Baumatic BV12.3A User manual

BV12.3A
Freezer

USER MANUAL FOR YOUR BAUMATIC
BV12.3A freezer
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference. for
you or any person not familiar with the operation of the appliance.
DD 18/12/06
2

Contents
Environmentalnote 4
Important safety information 5 – 6
Specifications of your freezer 7
Descriptionoftheappliance 8
Using your Baumatic freezer 9
Beforeswitchingon 9
Duringfirstuse 9
Turning on the appliance and setting the thermostat 10
ControlPanel 11
The freezer compartment 11
Freezing fresh food 12
Tips on freezing 12-13
Makingicecubes 13
Freezing with Super Freeze 13
Cleaning and maintenance 14
Defrosting the freezer compartment 15-16
Installation 17
Electricalconnection 17
Positioning 18
Ventilation requirements 18
Aperture and appliance dimensions 19
Supplied installation components 19
Installing your freezer 20-22
Reversing the door of your appliance 23
Troubleshooting 24
Baumatic Ltd. Conditions of guarantee 25
Contactdetails 26
3

Environmental note
Note: Before discarding an old appliance, switch off and
disconnect it from the power supply. Cut off and render any plug
useless. Cut the cable off directly behind the appliance to prevent
misuse. This should be undertaken by a competent person. Disable
the door lock to make sure that children cannot get stuck inside
the appliance.
4

Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If
you are unsure of any of the information contained in
this booklet, please contact the Baumatic Technical
Department.
IMPORTANT: Any installation work must be
carried out by a qualified electrician or
competent person.
Use of the appliance
oYour appliance is only designed to be used in the
home. It is suitable for freezing and storing frozen
food. If it is used for any other purpose or it is not
used correctly, then Baumatic Ltd. Will accept no
liability for any damage that may be caused.
oAltering the specification of the appliance must not be attempted
for reasons of safety.
Before using your appliance
oCheck the appliance for any signs of transport damage. If you
notice any damage, then you should not connect your appliance
to your mains supply and should contact your retailer.
Refrigerant
oYour appliance contains R600a refrigerant, which is a natural gas
that does not contain CFCs that can damage the environment.
However it is a flammable substance, therefore care should be
taken:
During the transportation and installation of the
appliance, make sure that the refrigeration pipework
does not get damaged.
If it does become damaged then sources of ignition
and open flames should be avoided. Also the room
that the appliance is situated in should be thoroughly
ventilated.
5
oDo not place any objects on top of the appliance,
as this may damage the table top.

Child safety
oPackaging material should be kept away from
children.
oChildren should not be allowed to touch the
controls or play with the appliance.
General safety
oDo not pull on the power supply cable to remove the plug from
your mains supply socket.
oDo not pull out or insert the plug with wet hands.
6
oDo not attempt to use your appliance outdoors or
any place where it is likely to come into contact
with the elements.
oBefore cleaning the appliance or performing
maintenance work, ensure that the appliance has been
disconnected from your mains supply.
oNever allow the back coils of the appliance to come into contact
with the wall surface.
oAlways ensure that the location where you are installing your
appliance is free of stored items such as papers and other
flammable materials.
oNever block the ventilation openings of the appliance, either on
the inside or its exterior.
oIt is vital to keep your appliance well ventilated,
so that there is proper air flow between the
bottom of the unit and the plinth/kick plate
which it is sitting on.
oDo not place electrical devices inside of the appliance, such as
mixers and electric ice cream makers.
Service
You should not attempt to repair the appliance
yourself, as this could cause injury or a more serious
malfunction. If you require a service call then please
contact the Baumatic Service Department.

7
Specifications of your freezer
Congratulations on purchasing a Baumatic freezer.
oFast freeze switch
oFast freeze indicator light
oTemperature rise warning light
oAdjustable thermostat
o4 Freezer drawers
oReversible door
oAdjustable feet
Dimensions of appliance
Height: 875 mm
Width: 540 mm
Depth: 545 mm
Dimensions of aperture*
Height: 875 mm – 880 mm
Width: 560 mm – 570 mm
Depth: 550 mm
Energy efficiency class
Energy class: A
* Please refer to the installation instructions for more specific
information on the size of aperture that you will require.
IMPORTANT: When you install your appliance it is important to bear
in mind its climatic rating.
In order to find out the climatic rating of your appliance, you should
check the rating plate. The rating plate is located on the front left edge
of the inside of the fridge section. You will need to open the door of
your appliance to be able to find it.
The rating plate will indicate the ambient temperature range that your
appliance will function correctly within.

Description of the appliance
1. Control panel & thermostat control
2. Freezer flap
3. Freezer compartment drawer
4. Freezer compartment bottom drawer
5. Adjustable feet
6. Defrost drainage tube
oThe top freezer compartment (2) should be used for freezing
fresh food.
oThe other drawers (3) and (4) should be used to store food that
is already frozen
oThe defrost drainage tube should be used during the defrost
process. (Please refer to the “Defrosting your freezer”
section.)
8

Using your Baumatic freezer
Before switching on
oMake sure that it has been installed by a suitably qualified
person, as per the information contained in Baumatic’s
installation instructions.
oAfter delivery, wait for eight hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process, are allowed to settle.
oThe outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
oThe interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
oThere can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
oWhen you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the refrigerator
reaches a cool enough temperature.
oDuring this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
oIf the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
connecting it to your mains supply.
9

Turning on the appliance and setting the thermostat
You switch on your appliance by connecting it to your mains supply
and setting the thermostat. The thermostat is located on the control
panel, at the top of the freezer.
oThe thermostat automatically regulates the temperature inside
the freezer, depending on what number you have turned the
thermostat control knob to.
oPosition <0> means that the appliance is switched off and will
not cool.
oPosition <1> will give you a higher temperature inside the
freezer.
oPosition <5> will give you a lower temperature inside the
freezer.
oIdeally the thermostat should be set to a position between <3>
to <4>.
oThe freezer section can cool down to -18 degrees centigrade and
lower.
oIMPORTANT: The ambient temperature of the room,
the temperature of food and the amount of food that
has been placed in the freezer and how often the door is
opened, will all affect the temperature being maintained
by the appliance.
oOn the maximum setting (position <5>), your freezer will work
harder to maintain a lower temperature. There is no need to run
your appliance on this setting for prolonged periods and you
should return the thermostat knob to between <3> to <4>.
10

Control panel
oSuper freeze light- will light up when the super freeze button
has been turned on.
oPower light- will light up as soon as the appliance is connected
to your mains supply.
oTemperature rise warning light- will light up when the
appliance detects a rise in temperature that could affect the
contents of your freezer.
The freezer compartment
The freezer compartment is suitable for storing and freezing food.
oThe freezer compartment temperature must have already
reached -18 degrees centigrade (or lower) before you attempt to
store food that is already frozen or freezing fresh food.
oThe freezer compartment is only able to freeze a certain quantity
of food at one time. You should not attempt to freeze more than
16 kilograms of fresh food within a 24 hour period.
oPreferably the top drawer should be used when freezing fresh
food. Once the food is frozen, you can then transfer the food to
the lower drawers.
oWarm food should be allowed to cool down before you attempt
to freeze it. If you place warm food in the freezer compartment,
then the increased humidity will cause quicker ice formation and
increase the amount of power that the appliance uses.
oThe guidance of the food manufacturer should be followed, in
regard to the maximum storage time.
oThawed foods must not be frozen for a second time.
11

Freezing fresh food
oTo freeze the maximum quantity of fresh food
specified above, you should turn the
thermostat knob to position <5>, 24 hours
prior to attempting freezing.
oFor smaller quantities of fresh food, you
should turn the thermostat knob to position
<5>, approximately 6 hours prior to
attempting freezing.
oAlternatively you can use the Super Freeze option (see the
“Freezing with Super Freeze” section of this booklet).
oFresh food should be packed into airtight containers
or packaging. This will help to make sure that the
food doesn’t dry out or lose its flavour. It will also
ensure that flavour does not transfer from other
foods.
oThe food should be placed on the
freezer compartment’s base. Do not
allow fresh food to touch items that
are already frozen.
oAfter 24 hours you should check that
the fresh food is satisfactorily frozen.
If it is then the thermostat should be
turned down to its normal setting
(between <3> and <4>).
Tips on freezing
oFreezer bags, polythene wraps, aluminium foil (extra thick) and
special cans for frozen foods are suitable packaging for storing
frozen goods in.
oTape, rubber bands or plastic clips are
suitable for sealing bags and wrappings.
oBefore sealing a suitable bag, you should
compress the air out of it, as this will help
the food to freeze more easily.
oFlat packages freeze more easily.
12

oIf you are freezing liquid, then do not fill the
container to the brim. Liquids will expand when
being frozen.
oDo not place bottles (glass or tin)
containing liquids (especially sparkling
liquids) into the freezer as they could
cause the bottle to burst during freezing.
Making ice cubes
oFill the ice cube tray with water and place it in the freezer
compartment.
oAfter the water is completely frozen and turned to ice, you can
twist the ice cube tray (as shown in the drawing below) to
dispense the ice.
Freezing with Super Freeze
oPress the Super Freeze button and the freezer will start to run
continuously at its maximum setting.
oThe orange Super Freeze light will come on when the Super
Freeze button has been turned on.
oThere is no need to adjust the thermostat knob.
oThe freezer temperature will decrease and the appliance will get
to its lowest temperature.
oPlace the food that is to be frozen inside the freezer, preferably
in the top drawer.
oOnce the food is frozen, you should turn off the Super Freeze
setting. DO NOT TURN OFF THE SUPER FREEZE BUTTON
UNTIL THE FOOD IS FULLY FROZEN.
oThe orange Super Freeze light will go out and your appliance will
return to normal operation. You can then move the frozen food
from the top drawer, into the lower drawers.
13

Cleaning and maintenance
WARNING: PLEASE ENSURE THAT YOUR
APPLIANCE IS DISCONNECTED FROM
YOUR MAINS SUPPLY BEFORE
ATTEMPTING TO CLEAN IT.
oDo not clean the appliance by pouring water onto
it or spraying water over it.
oThe freezer compartment should be cleaned
periodically, using a solution of bicarbonate of soda
and lukewarm water.
oClean the accessories separately with soap and water.
Do not clean them in a dishwasher.
oDo not use abrasive products, detergents or soaps.
oAfter washing the appliance, wipe over the area that you have
cleaned with a damp cloth and then dry it thoroughly.
oWhen cleaning is complete, dry your hands and then reconnect
the plug to your mains supply.
14

Defrosting the freezer compartment
The frost in the freezer compartment should be removed periodically.
You can use a plastic scraper to keep down the amount of frost that
builds.
IMPORTANT: The freezer compartment should be defrosted at least
twice a year. The number of times that you need to defrost it, will
depend on the setting of your thermostat and how much food you
freeze and store in the compartment.
oThe day before you defrost, turn the thermostat dial to position
<5>, this will make sure that the food contained in the
compartment is frozen properly.
oWhilst defrosting the appliance, the food should be removed
from the compartment and wrapped in several layers of paper
and stored in a cool place. The foods rise in temperature will
shorten its storage life and therefore the food should be used
within a relatively short period of time.
oDO NOT PLACE FOOD BACK IN THE FREEZER
COMPARTMENT THAT HAS STARTED TO THAW.
oSet the thermostat knob to position <0> and disconnect the
appliance from your mains supply.
oLeave the door to the freezer compartment open. You can place
a bowl of warm water inside the freezer compartment to speed
up the defrost process.
oYour appliance is fitted with a defrost drainage tube. Therefore
you should pull out the bottom drawer (A) and place it on the
floor in front of the appliance.
15

16
oThe defrost drainage tube (B) is located on the back wall of the
freezer. It should be placed in the groove at the front of the
freezer.
oYou should check to make sure that the defrost water coming
out of the defrost drainage tube, will flow into the bottom drawer
that you have placed in front of the appliance.
oTake care to ensure that the bottom drawer does not overflow,
the defrost water may need emptying periodically.
oOnce all the ice that has built up has melted, then the inside of
the freezer compartment should be dried thoroughly. Failure to
do this will result in immediate ice build when the appliance is
turned back on.
oWith dry hands, reconnect your appliance to your mains supply.
Set the thermostat knob to position <5> for a 24 hour period,
before returning it to the normal setting of between <3> and
<4>.
oYou should not attempt to freeze fresh food inside the freezer
compartment until this 24 hour time period has elapsed.
oDo not defrost the appliance with other electrical devices
(e.g. hair dryer). Do not use sharp metal objects to
remove the ice on the freezer, as this could cause damage
to the refrigerant system.

Installation
IMPORTANT: Before installation and usage,
read all the instructions and make sure tha
voltage (V) and the frequency (Hz) indicated on
the rating plate are exactly the same as the
voltage and frequency in your home. The rating
plate can be found on the front left edge of the
17
t the
inside of the refrigerator.
The manufacturer declines all responsibility in the event of the installer
failing to observe all the accident prevention regulations in force,
which are necessary for normal use and the regular operation of the
electric system.
Electrical connection
YOUR REFRIGERATOR IS INTENDED FOR FITTED
AND PERMANENT INSTALLATION.
We recommend that the appliance is connected by a
qualified electrician, who is a member of the N.I.C.E.I.C.
and who will comply with the I.E.E. and local regulations.
oYour refrigerator comes supplied with a 13 amp plug fitted. If in
future you need to change the fuse in this plug, then a 13 amp
ASTA approved (BS 1362) fuse must be used.
oThe wiring in the mains lead is coloured as follows:
Brown Live
Blue Neutral
Green and yellow Earth
oAs the colours of the wires in the appliance’s mains lead may not
correspond with the coloured markings identifying the terminals
in your spur box, please proceed as follows:
The brown wire must be connected to the terminal marked “L”
(live), or coloured red.
The blue wire must be connected to the terminal marked “N”
(neutral), or coloured black.
The green and yellow wire must be connected to the terminal
marked “E” (earth), or by the earth symbol, or coloured green
and yellow.
oWhen the connection is completed, no stray strands or cut wire
should be present. The cord clamp must be secured over the
outer sheath.

Positioning
oIt is advisable that your appliance is only installed in a location
where the ambient temperature of the room, corresponds with
the climate classification that is stated on the rating plate of your
appliance. Your appliance may not function correctly if the
ambient temperature falls outside of the following ranges.
Climate classification Appropriate ambient temperature
SN +10 to +32 degrees centigrade
N +16 to +32 degrees centigrade
oYour appliance should not be located in direct sunlight or
exposed to continuous heat or extremes of temperature (e.g.
next to a radiator or boiler).
oThe door should be able to open completely and freely
oThe appliance should be situated so you can easily access the
food that is stored in it.
oYou should check whether there is an electrical socket available,
which will be accessible after your appliance is installed.
Ventilation requirements
1) Your appliance requires ventilation. The minimum amount of
ventilation that it requires is shown in figure 1.
18

Aperture and appliance dimensions
2) Figure 2 shows the aperture size that you will need to be able to
install your appliance.
oThe appliance must be stood on a level floor. You can use the
leveling feet to take into account any minor unevenness in
the floor.
Supplied installation components
a) Top fixing bar
b) Sealing strip
c) Door slider
d) Door guide
e) Fixing screws (Ø4 x 17)
f) Fixing screws (Ø4.2 x 9.5)
19

Installing your freezer
If you need the appliance door to open from the
other side, then please reverse the door before
commencing the installation process. (See Reversing
the door section).
4) Insert the top fixing bar
(a) into the slot on the top
of the appliance. Use the
Ø4.2 x 9.5 fixing screws (f)
to fit the fixing bar to the
top of the appliance.
oPass the power
cable through to
the back of the
aperture. This will
allow the
appliance to be
easily plugged in,
once you have
completed the rest
of the installation.
5) Cut the sealing strip so that is the
same height as the height of the
aperture.
oStick the sealing strip onto the
side of the aperture that the
appliance door will open from.
oCarefully lift the appliance and
place it into the aperture of the
kitchen unit that you are
installing it into.
oSlide the appliance over to the
far left of the aperture, unless
you have reversed the door. In
which case you should slide the
appliance over to the far right of the aperture.
20