Beamever LINIO NEON 0408 SV Datasheet

Bending Diameter
30mm
1. The most suitable operation temperature
shall be -25°C to 55°C.
2. Please make sure that even during installa-
tion, the predetermined bending direction will
never change. The product is SIDE bending
only, and it can’t be twisted or top bending.
3. LINIO NEON 0408 SV shall not be bent
sharply and it may cause product damage.
4.The maximum bending diameter is 30mm,
over bending will damage and void any
warranty.
5.During the installatiom, the LINIO NEON
0408 SV can not be:
-Twisted
-Dropped
-Bent at a 90°angle or bent at all
-Sagging/Hanging down
6. Please make sure the product does not
stick with any paper related material directly.
7. For installation, 2 ways for your selection.
-Mounting clips
-Aluminum profile
8. Install the product into profile carefully and
correctly, taking out and re-assembling will
most likely cause the product damaged.
LINIO NEON 0408 SV
USING INSTRUCTION
Do not twist Do not hang Do not droop
Bend too tight
4 mm
8 mm
LIGHT SOURCE
LIGHT SOURCE
LIGHT SOURCE
LIGHT SOURCE
Warranty: All LED light are warranted to be
free from defects in product itself from the
date of purchase.
Within this period, we, at its sole option, repair
or replace any components which fail from
correct use. Such repairs or replacement will
be made at no charge to the customer for
parts only, provided that the customer shall be
responsible for transportation cost of the
goods.
This warranty does not cover failures due to
abuse, misuse, improper handling, act of
nature, negligence, normal wear, accidental
damage, modifications or repairs made by the
purchaser or incorrect voltage conditions.

1 2
2 2 2
≥30cm
1Mtr/pcs
Aluminum profile
Press in gently with palm
instead of fingers.
GLUE
7
45