Bebe style MeGrow User manual
Bebe Style MeGrow
High Chair
Instruction
Manual
To ensure safe, trouble free use, please take a little time to read the important safety notes
and the instructions.
IMPORTANT: KEEP THIS INSTRUCTION MANUAL FOR FUTURE
REFERENCE
(To download visit www.bebestyle.co.uk)
It is strictly prohibited to use this product without adult supervision.
Maximum weight allowance is 60KG
To avoid suffocation dispose all plastic bags appropriately.
This product complies with EN 14988-I/2:2006+AI:2012 & BS EN 12790:2009
Highchair
Bouncer
1. Supporting tube x 4 (two go in the seat fabric
and two on the frame).
2. Foot rest x 1
3. Frame/ legs x 2 left & right.
4. Seat fabric x 1
5. Tray brackets x 2
6. Insert zip.
7. Side guard fabric x 2
The Four Stages
0-6 Months 6 months – 8 years
8 Years + Up to 60KG
Rocking chair Highchair
0-6 Months Assembly – Rocker
1. Hold the frame horizontally with the tray brackets facing inwards,
and bolt on two supporting frames as shown.
2. Then attach the second frame.
3. Place the seat/rocking seat fabric on the frame as shown.
4. Attach the two side guard fabrics as shown.
6 Months - Child Assembly – The Highchair.
A. Feed the supporting tubes through the fabric, and then roll the fabric
around the tubes to designated length needed.
B. Attach the tube that is in the base of the seat fabric into the bracket
on the chair legs.
C. Attach top tube to the top of the chair base with 2 screws.
The Tray installation.
Insert the two ends of the tray into the white brackets on the frame at the
same time.
Use the two white sliding triggers on the try to adjust the width of the tray to
make it more comfortable for your little one.
To remove the tray pull back on the two sliding buttons on the tray and pull
out the tray from the seat frame.
8 year – Adult Assembly – The Chair.
Unravel the fabric in order to make the seat fabric longer.
Move the lower support tube to the lower holes in the seat frame.
WARNING: Never leave a child unattended in this
product.
WARNING: Never attempt to tighten or loosen the
screws with you child still in the chair.
Made in China
Bebe Style Ltd NW2 1BG
www.bebestyle.co.uk
Complies with EN 14988-I/2:2006+AI:2012 & BS EN 12790:2009
Other Bebe style High Chair manuals
