BCP SKY6737 User manual

SKY6737 + SKY6738
Ver. 1
Child's Picnic Table
with Umbrella
INSTRUCTION
MANUAL

•Please do not exceed the weight limitations of this item.
•Do not stand on or use any part of this item as a step ladder.
•Firmly secure all bolts, screws, and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•Be aware this product includes an umbrella with a pointed tip, handle with care.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
•This product is intended for residential use only.
Please retain these instructions for future reference.
2|
HARDWARE
1
36 PCS
M3.5 x 40mm
SCREW
M6 x 45mm
SCREW
2
16 PCS
TOOLS REQUIRED
UP TO 30 MIN.
ASSEMBLY
PHILLIPS
SCREWDRIVER 220 LBS
OVERALL
CAPACITY
LBS
NOTICE
AGE RANGE:
3 - 7 YEARS OLD
2 PERSON
ASSEMBLY
ALLEN WRENCH
(PROVIDED)

| 3
2 PCS
TABLETOP
CENTER PLANK
6 PCS
BENCH/TABLE
EDGE PLANK
D
2 PCS
LOWER SUPPORT
PARTS
AB
E
4 PCS
LEG
2 PCS
UPPER SUPPORT
C
1 PC
CROSSBEAM
F
G
1 SET
UMBRELLA

PRODUCT ASSEMBLY
1Locate one part E leg and attach one part C upper support and one part D lower support with
four part 2 screws, two screws per support.
Attach a second leg to the assembly with four part 2 screws.
2Repeat step 1 to assemble a second leg set, then with a second person, attach two part A tabletop
center planks to the part C upper supports with eight part 1 screws, four screws per plank.
Be sure each center plank is properly aligned before proceeding to the next step.
NOTE: Make sure the upper and lower supports face one another with the legs on the outer edges.
4|
2x4
E
E
C
D
2x4
1
x8
A
x2

PRODUCT ASSEMBLY
3Attach two part B planks to the part C upper supports with eight part 1 screws, four screws
per plank.
Attach four part B planks to the part D lower supports with sixteen part 1 screws two planks per
side and four screws per plank.
4
| 5
1
x16
B
x4
1
x8
B
x2

PRODUCT ASSEMBLY
5With a second person, flip the assembly so the tabletop sits on the ground, attach the part F
crossbeam to the two part D lower supports with four part 1 screws.
Flip the table upright, then locate both halves of the part G umbrella. Lift the lever on the lower
section, then insert the top/canopy section into the opening.
NOTE: Please add minimum insertion depth (2.5 in)
of top section into the lower section.
6
6|
1
x4
F
G

| 7
PRODUCT ASSEMBLY
7Lower the lever to secure the canopy, then insert the assembled umbrella into the opening in
the center of the part A tabletop center planks.
Open the part G umbrella by pushing the canopy upward until you hear an audible click.
G

All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, unapproved modification, or neglect of this product.
HELP CENTER
Product Assembly
Product InquiryChat Support Returns & Refunds
Orders FAQ
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!