BeautyRelax BR-1150W User manual

Cosmetic face device BR-1150W / BR-1150 User manual | strana 1
U
US SE ER R M MA AN NU UA AL L
Cosmetic face device
BR-1150W / BR-1150

Cosmetic face device BR-1150W / BR-1150 User manual | strana 2

Cosmetic face device BR-1150W / BR-1150 User manual | strana 3
CONTENT:
INTRODUCTION 4
SPECIFICATIONS 4
NOTICE 5
PACKAGE CONTENTS 5
ULTRASONIC WAVES 6
PHOTON THERAPY 7
IONIZATION - GALVANIC CURRENT 9
VIBRATING MASSAGE 10
DEVICE DESCRIPTION 11
BUTTONS DESCRIPTION 12
DISPLAY DESCRIPTION 12
DEVICE FUNCTIONS SETTING 13
COMBINING FUNCTIONS 14
METHOD OF TREATMENT OF THE FACE AND NECK 15
ELIMINATION OF PIGMENT SPOTS 17
ACNE SKIN TREATMENT 17
TREATMENT OF DARK CIRCLES UNDER THE EYES 18
SENSITIVE SKIN TREATMENT 18
WHAT RESULTS YOU CAN ACHIEVE 18
BATTERY CHARGING 19
MAINTENANCE AND CLEANING 19
TECHNICAL PARAMETERS 19
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT 20
IMPORTER 20
DECLARATION OF CONFORMITY 21

Cosmetic face device BR-1150W / BR-1150 User manual | strana 4
INTRODUCTION
Dear customer, thank you for purchasing our product. Please read these operating instructions
carefully before first use and keep them for future reference.
The BeautyRelax BR-1150 cosmetic device will pamper your skin with several technologies: ultrasonic
waves, photon therapy, ionization and, in addition, a pleasant high-frequency mechanical massage.
And all this effectively, painlessly, non-invasively!
Treatment technology:
1. Ultrasonic waves
2. Photon Therapy
3. Ionization
4. High frequency massage
SPECIFICATIONS
 Ultrasonic wave technology with 3MHz frequency.
 Three light modes of photon therapy: red, blue and green.
 High-frequency massage.
 Stainless steel applicator.
 Use is absolutely safe and painless.
 Gentle on the skin.
 Suitable for all skin types.
 Easy to operate with buttons on the body.
 Compact, small and lightweight.
specific power and frequency of ultrasonic waves
non-invasively | safe | painlessly | gentle
1)
default state
the skin is withered
makes a tired impression
shows signs of aging
2) achievable results
starts processes in the dermis layer
remodeling of collagen fibers and elastin
smoothing of sagging and deformed contours

Cosmetic face device BR-1150W / BR-1150 User manual | strana 5
NOTICE
 Before using for the first time, read these operating instructions, view all
illustrations and keep them for future reference.
 If your skin is affected by a serious skin condition, do not use the appliance.
Consult your doctor for first time use.
 The device is primarily intended for your personal use. Do not share it with
family or friends. If the device is used by more than one person, pay special
attention to the principles of hygiene.
 Never operate the appliance if it is damaged, does not work properly or has fallen into water.
 To prevent electric shock, do not touch the inside of the unit if it is broken.
 If the unit is dropped, it may be damaged. In this case, do not continue to use the device and
contact the dealer's service department.
 Do not use the appliance near water or in places with high humidity (bath, shower, swimming
pool, etc.).
 The appliance is not washable. It must not be immersed in water or under running water.
 Do not leave the device unattended. Always switch off the appliance thoroughly after each use.
 If the unit has been moved from a very cold to a very warm environment, wait at least 3 hours
before using it.
 The appliance is not intended for use by children or persons whose physical or mental condition
does not allow the appliance to be used safely.
 Do not place or use the appliance on hot heat sources (radiator, stove, fire, etc.)
 Do not attempt to disassemble or repair the device yourself.
 Store the device in a dry environment. Try to protect it from dust.
 Do not expose the device to direct sunlight.
 The distributor is not liable for damage caused by improper use contrary to the instructions in
these operating instructions. He is not responsible for the consequences caused by non-
compliance with the safety instructions.
 The distributor is not liable for any damage to health or property caused by other uses.
PACKAGE CONTENTS
 Cosmetic face device.
 Charging USB cable.
 Protective textile glasses.
 User manual.

Cosmetic face device BR-1150W / BR-1150 User manual | strana 6
ULTRASONIC WAVES
The stainless steel applicator releases energy with a specific power and
frequency of 3MHz when applied to the treated area. The values are
optimized to cause a thermal gradient that significantly affects the
processes in the dermis layer. The supplied energy activates the
remodeling of collagen fibers and elastin. The maximum possible energy
targeting even in localities with a more pronounced fat layer and the
subsequent excitation of metabolic processes has a significant effect on
the very effective smoothing of drooping and deformed contours.
Main advantages
 Completely non-invasive nature of the treatment.
 Safe, painless and without any discomfort.
 Effective on withered and unhealthy looking skin.
 The skin has a rejuvenated and radiant appearance.
Note:
When using the ultrasonic wave function, always use a clear conductive gel that you purchase in all
medical supply stores. Before use, apply a thin layer on the head of the device. The gel improves the
conductivity and overall transmission of waves from the head to the skin. After the treatment, clean
the application head thoroughly with a dry cloth (do not use any aggressive cleaning agents or
solutions).
the presence of
ultrasonic waves
demonstrates the
oscillation of the water
sample droplets

Cosmetic face device BR-1150W / BR-1150 User manual | strana 7
PHOTON THERAPY
Light therapy is one of the oldest methods that help fight various skin defects.
Photon therapy uses natural light waves generated by LEDs. Waves in
specific lengths are passed to the skin. Light penetrates the body as a
stream of energy (in the form of photons), which is absorbed by the
individual components of the skin. Different wavelengths of light result
in specific skin care effects. Light can enter the cell non-invasively and
painlessly. Light activates photoreceptors in cells. Photon therapy does not
cause any side effects or damage to the body. Model BR-1150 combines 3
types of lights (red, blue, green).

Cosmetic face device BR-1150W / BR-1150 User manual | strana 8
RED LIGHT (wavelength 625nm)
- Supports natural collagen production.
- Increasing the efficiency of absorption of active ingredients of cosmetics.
- Improving blood circulation in the subcutaneous tissue.
- Prevents the formation of pigment.
BLUE LIGHT (wavelength 465nm)
- Activates porphyrins (they start a chemical reaction that destroys harmful bacteria).
- Antibacterial and anti-inflammatory effect.
- Prevention of acne.
- Safe and effective treatment.
GREEN LIGHT (wavelength 525nm)
- Contributes to the elimination of epidermal pigment spots.
- Slows down melanin production by 40 to 60%.
- Balances skin tone.
- Anti-inflammatory effect.
- Suitable for all skin types.

Cosmetic face device BR-1150W / BR-1150 User manual | strana 9
IONIZATION - GALVANIC CURRENT
Ionization is a process during which ions penetrate directly into the
individual layers of the skin. Skin pores are loosened. By the action of ions,
the cells gain a better ability to absorb nutrients from creams, masks and
serums deeper into the skin. The treatment is suitable for dry, oily and
sensitive skin. The undeniable advantage of the action of ions is the better
natural absorption of moisture.
NEGATIVE IONS
Dull, tired looking skin.
Signs of stress.
Swelling.
POSITIVE IONS
Thorough cleansing of the skin.
Dark spots in the eye area.
Adhering impurities in the skin.
WHY NEGATIVE IONS?
It increases the ability to absorb nutrients from creams, masks and serums deeper into the skin.
Overall, it refreshes the skin, relaxes muscle tissue and has an antimicrobial effect.
WHY POSITIVE IONS?
It contributes to the renewal of collagen fibers.
Helps with thorough cleaning.
positive
negatively
ions
ionization improves
the absorption of
creams and sera

Cosmetic face device BR-1150W / BR-1150 User manual | strana 10
VIBRATING MASSAGE
The application head has the function of high-frequency mechanical
massage. Generates fine oscillations with a frequency of 12,000
oscillations / second. The main effect is to improve blood circulation
by stimulating the lymphatic system of the face. The result is
smoother, fresher skin. Better tone (skin is more uniform in color). At
the same time, mechanical stimulation of collagen and elastic fibers
occurs..

Cosmetic face device BR-1150W / BR-1150 User manual | strana 11
DEVICE DESCRIPTION
application head
LCD display
body device
CONFIRM button
SHIFT button
MODE button
POWER button

Cosmetic face device BR-1150W / BR-1150 User manual | strana 12
BUTTONS DESCRIPTION
POWER
The POWER button acts as the ON / OFF button to turn the device on and off. You can turn off the
device immediately with the POWER button at any time.
MODE
The mode button is used to switch between functions. Function selection always confirms function
name flashes (Ultrasonic, Clean +, Nutri -, Relax, Photon, Time). If no function is set, the device
automatically turns off after 1 minute.
SHIFT
The SHIFT button is used to set the level and intensity of the selected functions. For vibration
function, you can select intermittent or continuous mode.
CONFIRM
Once you have finished setting all the functions, press the CONFIRM button to start the operation.
The CONFIRM button also works as the START / PAUSE button. You can pause and continue with the
CONFIRM button.
DISPLAY DESCRIPTION
3Mhz ultrasound therapy
,
5 levels of intensity
Ionizace +
Ionizace -
High frequency mechanical
massage
Photon therapy
Timer
range: 1 - 15 minutes

Cosmetic face device BR-1150W / BR-1150 User manual | strana 13
DEVICE FUNCTIONS SETTING
Now, let's describe how to set up each device's features. It is always based on the initial standby
condition that occurs when the device is switched on by pressing the POWER button.
U
UL LT TR RA AS SO OU UN ND D W WA AV VE ES S
1) Press the MODE button once ("Ultrasonic" starts blinking).
2) Use the SHIFT button to set the level of ultrasound waves. A range of 1 to 5 is available.
3) Press the CONFIRM button once. The head starts generating ultrasound waves and you can start
with skin treatment. The ultrasonic wave function on is signaled by the flashing of the wave level
signaling.
4) Press the MODE button 6 times. Use the SHIFT button to set the treatment duration in the range
of 1 to 15 minutes.
5) Press the CONFIRM button once. The ultrasonic wave function will be triggered for the time you
set.
6) Turning on the ultrasonic wave function is accompanied by a soft beep at approximately 4
seconds.
7) You can pause / start this function at any time by pressing the CONFIRM button.
8) After the set time has elapsed, the unit will turn off automatically.
Note:
When using ultrasonic waves, always use a clear conductive gel that you buy in all healthcare stores.
Apply a fine coat to the head of the device before use. Gel improves conductivity and overall wave
transmission from the head to the skin. After finishing the treatment, carefully clean the application
head with a dry cloth (do not use any aggressive cleaning products or solutions).
Info:
You can verify the presence of ultrasonic waves in a simple way. When using ultrasonic wave
function, apply two to three small drops of water on the application head. The water sample thus
deposited is instantly thawed by ultrasonic waves.
P
PH HO OT TO ON N T TH HE ER RA AP PY Y
!!! Warning !!! Before setting up the photon therapy function, use the protective textile goggles that
are included in the package.
1) Press the MODE button 5 times (the text "Photon" starts blinking).
2) Use the SHIFT button to adjust the color of the photon therapy: red, blue, green.
3) Press the CONFIRM button once. The head begins to produce photon light and you can start skin
treatment.
4) Press the MODE button once. Use the SHIFT button to set the treatment duration in the range of 1
to 15 minutes.
5) Press the CONFIRM button once. The photon therapy function will run for the time you set up.
6) Turning on the photon therapy function is accompanied by a gentle beep at approximately 4
seconds.
7) You can pause / start this function at any time by pressing the CONFIRM button.
8) After the set time has elapsed, the unit will turn off automatically.

Cosmetic face device BR-1150W / BR-1150 User manual | strana 14
I
IO ON NI IZ ZA AT TI IO ON N ( (G GA AL LV VA AN NI IC C C CU UR RR RE EN NT T) )
POSSITIVE ION
1) Press MODE twice (the text "Clean +" starts blinking).
2) Use the SHIFT button to set the ionization level. A range of 1 to 5 is available.
3) Press the CONFIRM button once. The device's head will generate positive ions and you can start skin
treatment.
4) Press the MODE button 4 times. Use the SHIFT button to set the treatment duration in the range of 1 to
15 minutes.
5) Press the CONFIRM button once. The ionization function will run for the amount of time you have set.
6) Turning on the therapy ionization function is accompanied by a soft beep at approximately 4 seconds.
7) You can pause / start this function at any time by pressing the CONFIRM button.
8) After the set time has elapsed, the unit will turn off automatically.
NEGATIVE ION
1) Press MODE 3 times (text "Nutri -" will flash).
2) Use the SHIFT button to set the ionization level. A range of 1 to 5 is available.
3) Press the CONFIRM button once. The device's head will generate negative ions and start skin
treatment.
4) Press the MODE button three times. Use the SHIFT button to set the treatment duration in the range of
1 to 15 minutes.
5) Press the CONFIRM button once. The ionization function will run for the amount of time you have set.
6) Turning on the therapy ionization function is accompanied by a soft beep at approximately 4 seconds.
7) You can pause / start this function at any time by pressing the CONFIRM button.
8) After the set time has elapsed, the unit will turn off automatically.
H
HI IG GH H F FR RE EQ QU UE EN NC CY Y M MA AS SS SA AG GE E
The device offers two vibration massage modes. Intermittent and continuous.
1) Press MODE 4 times (the text "Relax" starts blinking).
2) Use the SHIFT button to set the intermittent or continuous massage.
Interrupted (ripples are dashed) Continuous (ripples are solid).
3) Press the CONFIRM button once. The head of the instrument starts vibrating and you can start skin
treatment.
4) Press the MODE button 6 times. Use the SHIFT button to set the treatment duration in the range of 1 to
15 minutes.
5) Press the CONFIRM button once. The vibration function will be triggered for the time you have set.
6) Turning on the vibration function is accompanied by a soft beep at approximately 4 seconds.
7) You can pause / start this function at any time by pressing the CONFIRM button.
8) After the set time has elapsed, the unit will turn off automatically.
COMBINING FUNCTIONS
You can combine all of the above functions freely. In practice, this means that you can treat your skin
at one time with one or all of the features. The following rules apply when setting up functions:
1) Use the MODE button to change the individual functions.
2) Use SHIFT to set the levels or intensity of the functions.
Use the MODE and SHIFT buttons to set all the functions to be started during the treatment. If the
function pointer is at zero (the checkbox is not filled in), the function is not ready to run. When
everything is set, including the time, press the CONFIRM button. This will trigger the functions you
have activated in the previous step.

Cosmetic face device BR-1150W / BR-1150 User manual | strana 15
METHOD OF TREATMENT OF THE FACE AND NECK
FOREHEAD:
move away from the center
facing the edge, gradually cover the entire
area
NOSE:
move from the forehead around the
nose to the face, from top to bottom
FACE:
move your face in the direction
bottom to top
CHIN:
Move from the tip of the chin along the
contours of the face, from bottom to top
T ZONE
:
move from forehead to the tip of the
nose
NECK:
Move from the chin towards the ear
and then down to the neck
Note:
Try to keep the application head during treatment in contact with the skin as much as possible.

Cosmetic face device BR-1150W / BR-1150 User manual | strana 16
For best results, we recommend that the skin be treated with the device no longer than 30 minutes
approximately 3 times a week.
Krok 1: Deep cleaning
1. Select the ionization function [Clean +] & ultrasonic wave [Ultrasound] & vibration massage
[Relax]. Choose the appropriate intensity that will make you comfortable.
2. Use a cotton swab to remove any residual skin moisture. You can now begin skin care. Optimal
time 8 to 10 minutes. Apply the application head slowly to your skin. After the device, wash the skin
with water to complete the cleaning process.
Krok 2: Improved absorption of nutrients from seros and
preparations
1. Select the ionization function [Nutri -] & ultrasound [Ultrasound] & vibration massage [Relax].
Choose the appropriate intensity that will make you comfortable.
2. In this step, you can combine instrumentation with the following cosmetic products: toning lotion,
nourishing preparations, essential oil, aloe vera gel, ...)
Optimal time 8 to 10 minutes. Apply the application head slowly to your skin.
Krok 3: Photon therapy
1. Select [Photon] photon therapy and select the color to suit your needs.
RED LIGHT (wavelength 625nm)
Supports natural collagen production. Increasing the effectiveness of absorption of active substances
in cosmetic products. Improved blood circulation in the subcutaneous tissue. It prevents the
formation of a pigment.
BLUE LIGHT (wavelength 465nm)
Activates porphyrins (they start a chemical reaction that destroys harmful bacteria). Antibacterial
and anti-inflammatory effect. Prevention of acne. Safe and effective treatment.
GREEN LIGHT (wavelength 525nm)
Helps eliminate epidermal pigment spots. It slows production of melanin by 40 to 60%. It balances
the color tone of the skin. Anti-inflammatory effect. Suitable for all skin types.
2. Optimal time 8 to 10 minutes. Apply the application head slowly to your skin.
Krok 4: Relaxation and support of blood circulation
1. Select the [Relax] vibration massage function. Select intermittent or continuous mode. Apply the
application head to your skin. Approximately 10 seconds later, move your head a little further. This is
done by so-called point movement all over your face. Move the head over your skin where the
vibration treatment is pleasant.
2. Optimal time 8 to 10 minutes.
This type of treatment is ideal as the final skin treatment step. The skin relaxes, relieves stiff soft
muscles and supports the lymphatic system of the face.

Cosmetic face device BR-1150W / BR-1150 User manual | strana 17
ELIMINATION OF PIGMENT SPOTS
frequency of repetition: every second day
Step 1:
Depth intensive skin cleansing (same way as in the previous paragraph).
Step 2:
Improve absorption of nutrients (in the same way as in the previous paragraph).
Step 3:
Photon therapy (select red and green light). Always wear safety glasses !!
Each color lasts 10 to 15 minutes.
ACNE SKIN TREATMENT
frequency of repetition: every evening
Krok 1:
Clean the skin. Use the ultrasonic wave function and select the appropriate intensity. Ultrasonically
treat the skin for 5 minutes. Wash the skin with water and dry.
Krok 2:
Use the ultrasonic wave function in combination with a photon light (blue light). Always wear safety
glasses!!
Recommended time: 10 to 15 minutes.
Krok 3:
Use the ultrasonic wave function in combination with vibrations as needed. Select intermittent or
continuous mode. Recommended time: 5 minutes.
Note: Use of ultrasonic waves and vibrations may cause slight warming of the skin. This is absolutely
normal and you do not have to worry. Apply the skinhead during skin care slowly to the skin. Do not
press too much on the device.

Cosmetic face device BR-1150W / BR-1150 User manual | strana 18
TREATMENT OF DARK CIRCLES UNDER THE EYES
frequency of repetition: once a week
Step 1:
Depth intensive skin cleansing (same way as in the previous paragraph). Focus especially on the area
around the eyes. Wash your skin thoroughly with water and dry.
Step 2:
Select the ultrasonic wave function and set very fine intensity (level 1, maximum 2). Add the photon
therapy function (red or blue light Recommended time: 10 minutes Always use safety glasses !!).
Step 3:
Select the vibration function. Set intermittent or continuous mode to the one that suits you best.
Apply the head in the area around the eyes. Recommended time: 5 minutes.
SENSITIVE SKIN TREATMENT
frequency of repetition: once a week
1. Select the ultrasonic wave function.
2. Select the photon therapy function (green and blue light). Recommended time for every light: 10
minutes.
!!! Warning !!! Before you set up photon therapy, use the
safety glasses included in the package.
WHAT RESULTS YOU CAN ACHIEVE
Once the treatment has finished, the skin may slightly redden. Redness is caused by enlarged blood
vessels and increased blood flow. In some cases, mild swelling may occur, which in particular causes
the occurrence of more fluid at specific sites than at other sites. These symptoms, however, mean
that you have achieved the desired goal. All these at first glance negative symptoms disappear slowly
shortly after the treatment is complete.
The result of the treatment will be the visible improvement in skin elasticity and texture. The skin will
be smoother and will soften the transitions in the coarser areas of the skin. The treated area of the
complexion will have significantly finer mimic and fancy wrinkles. The results depend primarily on
following all skin and skin treatment steps.
Clinical studies have shown that the observed users showed a 30% reduction in fine lines and 16%
more marked wrinkles over a 4-week period. Overall, skin quality has improved dramatically both
visually and on the touch. The results varied according to the individual skin properties, age and sex
of the user.

Cosmetic face device BR-1150W / BR-1150 User manual | strana 19
BATTERY CHARGING
The device has a built-in internal rechargeable battery type Li-ion 1150mAh. It is charged using the
cable included in the package. Always make sure that the cable is not damaged. Use the USB port of
a computer or laptop for charging.
MAINTENANCE AND CLEANING
Always make sure that the application head is cleaned after finishing the treatment. Do not use any
aggressive detergents. We recommend using special disinfecting sprays that are commonly used in
healthcare or beauty salons for cleaning tools. Use this product to clean the stainless steel
application head only. Make sure the moisture does not penetrate the device.
TECHNICAL PARAMETERS
 Frequency: 3 MHz.
 Red light wavelength: 625 nm.
 Blue light wavelength: 465 nm.
 Green light wavelength: 525 nm.
 Photon therapy is provided by powerful LEDs.
 The package includes protective textile goggles (in photon therapy mode).
 Dimensions: 5x17x5cm.
 Weight: 165g.
 Battery: built-in Li-ion 1150mAh.
 Power supply: USB cable.

Cosmetic face device BR-1150W / BR-1150 User manual | strana 20
DISPOSAL OF USED ELECTRICAL AND
ELECTRONIC EQUIPMENT
This symbol on the products or accompanying documents means that used electrical
and electronic products must not be disposed of with normal household waste. For
proper disposal, recovery and recycling, please take these products to designated
collection points. Alternatively, in some European Union countries or other European
countries, you may return your products to your local retailer when buying an
equivalent new product. The correct disposal of this product will help save valuable
natural resources and help prevent potential negative consequences for the environment and human
health, which could be caused by inappropriate waste handling. Contact your local authority or
nearest collection point for more details. This symbol is valid in the European Union. To dispose of
this product, request the local authorities or your retailer about the correct disposal method.
CERTIFICATION
The product is approved for use in the European Union and is CE marked. The declaration
of conformity and all documentation are available from the importer.
IMPORTER
SANTADRIA s.r.o., Mojmírovo nám. 75/2 Brno, 612 00 Czech republic
Company ID: 29195454
If you have any questions about the product, please feel free to contact us:
Email: [email protected]
Typographical errors, properties and changes in technical parameters reserved.