bbf A178122E User manual

Part Number A178122E Keep manual for future reference.
Lot Code #
48" H gh 3 Shelf Bookcase

A178122E
Get Ready to Assemble

Warning Do Don't Why it's
important
Serious
injury may
occur.
• Assemble following all instructions using all
indicated parts and hardware provided.
• Install tip-over retraint provided.
• Install every indicated nail and/or screw.
• Verify furniture is stable on it's own.
• Place heaviest items in the lower drawers or
shelves.
• Remove items that might tempt kids to climb,
such as toys and remote controls from the top
and upper shelves of furniture.
• Do not move unit when
loaded.
• Do not load with a television
or other heavy equipment.
• Do not exceed the maximum
load limits stated in the
instructions.
• Do not allow children to
stand, climb, or hang on
furniture.
Improper
assembly, use
or loading can
lead to product
instability, tip-over
or collapse.
Advertencia Hacer No Por qué es
importante
Se pueden
producir
lesiones
graves.
• Ensamble siguiendo todas las instrucciones
utilizando todas las piezas y ferretería indicados
provistos.
• Instale la retracción de vuelco provista.
• Instale todos los clavos y / o tornillos indicados.
• Verique que los muebles sean estables por sí
mismos.
• Coloque los artículos más pesados en los
cajones o estantes inferiores.
• Retire los artículos que puedan tentar a los
niños a trepar, como juguetes y controles
remotos de los estantes superiores y superiores
de los muebles.
• No mueva la unidad
cuando esté cargada.
• No cargue con un televisor
u otro equipo pesado.
• No exceda los límites
máximos de carga
establecidos en las
instrucciones.
• No permita que los niños se
paren, trepen o cuelguen
de muebles.
El ensamblaje,
uso o carga
inadecuados
pueden provocar
inestabilidad del
producto, vuelco o
colapso.
PLEASE READ WARNINGS
Improper use can cause safety hazards, or damage
to your furniture and household items.
IMPORTANT SAFETY INFORMATION

A178122E
Get to know your Boards
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
A
D
B
B
E
F

A178122E
Get to know your Fasteners
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
Fasteners are shown actual s ze.
H72988 [ 8 ]
KD Bolt
H71659 [ 8 ]
KD Cam
H34174 [ 40 ]
Na l 19mm
H181434 [ 1 ]
#10 x 2"
H107572 [ 1 ]
#8 x 1-1/2"

A178122E
Get to know your Hardware
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
H181419 [ 1 ]
Toggle Bolt
H181411 [ 1 ]
Nylon Cable T e
H23604 [ 8 ]
Shelf P n
H126396 [ 8 ]
Shelf P n Sleeve
H181412 [ 2 ]
Connect ng Plate
Hardware not to scale.

1
STEP A178122E
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
Prepare Panels
A
D
H72988 [ 8 ]
KD Bolt

2
STEP A178122E
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
Assemble Panels
A
B
B
H71659 [ 4 ]
KD Cam
[ 4 ]
Cover Cap
Flush
N velado
Abondant
2X
12 3 4
190°
M n mum

3
STEP A178122E
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
Assemble Panels
H71659 [ 4 ]
KD Cam
[ 4 ]
Cover Cap
D
Flush
N velado
Abondant
B
B
12 3 4
190°
M n mum

4
STEP A178122E
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
Assemble Panels
E
D
H34174 [ 40 ]
Na l 19mm
2mm
1/16"
2mm 1/16"
Safety glasses
Gafas de segur dad
Lunettes de protect on

FIG A
FIG B
5
STEP A178122E
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
Secure un t to the wall w th a t p-over restra nt.
Un dad de seguro a la pared con un s stema de retenc ón de un vuelco.
F xer l'un té au mur avec un d spos t f de retenue renversement.
1. Place un t n des red locat on.
2. Locate wall stud nearest un t center. FIG A
3. On wall, mark center of stud locat on 1" below top of un t. FIG A
4. If a wall stud cannot be located mark hollow wall at un t center. FIG A
5. On back of un t, mark correspond ng locat on 3/8" below top of un t. FIG B
1. Coloque la un dad en el lugar deseado.
2. Local ce p e derecho de pared centro de un dad más próx ma.
3. En la pared del, marque el centro de la ub cac ón del montante 1 "abajo la parte super or de la un dad.
4. S un poste de la pared no se puede local zar marcar pared hueca en el centro de la un dad.
5. En el dorso de la un dad, marque la ub cac ón 3/8 correspond ente abajo la parte super or de la
un dad.
1. Placez l'un té à l'endro t dés ré.
2. Local ser centre d'un té la plus proche de la paro Stud.
3. Sur le mur, centre de emplacement du montant 1 "c -dessous dessus de l'appare l de la marque.
4. S un montant de mur ne peut pas être s tué marquer mur creux au centre de l'un té.
5. Le dos de l'appare l, marquer l'emplacement 3/8 correspondant c -dessous dessus de l'appare l.
Mark wall
Marque la pared
Marquez le mur
1" (25mm)
CENTER
Mark back w th n 6" (150mm) of center.
Marcar de vuelta dentro de 6" (150mm) de centro
Mark dans les 6" (150mm) de centre.
3/8" (10mm)

6
STEP A178122E
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
WALL STUD ATTACHMENT
HOLLOW WALL ATTACHMENT
H181434 [ 1 ]
#10 x 2"
H181412 [ 1 ]
Connect ng Plate
H181419 [ 1 ]
Toggle Bolt
H181412 [ 1 ]
Connect ng Plate
Wood stud
Montante de madera
Stud bo s
Drywall
Paneles de yeso
clo sons sèches
Drywall
Paneles de yeso
clo sons sèches
Drywall
Paneles de yeso
clo sons sèches
Pull wh le t ghten ng
Jale m entras apr eta
T rer tout en resserrant
Dr ll 1/8" hole 2" deep at mark on wall.
Taladro 1/8 "agujero 2" de profund dad en la marca en la pared.
Percer 1/8 "trou de 2" de profondeur à la marque sur le mur.
Dr ll 1/2" hole 1" deep at mark on wall.
Taladro 1/2 "agujero 1" de profund dad en la marca en la pared.
Percer 1/2 "trou de 1" de profondeur à la marque sur le mur.

7
STEP A178122E
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
H181412 [ 1 ]
Connect ng Plate
H181411 [ 1 ]
Nylon Cable T e
Use replacement cable t e w th m n mum break ng strength of 120lbs.
Ut l ce reemplazo empate Cable con res stenc a a la rotura mín ma de 120 l bras.
Ut l sez remplacement Attache de câble avec une force de rupture m n male de 120 lbs.
Correct
Correcto
Corr ger
Pull to ver fy lock
T re para ver f car cerradura
T rez pour vér f er serrure
H107572 [ 1 ]
#8 x 1-1/2"
Dr ll 1/8" hole 1" deep at mark on un t.
Taladro 1/8 "agujero de 1" de profund dad en la marca de la un dad.
Percer 1/8 "trou 1" de profondeur à la marque sur l'un té.

8
STEP A178122E
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
H23604 [ 8 ]
Shelf P n
H126396 [ 8 ]
Shelf P n Sleeve
F
Maximum Weig t: 0 Lbs.
Peso Máximo: 0 Libras
Poids Maximum: 0 kilogramme
Maximum Weig t: 50 Lbs.
Peso Máximo: 50 Libras
Poids Maximum: 22.6 kilogramme
Maximum Weig t: 50 Lbs.
Peso Máximo: 50 Libras
Poids Maximum: 22.6 kilogramme
8X
Gently clean surfaces
w th a damp sponge eraser.
Congratulat ons! You are all done. If
you have any quest ons or concerns,
please call.

PARTS LIST A178122E
Have an assembly quest on or need a replacement part? Just call
1-8 -95 -4782, we are here to help.
W178107
[ 1 ]
D
B[ 2 ] W178132
W178104
[ 1 ]
A
BK4836AC
BK4836MR
A[ 1 ] W178092
W178126
[ 2 ]
B
D[ 1 ] W178095
E[ 1 ] W178128
F[ 2 ] W178097
W178101
[ 1 ]
D
B[ 2 ] W178129
W178098
[ 1 ]
A
BK4836MC
W178091
[ 2 ]
F
W178125
[ 1 ]
E
W178089
[ 1 ]
D
W178123
[ 2 ]
BW178086
[ 1 ]
A
BK4836CS
F[ 2 ] W178109
W178134
[ 1 ]
E
F[ 2 ] W178121
W178140
[ 1 ]
E
W178119
[ 1 ]
D
B[ 2 ] W178138
W178116
[ 1 ]
A
BK4836NC
W178103
[ 2 ]
F
W178131
[ 1 ]
E
W178115
[ 2 ]
F
W178137
[ 1 ]
E
W178113
[ 1 ]
D
B[ 2 ] W178135
W178110
[ 1 ]
A
BK4836HC

MODEL SPECIFIC A178122E
BK4836CS BK4836MR
BK4836AC
BK4836MC
BK4836HC BK4836NC
H107306 [ 8 ]
Cover Cap
H73621 [ 8 ]
Cover Cap
H107305 [ 8 ]
Cover Cap
H163153 [ 8 ]
Cover Cap
H95137 [ 8 ]
Cover Cap
H73620 [ 8 ]
Cover Cap