Bayside Furnishings CSC7PCHD-1N User manual

Date 2018-04-09 Rev. 0001-A Factory: GRWOVI
7-piece Counter-Height Round Drop-leaf
Dining Set
ITM. / ART. 2000708
Model # CSC7PCHD-1N
ASSEMBLY INSTRUCTIONS
IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-877-494-2536 (English, French and Spanish)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
(In U.S. and Canada only)
Or visit our website www.baysidefurnishings.com
For customer service outside of North America, please e-mail your request to
[e-mail]

2
1. This product is for indoor domestic use only.
2. Please read the Assembly Instructions prior to assembling this product.
3. To avoid damage, assemble the product on a non-abrasive surface such as a carpet surface.
4. Make sure all bolts and screws are tightly fastened before the unit is used.
5. Check that all bolts, screws and knobs are tight at least every 3 months or as needed
6. Refer to your assembly manual for maximum weight capacities.
7. Do not push furniture, especially on carpeted floor. Have someone help you lift the item and place it in its
new location.
1. Maximum load weight on table is 181.4 kg / 400 lb
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S
Please make sure you have all parts before beginning assembly. Do not fully tighten all bolts until you
finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly
easier. We recommend using two people for assembly.
THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM
WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM
WEIGHTS INDICATED MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.
G E N E R A L I N F O R M A T I O N A N D T I P S

3
Parts and Hardware List
PART # PART DESCRIPTION PART FIGURE QUANTITY
A Table Top 1
B Table Leg 4
C Shelf Panel 1
AA Bolt 8+1 extra
BB Lock Washer 8+1 extra
CC Flat Washer 8+1 extra
Hex-key Wrench 1
Tools required: Hex-key wrench (included).

4
Assembly Instructions
1. Position the table top (A) upside down on a level and protective surface.
2. Align and attach four legs (B) to the apron corners of the table top (A) by using four bolts (AA) with lock
washers (BB) and flat washers (CC) through the corner blocks and screw into the threaded inserts in legs.
DO NOT fully tighten the bolts until after the shelf is installed in step 3.
3. Fit the shelf panel (C) among four legs (B) making sure the mounting holes on corner blocks aligned with
the threaded inserts on legs properly. Insert four bolts (AA) with the washers (BB and CC) through the
corner blocks and screw into place. Securely tighten all the bolts with the provided hex-key wrench.

5
Assembly Instructions
4. Ask for assistance to lift the unit upright and position it at the desired location. Ensure the table leaves
holders are in place when turning the table upright to prevent leave from swing open.
5. If necessary, adjust the pre-attached floor levelers at the bottom of legs (B) to level the unit.
6. The four side leaves are designed to be extended or folded as desired. To extend the side leaf, rotate the leaf
holders underneath the table top (A) and unfold the leaf upwards.
7. Pull the two support bars outward to extend the desired leaf.

6
Assembly Instructions
8. To fold the side leaves, push the support bars inward to drop down the desired leaf and fold to the underside
of table top (A). Rotate the leaf holders to fix the leaf into place.

7
Care and Maintenance
 Use a soft, clean cloth that will not scratch the surface when dusting.
 Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
 Using solvents of any kind on your furniture may damage the finish.
 Never use water to clean your furniture as it may cause damage to the finish.
 Always use coasters under beverage glasses and flowerpots.
 Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.
 Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
 In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
 Check bolts/screws periodically and tighten them if necessary.
Further Advice about Wood Furniture Care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
Quality Guarantee (Not Valid in Mexico)
We are confident that you will be delighted with your Bayside Furnishings® purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or
replace it for up to one (1) year from date of purchase. Every Bayside Furnishings® product is designed to meet
your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights, which vary from state to state
or province to province.
AUSTRALIA: Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Customer Service: 1-877-494-2536 (English, French, Spanish)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
(Valid in U.S. and Canada only)
www.baysidefurnishings.com
MADE IN VIETNAM / FABRIQUÉ AU VIETNAM / HECHO EN VIETNAM