Tommy Swiss B308 User manual

B308 / 309 Installation Guide

Bed Frame Parts List – 1 of 2
2 x Middle Beam Support Bar
Brackets (4 for King Size)
4 x Corner Rectangular Brackets
2 x Support Legs (4 for King Size)
4 x Corner Triangle Brackets
4 x Corner Black Feet

Bed Frame Parts List – 2 of 2
20 x Medium Bolts
4 x Long Bolts & Nuts for Support
Legs (8x for King Size)
4 x Bolts & Washers for Wing
Attachment
10 x Long Bolts for Side Bar, 2 x Long
Bolts for Middle Support Beam
16 x Short Bolts

Join the 2 wing pieces to the headboard

Unzip and slide 2 bolts for the wing pieces
Unzip the back of the headboard
Position 2 silver bolts with washer
from inside the headboard as shown

Align the holes on the wing with the silver bolts

Install the brackets onto the bed frame
Fix corners as shown – use shortest bolts for the
side panel, and the medium bolts for the headboard
Fix middle support bracket as
shown – use medium bolts

Install side metal bar onto the side panel
Use 5 long bolts to join side metal bar to side panel
on each side
Ensure the side panel and foot
panel are joined as shown

Install the corner black feet
Join the black plastic foot in each of the 4 corners underneath the triangle bracket as shown

Attach the middle support beam on top of the
bracket using the long bolt at each end

Insert all the wooden slats via plastic clip holders
Connect the plastic clips to the wooden slat pieces
Once all the plastic clips are attached to the wooden slats,
push down onto the bed frame beams to lock in place
Place metal support legs
underneath the middle
support beam, and fix
using the long bolts and
nuts provided