply pipes are flushed clean.
Debris or loose particles will affect the efficiency of the shower
head. Failure to flush through pipe work before installation of
taps may cause serious damage to the shower head for which
bathstore will not be liable.
3. Shower heads in hard water areas. To prolong the lifespan and
reduce servicing periods we recommend that a suitable water
softener be fitted.
CARE AND MAINTENANCE:
To maintain the appearance of this product, ensure that it is regularly cleaned only
using a clean, soft damp cloth. A solution of warm water and a mild detergent may
be used where necessary, and then the fitting rinsed thoroughly and wiped dry. Any
other cleaning action will invalidate your warranty.
DIMENSIONS:
Diameter 300mm
FLOW RATE & OPERATING CONDITIONS
Recommended water pressure 1 –4 bar
Optimum water pressure 3 bar
1 bar
15 L/Min
2 bar
20 L/Min
3 bar
22 L/Min
4 bar
25 L/Min
Date last modified: 30/01/2018
Abrasive cleaners, scouring cleaners and acidic cleaners must not be used under
any circumstances. Avoid contact with all solvents (including chlorinated solvents,
ketones or acetones as these may result in surface deterioration or etching). Also
avoid contact with any harsh household chemicals such as oven cleaners, drain
cleaners, rust removers, paint strippers and toilet bowl cleaners, bar keepers friend,
brasso or similar products.
DIMENSION & LINE DRAWING
1

For any assistance or further information,
go online at bathstore.com
Date last modified: 30/01/2018
1
NOIR
Wall Arm matt black
20004010870
INSTALLATION GUIDELINES
1. Installation should be carried out by a competent engineer, in
accordance with water regulations.
2. Ensure the wall is strong enough to support the shower arm.
3. Mark the wall before drilling
4. Be aware of the location of pipes and cables behind the wall
before drilling
5. Use the appropriate drill bit for the wall plug.
CARE AND MAINTENANCE:
To maintain the appearance of this product, ensure that it is regularly cleaned only
using a clean, soft damp cloth. A solution of warm water and a mild detergent may
be used where necessary, and then the fitting rinsed thoroughly and wiped dry.
Any other cleaning action will invalidate your warranty.
Abrasive cleaners, scouring cleaners and acidic cleaners must not be used under
any circumstances. Avoid contact with all solvents (including chlorinated solvents,
ketones or acetones as these may result in surface deterioration or etching). Also
avoid contact with any harsh household chemicals such as oven cleaners, drain
cleaners, rust removers, paint strippers and toilet bowl cleaners, bar keepers
friend, brasso or similar products.
DIMENSION & LINE DRAWING
DIMENSIONS:
Length of the body 400mm