Bayside Furnishings RHSPD-UK User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Bayside Furnishings®Page1 FactoryNo.10944
O'nin®Roast Hazelnut Single Pedestal Desk without Basket
Model # RHSPD-UK
ADULTASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to
the store where it was purchased. Please call our toll-free customer service number and have
your instructions and parts list ready to provide the model name, part name or factory number:
001-877-494-2536 (Service valid only in USA)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
Or visit our website www.baysidefurnishings.com
Or e-mail your request to [email protected]
LOT NUMBER:
DATE PURCHASED: / /

Model # RHSPD-UK
Bayside Furnishings®Page2 FactoryNo.10944
MANUFACTURER: Bayside Furnishings®
CATALOG: O'nin®Roast Hazelnut Single Pedestal Desk without Basket (RHSPD-UK)
DATE OF MANUFACTURE: March 2014
MADE IN CHINA
CAM LOCK SYSTEM OPERATION
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw the Cam Bolt into the threaded insert on the panel.
2. Insert the Cam Lock into the pre-drilled hole on panel.
3. Make sure Cam Lock pointed arrow is pointed towards the entry of Cam Bolt.
4. Connect both panels together; making sure the Cam Bolt goes into the pre-drilled hole on the end
of the panel with the Cam Lock.
5. Once the Cam Bolt is connected inside the Cam Lock, take a Phillips screwdriver (not included)
and tighten the Cam Lock clockwise.
You are now ready to assemble the desk.
MAXIMUM LOAD 20 lb. (9 kg)
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM
WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS
INDICATED MAY RESULT IN INSTABILITY
,
CAUSING POSSIBLE INJURY.
MAXIMUM LOAD 200 lb. (90.7 kg)
MAXIMUM RECOMMENDED WEIGHT LOADS

Model # RHSPD-UK
Bayside Furnishings®Page3 FactoryNo.10944
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware
are present before beginning assembly.
A- Desk Top (1) B- Side Panel (1) C- Bottom Panel (1)
D- Pedestal Front/Back Panel (2) E- Fixed Shelf (1) F- Divider Panel (2)
G-MetalConnector(2) H-MetalBracket(2)
(1)Ø5/16”x2-1/4”Bolt (2)Ø5/16”LockWasher (3)Ø5/16”FlatWasher
(4+1extra) (4+1extra) (4+1extra)
(4)M6x20mmBolt (5)M6LockWasher (6
) M6 Flat Washer
(12+1extra) (12+1extra) (12+1extra)
(7) Large Wood Dowel (8) Small Wood Dowel (9)CamLock
(15+1extra) (20+1extra) (6+1extra)
(10) Cam Bolt (11) Plastic Cap 4 mm Allen Wrench 5 mm Allen Wrench
(6+1extra) (6+1extra) (1) (1)
Tools required: Allen wrench (provided), Phillips screwdriver and mallet (not provided).

Model # RHSPD-UK
Bayside Furnishings®Page4 FactoryNo.10944
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the
unit on a carpeted floor or the empty carton to avoid any scratch.
2. Insert four Small Wood Dowels (8) half way into the pre-drilled holes on the Fixed Shelf (E) by
tapping lightly with a rubber mallet, if necessary. Position 2 Divider Panels (F) onto the inserted
Wood Dowels and press them together.
3. Insert eight Small Wood Dowels (8) into the drilled holes of the Fixed Shelf (E) at both ends.
4. Align the middle holes on Pedestal Front and Back Panels (D) with the inserted Wood Dowels
(8) on the Fixed Shelf (E) and press them together. Make sure that the threaded holes on the
bottom of Pedestal Panels (D) point towards the same direction.
F
E
F
E
F
8
F
FE
F
D
D
E
8
D

Model # RHSPD-UK
Bayside Furnishings®Page5 FactoryNo.10944
Assembly Instructions
5. Insert four Small Wood Dowels (8) into the end holes of bottom Divider Panel (F) and insert
three Large Wood Dowels (7) into each end of the Pedestal Front/Back Panels (D).
6. Using the inserted wood dowels as a guide, attach the Bottom Panel (C) to the Pedestal
Front/Back Panels (D) by screwing four 2-1/4” Bolts (1) with Lock Washers (2) and Flat
Washers (3) into the countersunk holes on the Bottom Panel. Tighten the bolts with 5 mm Allen
Wrench.
7. Securely screw six Cam Bolts (10) into the designated threaded holes on the Desk Top (A),
using a Phillips screwdriver. As shown.
10
A
A
C
8F
123
D
D
FF
C
C
D
7

Model # RHSPD-UK
Bayside Furnishings®Page6 FactoryNo.10944
Assembly Instructions
8. Insert four Small Wood Dowels (8) into the end holes of the upper Divider Panel (F) and insert
three Large Wood Dowels (7) into each end of the Pedestal Front/Back Panels (D). Position the
Desk Top (A) onto the inserted wood dowels and secure it in place by engaging four Cam
Locks (9) (Refer to page 2 on Cam lock system operation supplement).
9. Align and attach the Side Panel (B) to the Desk Top (A) using three Large Wood Dowels (7)
and two Cam Locks (9). As shown. Make sure that the Cam Locks face inward.
A
D
C
B
AB
79
A
D
D
F
C
F
D
A
8
79
A

Model # RHSPD-UK
Bayside Furnishings®Page7 FactoryNo.10944
Assembly Instructions
10.Proceed to secure the Side Panel (B) to the Desk Top (A) by attaching 2 Metal Connectors (G)
at the joints. As shown. Make sure that the curved plates of Metal Brackets (G) face outward.
Insert four 20 mm Bolts (4) with Lock Washers (5) and Flat Washers (6) through the drilled
holes on each Metal Connector (G) and screw into the threaded inserts. Tighten the bolts with
the provided 4 mm Allen Wrench.
11.Ask for assistance to stand the unit upright and position it at the desired location.
12.Plug six Plastic Caps (11) onto the cams lock holes on the Side Panel (B) and Pedestal Panels
(D) to conceal the Cam Locks. Gently tap the Plastic Caps with a rubber mallet to ensure they
are fully seated. The desk is now ready for use.
A
D
B
D
11
A
D
C
BAB
G
4
5
6
456

Model # RHSPD-UK
Bayside Furnishings®Page8 FactoryNo.10944
NOTE: The unit is designed to combine with our Roast Hazelnut Room Divider (model# RHRD,
sold separately). If you buy the Room Divider, the work center configuration can be available.
Use the illustration on page 1 as reference.
13.To combine the desk with our Roast Hazelnut Room Divider (sold separately), first unscrew the
Cam Locks (9) to remove the Side Panel (B) or the assembled pedestal from the Desk Top (A),
depending on the configuration that you want to own. You need to unscrew the bolts to remove
the Metal Connectors (G) as well, if you want to keep the pedestal.
NOTE: Keep the Side Panel (B) or pedestal components and the fasteners at a proper place in
case you will use it.
14.Fasten two Metal Brackets (H) against the side edge of the Desk Top (A); using two 20 mm
Bolts (4) and two Washers (5 and 6) per metal bracket.As shown.
The following steps are only for those who wish to
combine the desk with our Roast Hazelnut Room Divider
(model # RHRD, sold separately) together.
A
B
D
C
A
AH
4
5
6

Model # RHSPD-UK
Bayside Furnishings®Page9 FactoryNo.10944
Assembly Instructions
15.Stand the unit upright and fit the Metal Brackets (H) onto the Center Divider of Roast Hazelnut
Room Divider properly. Make sure that the Desk Top (A) and the Side Panels of Room Divider
are even with each other. To secure the Desk Top (A) in place, tighten the set screw located on
the bottom side of both Metal Brackets (H) by turning the screw clockwise.
16.Position the Storage Baskets included on the Room Divider onto the desired compartments to
finish the assembly.
A
H
H
A

Model # RHSPD-UK
Bayside Furnishings®Page10 FactoryNo.10944
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an
inconspicuous area.
Using solvents of any kind on your furniture may damage your furniture’s finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently.Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that
may create spotting within the furniture finish.
Stains or marks from crayons or ink markers will be difficult to remove.
In the event that your furniture is stained or otherwise damaged during use, we recommend that
you call a professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate controlled environment. Extreme temperature and humidity
changes can cause warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and
helpful tips will enhance your furniture as it ages.
We hope you enjoy your purchase for many years and thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Bayside Furnishings®purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair
or replace it for up to one (1) year from date of purchase. Every Bayside Furnishings®product is
designed to meet your highest expectations. We guarantee that you will immediately see the value of
our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from State
to State. Customer Service: 001-877-494-2536 (service valid only in USA)
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.baysidefurnishings.com
Retailer: Costco Wholesale U.K. Ltd.,
UK Home Office, Hartspring Lane, Watford, Herts WD25 8JS
United Kingdom
01923 213113
Model: RHSPD-UK

IF YOU NEED TO ORDER ANY REPLACEMENT PARTS, PLEASE USE THE LIST BELOW
O'nin
®
Roast Hazelnut Single Pedestal Desk without Basket (RHSPD-UK)
*RHSPD-UK-1-DT Desk Top *RHSPD-UK-12-M6x20B M6 x 20 mm Bolt *RHSPD-UK-2-SP Side Panel *RHSPD-UK-13-M6LW M6 Lock Washer *RHSPD-UK-3-BP Bottom Panel *RHSPD-UK-14-M6FW M6 Flat Washer *RHSPD-UK-4-PFBP Pedestal Front/Back Panel *RHSPD-UK-15-LWD Large Wood Dowel (M15 x 60 mm) *RHSPD-UK-5-FS Fixed Shelf *RHSPD-UK-16-SWD Small Wood Dowel (M10 x 60 mm) *RHSPD-UK-6-DP Divider Panel *RHSPD-UK-17-CL Cam Lock *RHSPD-UK-7-MC Metal Connector *RHSPD-UK-18-CB Cam Bolt *RHSPD-UK-8-MB Metal Bracket *RHSPD-UK-19-PC Plastic Cap *RHSPD-UK-9-2 1/4B Ø5/16” x 2-1/4” Bolt *RHSPD-UK-20-M4AW 4 mm Allen Wrench *RHSPD-UK-10-Ø5/16LW Ø5/16” Lock Washer *RHSPD-UK-21-M5AW 5 mm Allen Wrench *RHSPD-UK-11-Ø5/16FW Ø5/16” Flat Washer *RHSPD-UK-CH Complete Hardware