Bayliner 2855 Sunbridge User manual

Engine Serial Number:
Hull Identification Number:
Hull Identification Number
The Hull Identification Number (HIN) is located on the starboard side of the transom. Be sure to record the HIN (and
the engine serial numbers) in the space provided above. Please refer to the HIN for any correspondence or orders.
© 1999 Bayliner Technical Publications. All rights reserved.
No part of this publication may be reproduced, stored in any retrieval system, or transmitted in any form by any means,
electronic, mechanical, photocopying, recording or otherwise, without prior written permission of Bayliner.
Printed in the United States of America.
General Notes
The material in this document is for information only and is subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its accuracy, Bayliner assumes no liability resulting from errors or
omissions in this document, or from the use of information contained herein.
Due to our commitment to product improvement, Bayliner reserves the right to make changes in the product design,
specifications, and equipment at any time without notice or obligation. Illustrations and/or photos may show optional equipment.
All Bayliner products meet or exceed USCG (Unites States Coast Guard) and/or NMMA (National Marine Manufacturer’s
Association) construction standards. Manufactured with 1,1,1 Trichloroethane, a substance which harms public health and
environment during the manufacturing process by destroying ozone in the upper atmosphere.
Proprietary Rights
This document discloses subject matter in which Bayliner has proprietary rights. The information and design disclosed herein
were originated by and are the property of Bayliner. Neither receipt nor possession thereof confers or transfers any right to
reproduce, copy, alter or disclose the document or any part thereof, any information contained therein, or to construct boats or
any item from it, except by written permission from or written agreement with Bayliner. This document is to be returned upon
request to Bayliner.
HIN LOCATION

Congratulations and welcome aboard your new Bayliner Ciera!
Thank you for choosing our product. Bayliner is committed to the goal of building the
highest quality products in the marine industry and to providing the finest after-the-
sale support in the world.
To keep our respected status as the number one boat builder in the world, Bayliner has
instituted an ongoing Total Customer Satisfaction Program.
The guiding principles of this program are:
•Design, build and support the finest marine products in the world, in every market
we serve.
•Be personally and individually responsible for the customer’s total satisfaction.
•Remember that every customer has a choice, and we want them to choose Bayliner!
Welcome to the Bayliner family. We are looking forward to serving your boating
needs, now and in the future!

CONTENTS
CHAPTER 1: WELCOME ABOARD!
1 Dealer Service
1 Boating Experience
1 Engine/Accessories Guidelines
2 Qualified Maintenance
2 Special Care For Moored Boats
2 Safety Standards
3 Hazard Boxes & Symbols
CHAPTER 2: FEATURES/SYSTEMS
4 Dimensions and Tank Capacities
4 Layout View
4 Hull Exterior Hardware & Drains
5 Deck Hardware and Accessories
7 Cockpit Hardware and Accessories
7 Lifting Sling Locations
8 Windshield Wiper
8 Electrical System
9 12 Volt DC System
9 Fuses and Circuit Breakers
9 Batteries
9 Battery Switch
10 Battery Charger
12 Navigation & Communication Equipment
12 VHF Radio (LX models only)
12 Compass (LX models only)
12 Depth Finder (LX models only)
12 Audio Equipment
13 Lighting
13 Navigation and Interior Lights
13 Appliances
14 Propulsion
14 Engine
14 Fuel System
14 Fuel Fill and Vent:
14 Fuel Filters:
14 Anti-siphon Valve:
15 Bilge Blower
15 Trim Tabs
16 Bilge Pumps
16 Autofloat Switches
17 Freshwater System (LX models only)
17 Water Heater
18 Transom Shower
18 Sink & Shower Drain Systems
18 Sump Box Cleaning
18 Sump System Winterization
19 Raw Water System
19 Seacocks
19 Raw Water Strainers
20 Marine Head with Holding Tank
21 Air Conditioning System (Option Available
on LX Models Only)
22 Canvas Top Installation
CHAPTER 3: ELECTRICAL ROUTINGS
23 Hull Wire Harness Routings
24 Deck Wire Harness Routings
25 Battery Cable Routings
CHAPTER 4: WIRING SCHEMATICS
26 Single Dockside
27 Dual Dockside
28 Gas Engine Electrical System
29 Diesel Engine Electrical System
LIMITED WARRANTY
30 What Is Not Covered
30 Other Limitations
30 Your Obligation

Chapter 1: Welcome Aboard! 1
Ciera 2855 Cruiser •Owner’s Manual Supplement
Chapter 1: Welcome Aboard!
This owner’s manual supplement provides specific information about your boat that is not covered in the owner’s
manual. Please study the owner’s manual and this supplement carefully, paying particular attention to the Limited
Warranty. Keep the owner’s manual and this supplement on your boat in a secure, yet readily available place.
Dealer Service
Make sure you receive a full explanation of all systems from the selling dealer before taking delivery of your boat.
Your selling dealer is your key to service. If you experience any problems with your new boat, immediately contact
the selling dealer. If for any reason your selling dealer is unable to help, you can call us direct on our customer ser-
vice hotline: [phone] or send us a FAX: [phone].
Boating Experience
If this is your first boat or if you are changing to a type of boat you are not familiar with, for your own comfort and
safety, please ensure that you obtain handling and operating experience before assuming command of the boat.
We strongly recommend that you take one of the boating safety classes offered by the U.S. Power Squadrons or the
U.S. Coast Guard Auxiliary. For more course information, including dates and locations of upcoming classes, contact
the organizations directly:
•U.S. Power Squadrons: 1-888-FOR-USPS (1-888-367-8777) or on the Internet at: http://www.usps.org
•U.S. Coast Guard Auxiliary: 1-800-368-5647 or on the Internet at: http://www.cgaux.org
Outside the United States, your selling dealer, national sailing federation or local boat club can advise you of local
sea schools or competent instructors.
Engine/Accessories Guidelines
Your boat’s engine and accessories were selected to provide optimum performance and service. Installing a different
engine or other accessories may cause unwanted handling characteristics. Should you choose to install a different
engine or to add accessories that will affect the boat’s running trim, have an experienced marine technician perform a
safety inspection and handling test before operating your boat again.
Please be advised that certain modifications to your boat can result in cancellation of your warranty
protection. Always check with your dealer before making any modifications to your boat.
The engine and accessories installed on your boat come with their own operation and maintenance manuals. We
strongly urge you to read and understand these manuals before operating the engine and accessories.
Qualified Maintenance
Failure to maintain your boat’s systems as designed could violate the laws in your jurisdiction and could expose you
CONTROL HAZARD! A qualified operator must be in control of the boat at all times. DO NOT
operate your boat while under the influence of alcohol or drugs.
WARNING!
!
NOTICE
When storing your boat please refer to your engine’s operation and maintenance manuals.

2 Chapter 1: Welcome Aboard!
Ciera 2855 Cruiser •Owner’s Manual Supplement
and other people to the danger of bodily injury or accidental death. We recommend that you follow the instructions
provided in the owner’s manual this owner's manual supplement, the engine owner’s manual and all accessory
instruction sheets/manuals included in your boat’s owner’s packet.
Special Care For Moored Boats
If moored in saltwater or fresh water, your boat will collect marine growth on its hull bottom. This will detract from
the boat’s beauty, greatly affect its performance and may damage the gelcoat. There are two methods of slowing
marine growth:
•Periodically haul the boat out of the water and scrub the hull bottom with a bristle brush and a solution of soap and
water.
Safety Standards
Your boat’s mechanical and electrical systems were designed to meet safety standards in effect at the time it was
built. Some of these standards were mandated by law, all of them were designed to insure your safety, and the safety
of other people, vessels and property.
In addition to this owner’s manual supplement, please read the owner’s manual and all accessory instruction
sheets for important safety standards and hazard information.
To maintain the integrity and safety of your boat, only qualified personnel should perform
maintenance on, or in any way modify: The steering system, propulsion system, engine control
system, fuel system, environmental control system, electrical system or navigational system.
WARNING!
!
NOTICE
• To help seal the hull bottom and reduce the possibility of gelcoat blistering on moored boats,
we recommend the application ofan epoxy barrier coating, such as INTERLUX, Interprotect
2000E/2001E. The barrier coating should be covered with several coats of anti-fouling paint.
• Many states regulate the chemical content of bottom paints in order to meet environmental
standards. Check with your local dealer about recommended bottom paints, and about the
laws in effect in your area.
DANGER
PERSONAL SAFETYHAZARD! Do not allow anyone to ride on parts of the boat
not designated for such use. Sitting on seat backs, lounging on the forward deck,
bow riding, gunwale riding or occupying the transom platform while underway is
especially hazardous and will cause personal injury or death.
DANGER!
!

Chapter 1: Welcome Aboard! 3
Ciera 2855 Cruiser •Owner’s Manual Supplement
Hazard Boxes & Symbols
The hazard boxes and symbols shown below are used throughout this supplement to call attention to potentially
dangerous situations which could lead to either personal injury or product damage. We urge you to read these
warnings carefully and follow all safety recommendations.
DANGER!
!
This box alerts you to immediate hazards which WILL cause severe personal injury or death if
the warning is ignored.
This box alerts you to hazards or unsafe practices which COULD result in severe personal
injury or death if the warning is ignored.
WARNING!
!
This box alerts you to hazards or unsafe practices which COULD result in minor personal
injury or cause product or property damage if the warning is ignored.
CAUTION!
!
NOTICE
This box calls attention to installation, operation or maintenance information, which is impor-
tant to proper operation but is not hazard related.
EXPLOSION
HAZARD! OPEN FLAME HAZARD! HOT HAZARD! ROTATING PROPELLER HAZARD!
PERSONAL INJURY
& FALLING HAZARD!
ELECTRICAL
HAZARD!

4 Chapter 2: Features/Systems
Ciera 2855 Cruiser •Owner’s Manual Supplement
Chapter 2: Features/Systems
Dimensions and Tank Capacities
Layout View
Hull Exterior Hardware & Drains
Overall
Length Bridge Clearance Beam Draft
(Drive Up) Fuel Capacity
(gal) Freshwater Capacity (gal) Waste Holding Tank Capacity (gal)
28’6” 9’ 1” 9’10” 1’8” 102 33 20
engine
hatch head
transom
gate
transom
gate
aft berth
below
aft berth
below
stepssteps
sinksink
hanging
locker
hanging
locker stowage
stowage
stowage
rope
locker
rope
locker
stepssteps
stepstep
stepstep
retractable
transom
seat
retractable
transom
seat stowage
stowage
under
stowage
under
stowage
stowage
under
stowage
under
seat
seat
refer
under
refer
under
berth w/
berth w/
stowage
stowage
under
berth w/
stowage
under
galley
dinette
sunlounge
sunlounge
Flip up
Bolster
Bolster
Helmseat
Helmseat
Flip up
Bolster
Helmseat
COCKPIT
ROPE
FUEL & HOLDING
TANK VENTS
COCKPIT
DRAINS AFT BILGE
PUMP DRAIN
BOW
EYE
STORAGE
DRAIN
AIR COND.
OVERBOARD
FWD. BILGE
PUMP DRAIN SHOWER SUMP DRAIN
HEAD SINK
DRAIN
WATER TANK
VENT
LOCKER
DRAIN
GALLEY
DRAIN DRAINS
STERN EYE GARBOARD DRAIN MACERATOR OVERBOARD
TRANSOM
VIEW
AIR COND.
DRAIN
TRIM TAB (TYPICAL) DISCHARGE (OPTION)

Chapter 2: Features/Systems 5
Ciera 2855 Cruiser •Owner’s Manual Supplement
Deck Hardware and Accessories
ANCHOR
LIGHT
LIGHT
POLE
STORAGE
SPEAKER
ACCESS TO
COURTESY
LIGHT
INSTALLATION
AREA
ANTENNA
MOUNT
RADAR WING HARDWARE AND ACCESSORIES
TRANSOM
FUEL FILL
FITTING
WASTE PUMP
OUT FITTING
BOARDING
LADDER
GRAB
HANDLES
AFT DECK
STORAGE AREA
DECK
CLEAT
SWIM
STEP
(TYPICAL)
DECK CLEAT
(TYPICAL) WINDSHIELD
WIPER BOW
RAIL
DECK
HATCHES BOW
HATCH
FOREDECK HARDWARE AND ACCESSORIES
AFT DECK HARDWARE
FWD.
BOW
CLEAT
ROPE
CHOCK
NAVIGATIONAL
LIGHTS (TYPICAL)
WINCH
SWITCH
ANCHOR
WINDLASS
ANCHOR
ROLLER
FWD.

6 Chapter 2: Features/Systems
Ciera 2855 Cruiser •Owner’s Manual Supplement
Helm Layout
12 VOLT
ADAPTER TRIM TABS SWITCHES
(TYPICAL)
VHF RADIO
ACCESSORY
FUSE PANEL STEERING
WHEEL
SHIFTER LOCATED
ON OUTBOARD
SIDE OF HELM
VIEW OF HELM LOOKING FORWARD
(LX ONLY)
ACCESSORY SWITCHES
(LX ONLY)
FWD.
TEMP.
GAUGE FUEL
GAUGE
TACHOMETER OIL
GAUGE SPEEDOMETERVOLTMETER
DEPTH
SOUNDER
HELM INSTRUMENT PANEL

Chapter 2: Features/Systems 7
Ciera 2855 Cruiser •Owner’s Manual Supplement
Cockpit Hardware and Accessories
Lifting Sling Locations
Use the following lifting sling locations when raising your boat in or out of the water.
ACCESS TO FUEL
FILL AND WASTE
PUMP OUT HOSES
COURTESY
LIGHT
COCKPIT
STORAGE
TRANSOM
DOOR
REMOVABLE
TABLE
ENGINE
HATCH
AFT DECK
SEAT
REMOVABLE
LOUNGE
FILLER
PORT
LOUNGE
SEAT
VIEW OF PORT COCKPIT LOOKING FORWARD
ENTRY
DOOR
VIEW OF AFT DECK
VIEW OF AFT STARBOARD COCKPIT
AFT
FWD
STBD.
AFT
STBD.
ENGINE
HATCH
CABIN
CAUTION!
PRODUCT OR PROPERTY DAMAGE HAZARD!
When lifting any boat always use a spreader bar. The spreader bar must be equal to the width
of the boat at the lifting point. Always secure the slings to one another to prevent the forward
sling from sliding up along the forefoot of the boat.
!
BAYLINER
44"
167"
Lifting sling positions shown on this drawing
are typical for port and starboard sides.
FOREFOOT
(TYPICAL, TWO LABELS PER SIDE)

8 Chapter 2: Features/Systems
Ciera 2855 Cruiser •Owner’s Manual Supplement
Windshield Wiper
•The windshield wiper control switch is located at the helm.
•Periodically, the wiper blade will need to be replaced using 18”blade refills.
To improve visibility; keep your windshield clean and regularly apply a good quality anti-rain solution to the exterior
panes and an anti-fog solution to the interior panes.
Electrical System
We strongly recommend that you read and understand this section and the electrical section of the owner’s manual.
Electrical routing drawings are provided in Chapter 3 of this supplement; wiring schematics in Chapter 4.
EXTREME FIRE, SHOCK & EXPLOSION HAZARD!
• To minimize the risks of fire and explosion, NEVER install knife switches or other arcing
devices in the fuel compartments.
• NEVER substitute automotive parts for marine parts. Electrical, ignition and fuel system
parts were designed and manufactured to comply with rules and regulations that minimize
risks of fire and explosion.
• DO NOT modify the electrical systems or relevant drawings.
• Only qualified personnel should install batteries and/or perform electrical system
maintenance.
• Insure that all battery switches are turned OFF before performing any work in the engine
spaces.
DANGER!
!
FIRE, OPEN FLAME & EXPLOSION HAZARD!
• Fuel fumes are heavier than air and will collect in the bilge areas where they can be acci-
dently ignited. Visually and by smell (sniff test), check the engine and fuel compartments for
fumes or accumulation of fuel. ALWAYS operate the bilge blowers for at least four minutes
prior to engine starting, electrical system maintenance or activation of electrical devices.
• Minimize the danger of fire and explosion by not exposing batteries to open flame or sparks.
It is also important that no one smoke anywhere near the batteries.
WARNING!
!
SHOCK & ELECTRICAL SYSTEM DAMAGE HAZARD! NEVER disconnect the
battery cables while the engine is running since it can cause damage to your boat’s
electrical system components.
CAUTION!
!
Electrical connections are prone to corrosion. To reduce corrosion caused electrical problems,
keep all electrical connections clean and apply a spray-on protectant that is designed to protect
connections from corrosion.
NOTICE

Chapter 2: Features/Systems 9
Ciera 2855 Cruiser •Owner’s Manual Supplement
12 Volt DC System
Fuses and Circuit Breakers
The engine is protected by a large cir-
cuit breaker located on the engine.
The accessories are protected by cir-
cuit breakers on the battery switch
panel and by the accessory circuit
breakers located below the steering
wheel. Wires are color-coded to indi-
cate which accessory each fuse ser-
vices. Some items, such as radios and
bilge pumps, may be fused individu-
ally at the unit. Autofloat switches are
fused at the battery.
Batteries
The batteries supply electricity for
lights, accessories and engine starting.
The Electrical section of Chapter 8, in
theOwner’sManual,providesbattery,
care and maintenance instructions.
Battery Switch
The battery switch (located in the aft
deck storage area) has four (4) posi-
tions (see photograph on right);
•Position "1" - Provides power for
engine starting and accessories,
from battery "1". Battery "1" (only)
will be charged by the engine alter-
nator when the engine is running at high idle or faster.
•Position "2" - Provides power for engine starting and accessories, from battery "2". Battery "2" (only) will be
charged by the engine alternator when the engine is running at high idle or faster.
•Position "BOTH" - If batteries are low; provides power for engine starting from both batteries. The "BOTH" posi-
tion also allows the charging of both batteries by the engine alternator when the engine is running at high idle or
faster.
•The battery switch should be switched to the "OFF"position whenever the boat is left unoccupied for long periods
of time. Table 1: Battery Switch Positions
Battery Switch
Position Engine Starting Accessories and Lights Engine Alternator Battery Charger
POSITION
"1" Battery "1"
Provides Starting
Power
Provides Power
From Battery "1" Charges Battery "1" Charges "BOTH"
Batteries
POSITION
"2" Battery "2"
Provides Starting
Power
Provides Power
From Battery "2" Charges Battery "2" Charges "BOTH"
Batteries
"BOTH"
POSITION Both Batteries
Provide Starting
Power
Both Batteries Provide
Accessory Power (not advised
unless engine is running)
Charges
"BOTH"
Batteries
Batteries will NOT
Charge Properly
BATTERY SWITCH
IS LOCATED IN THE
AFT DECK STORAGE
AREA ON THE PORT
SIDE
POSITION "1"
"OFF"
BATTERY "1"
ACTIVATES
POSITION
POSITION "BOTH"
BATTERIES
ACTIVATES BOTH
POSITION "2"
BATTERY "2"
ACTIVATES
AFT DECK
ACCESSORY CIRCUIT
BREAKER PANEL
VOLTMETER
BATTERY
LOCATIONS
ENGINE
COMPARTMENT
PORT
AFT
STORAGE
TRANSOM

10 Chapter 2: Features/Systems
Ciera 2855 Cruiser •Owner’s Manual Supplement
Battery Charger
Your boat is equipped with a battery charger. We recommend that you thoroughly read and understand the battery
charger manual before using the charger.
•The battery charger will charge the boat’s batteries whenever the boat is plugged into 120 volt shore power.
•For proper charging; turn the battery switch to any position except "BOTH".
Shore Power/110 Volt AC System
The battery charging systems (alternators and battery charger) are designed to charge conven-
tional lead-acid batteries. Before installing gel-cell (or other new technology) batteries, consult
with the battery manufacturer about charging systems requirements.
CAUTION!
!
TYPICAL AC POWER PANEL
CAUTION
!
WATER HEATER DAMAGE HAZARD! - Do not energize the water heater elec-
trical circuit until the heater is COMPLETELY filled with water. The tank is full
if water flows from the tap when the hot water is turned on in the galley. Even
momentary operation in a dry tank will damage the heating elements. Warranty
replacements WILL NOT be made on elements or tank damaged in this manner.
SHORE POWER
INLETS
AIR COND.
(OPTION ONLY)
AFT
SHORE POWER INLETS
TYPICAL
SHORE POWER
RECEPTACLE
PORT SIDE
OF DECK
FIRE, EXPLOSION & SHOCK HAZARD!
• DO NOT alter shore power connectors and use only compatible connectors.
• Before connecting or disconnecting the shore power cord to your boat, verify all breakers
and switches on the AC master panel are turned OFF.
• To prevent shock or injury from an accidental dropping of the “hot”cord into the water,
ALWAYS attach theshore power cordto the boat inlet first; then to the dockside connection.
When disconnecting from shore power, disconnect the shore power cord from the dockside
connection first.
• NEVER leave a shore power cord connected to the dockside connection only.
• Only use shore power cords approved for marine use. NEVER use ordinary indoor or out-
door extension cords that are not rated for marine use.
DANGER!
!

Chapter 2: Features/Systems 11
Ciera 2855 Cruiser •Owner’s Manual Supplement
Connecting to Shore Power
1. Monitor the AC panel’s polarity indicator lights (next to the line 1 and line 2 master breakers) as follows:
• A GREEN light illuminating after the power cord is plugged into the boats external power receptacle indi-
cates acceptable electrical power in which you may energize the main breaker switches.
2. A RED light, however, indicates reversed polarity, which could cause electrical system damage and possibly
electrical shock injuries. In this case, DO NOT energize the main breaker switches (see warning below).
3. Activate the AC system by turning the main ship/shore breaker to the “DOCKSIDE”position.
4. Turn ON the master breakers and individual component breakers as required.
FIRE, SHOCK & ELECTRICAL SYSTEM DAMAGE HAZARD!
• NEVER connect dockside power to your boat outside North America unless you have pur-
chased the international electrical conversion option.
• The simultaneous use of several AC components can result in an overloaded circuit. It may
be necessary to turn off one or more accessories in order to use another accessory.
• Use double insulated or three-wire protected electrical appliances whenever possible.
• Periodically check the shore power cord(s) for deterioration or damage. Damaged or faulty
cords should NEVER be used since the danger of fire and electrical shock exists.
• DO NOT pinch shore power cords in doors or hatches, or coil the shore power cord too
tightly since these situations can generate enough heat to result in a fire.
• If a shore power cord should accidently become immersed in water, THOROUGHLY dry
the blades and contact slots before reusing.
CAUTION!
!
NOTICE
Some dockside installations may be rated less than 30 amps, therefore, you may need to pur-
chase lower amp adapters. Whenever a lower amp adapter is used, however, there will be a
corresponding drop in supplied power from the dockside system.
SHOCK & ELECTRICAL SYSTEM DAMAGE HAZARD!
• Monitor the polarity indicator lights EVERY TIME you connect to shore power.
• When connecting to shore power and you encounter a reversed polarity light (RED col-
ored), DO NOT energize the main breaker switches. Instead, IMMEDIATELY disconnect
the shore power cord (ALWAYS from the dockside receptacle first) and notify marina
management.
WARNING!
!
The voltage on each line can be read by setting the voltmeter selector switch.
NOTICE

12 Chapter 2: Features/Systems
Ciera 2855 Cruiser •Owner’s Manual Supplement
Navigation & Communication Equipment
The owner’s packet contains operation manuals for all navigation
& communication equipment installed on your boat. We strongly
recommend that you thoroughly read and understand these manu-
als before using these systems. Additionally, read the warnings
below carefully and follow all safety recommendations.
VHF Radio (LX models only)
Your boat may include an optional VHF (Very High Frequency)
radio at the helm. The VHF radio can be used to access weather
reports, summon assistance or contact other vessels as permitted
by the FCC (Federal Communications Commission). Be sure to
contact the FCC for licensing, rules and regulations concerning
VHF radio usage.
Compass (LX models only)
Depth Finder (LX models only)
Audio Equipment
The audio equipment installed on your boat has separate manuals (included in your boat’s owner’s packet) that
explains its operating procedures in detail.
VHF RADIO (LX ONLY)
Compass accuracy can be affected by many factors. We strongly recommend having a quali-
fied technician calibrate your compass. Make sure the technician gives you a deviation card
which shows the corrections to apply in navigational calculations. Keep a copy of the deviation
card at the helm.
NOTICE
• DO NOT use the depth finder as a navigational aid to prevent collision, grounding, boat
damage or personal injury.
• When the boat is moving, submerged objects will not be seen until they are already under the
boat. Bottom depths may change too quickly to allow time for the boat operator to react. If
you suspect shallow water or submerged objects, operate the boat at very slow speeds.
WARNING!
!
NOTICE
AM radio reception may be impaired in areas where reception is limited or anytime the engine
is running.

Chapter 2: Features/Systems 13
Ciera 2855 Cruiser •Owner’s Manual Supplement
Lighting
Navigation and Interior Lights
We strongly recommend that you understand navigation light section of the owner’s manual.The navigation and inte-
rior lights installed on your boat are of top quality, but you should be aware that failure may periodically occur for a
variety of reasons:
1. There may be a blown fuse - replace the fuse.
2. The bulb may be burned out - carry spare bulbs for replacement.
3. A wire may be damaged or may have come loose - repair as required.
4. The bulb base may be corroded - clean the base and coat it with non-conductive electrical lubricant.
Appliances
All appliances installed on your boat come with their own manuals that contain detailed operating instructions and
important safeguards. Thoroughly read and understand these manuals before operating your boat’s appliances.
•Make sure the AC breaker is activated for the appliance you wish to turn on.
• Avoid the storage of gear where it would block navigation lights from view.
• Be conservative in the use of battery power. Prolonged operation of cabin interior lights
(overnight) will result in a drained battery.
CAUTION!
!
NOTICE
Always keep an approved ABC-type fire extinguisher in galley area.
HOT & FIRE HAZARD!
STOVE: DO NOT touch stove burners, grates or areas near the stove units as they may be hot
even when they are dark in color. Areas near burners and grates may become hot enough to
cause burns. During use and afterwards, DO NOT touch or let clothing or other flammable
material come in contact with heated units (or areas near the units) until they have had suffi-
cient time to cool.
WARNING!
!

14 Chapter 2: Features/Systems
Ciera 2855 Cruiser •Owner’s Manual Supplement
Propulsion
Engine
The owner’s packet contains detailed engine operation and maintenance manuals. Be sure to read and understand
these manuals before operating or performing maintenance to the engine.
Fuel System
Fuel Fill and Vent:
The fuel fill is located on the starboard
aft deck. The fuel fill fitting is marked
“GAS”. The fuel tank vent is located in
the hull below and in the same general
area as the fill. If you experience diffi-
culty filling the fuel tank, check to see
that the fuel fill and vent lines are free
of obstructions and kinks.
Fuel Filters:
All tanks are equipped with a fine mesh
screen filter on the fuel pickup tube
(located inside or on the outside of the
tank) to the fuel line fitting. In addition,
when supplied by the engine manufac-
turer, a filter is installed on the engine.
Fuel filters should be replaced periodi-
cally to ensure they remain clean and
free of debris. Consult your selling
dealer or local marina concerning fuel
additives that help to prevent fungus or
buildup in your fuel tank
Anti-siphon Valve:
Your boat is equipped with an anti-
siphon valve, which is an integral part
of the barb fitting on the fuel tank in
which the neoprene fuel line attaches. The valve is spring loaded and is opened by fuel pump vacuum. These valves
will prevent fuel from siphoning from the tank in the event of a fuel line rupture
FUEL FEED
HOSE
FUEL SYSTEM ROUTING
FUEL TANK
VENT FITTING
FUEL TANK
STBD. AFT
ENGINE
COMPARTMENT
FUEL FILL
DECK FITTING
TRANSOM
FUEL TANK
VENT FITTING
DECK FITTING
FUEL FILL
STBD.
AFT
FUEL FILL LOCATION
HULLSIDE
NOTICE
If an engine running problem is diagnosed as fuel starvation, check the anti-siphon valve. In the
event the valve is stuck or clogged, it should be changed or replaced while the engine is shut down.
Under NO circumstances should the anti-siphon valve be removed, except in an emergency.
WARNING
FIRE/EXPLOSION HAZARD - It is very important that the fuel system be
inspected thoroughly the first time it is filled and at each subsequent filling. For
your safety and the safety of your passengers, the fueling instructions in the
Owner’s Manual must be carefully followed.
!
CAUTION
Avoid the storage or handling of gear near the fuel lines, fittings and tank.
!