L.L.Bean Painted Cottage Work Desk User manual

Painted Cottage Collection
Work Desk
Thank you for purchasing our Painted Cottage Work Desk. Assembly of this product requires a
Phillips Head Screwdriver.
We have found it helpful to have a second person present during the assembly process.
Care: Clean with mild soap and wipe dry.
www.llbean.com
1 of 4 0CCK5070602

Product Support 1 800 341 4341
STEP 1
Read through these instructions thoroughly before
beginning assembly. We have found this to be of
great value when first assembling this product. If
you have questions, LL Bean has a customer service
specialist waiting to assist you at [phone]
STEP 2
Remove all parts and hardware from packing
material. Wooden pieces should be placed on a non-
abrasive surface (like the carton or carpet) to prevent
damage to the finish.
STEP 3
Identify all parts using diagram at right
PARTS
STEP 4
Identify and count hardware using diagram at right.
Assembly of this product requires a Phillips
screwdriver. We have found it helpful to have a
second person present during the assembly process.
Assemble in the order as directed.
2 of 4 0CCK5070602

STEP 5
Use a screwdriver to appropriately turn Metal Joiner
(J) counter clockwise so that Metal Bolt (I) can
inserted through the hole in Metal Joiner.
Insert Dowel (K) into the holes at the right and left
side of Back Rail (E) and insert Metal Joiners (H)
and (J) inside the holes in the Back Rail (E). Note:
The hole in the Metal Joiner (H) should aim at the
hole in the other side of the Metal Bolt (I).
Insert only one Metal Bolt (I) inside the threaded
insert in Left Side (C) and Right Side (D),
respectively.
STEP 6
HAVING A SECOND PERSON ON THIS PART
WOULD BE HELPFUL.
Turn the Top Box (A) upside down and attach the
Right Side (D) to the Top Box (A) and Back Rail
(E) by inserting four Hexagonal Screws (L) through
the holes in the Top Box (A) to the holes in the
Right Side (D) and tighten by using Hexagonal
Wrench (M) to turn the Hexagonal Screw (L).
DO NOT ALLOW SIDE PANELS TO SWAY
AS HARDWARE MAY LOOSEN.
3 of 4 0CCK5070602

STEP 7
HAVING A SECOND PERSON ON THIS PART
WOULD BE HELPFUL.
Attach Left Side (C) the same manner as Right Side
(D) in Step 6.
STEP 8
HAVING A SECOND PERSON ON THIS PART
WOULD BE HELPFUL.
Turn the assembled parts upside down and use a
screwdriver and attach Pull Screw (O) to the Pull
(N) to the front panel of the drawers (B). Next,
match the drawer slide in the Drawer (B) with the
drawer slide in the Top Box (A) so the drawer
moves freely.
4 of 4 0CCK5070602