Bebe style PSDH72 User manual

DELUXE PEDESTAL SWIVEL
HIGHCHAIR
PSDH72
WARNING!
READ THIS MANUAL
Do not use this product until
you read and understand the
instructions in this manual.
KEEP INSTRUCTIONS FOR
FUTURE USE.
This product is designed to
be used by a child who can
sit upright unassisted, up
to a MAXIMUM weight of
18.1 kg.

WARNING! PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR SLIDING OUT.
WARNING! ALWAYS SECURE CHILD IN THE RESTRAINT. ALWAYS KEEP YOUR CHILD IN VIEW.
WARNING! FOR YOUR CHILD’S SAFETY, FOLLOW ALL LABELS ON THIS PRODUCT AND IN THESE
WRITTEN INSTRUCTIONS. DO NOT INSTALL OR USE THIS PRODUCT UNTIL YOU READ AND
UNDERSTAND THE WARNINGS AND ASSEMBLY INSTRUCTIONS. FAILURE TO FOLLOW THESE
WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
WARNING! NEVER LEAVE A CHILD UNATTENDED.
WARNING! This product is designed to be used by a child who can sit upright unaided, up to
MAXIMUM weight of 18.1 kg.
KEEP THESE INSTRUCTIONS FOR FUTURE USE.
READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND USE.
THE CHILD SHOULD BE SECURED IN THE HIGH CHAIR AT ALL TIMES BY THE RESTRAINING SYSTEM.
THE TRAY IS NOT DESIGNED TO HOLD THE CHILD IN THE CHAIR.
WARNING! Remove all packaging and discard. Lay out all parts as per the Parts List to facilitate
assembly.
If you experience any difficulties, please contact the Customer Service Department at
[e-mail]
REMOVE PACKING MATERIALS AND POLYBAGS, AND DISPOSE OF THEM BEFORE ASSEMBLY.
PLASTIC BAGS CAN CAUSE SUFFOCATION. KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM
CHILDREN. ADULT ASSEMBLY REQUIRED. FOLLOW ASSEMBLY INSTRUCTIONS CAREFULLY.
DO NOT use this product without properly assembling it. Keep unassembled parts out of the reach
of small children.
! CHOKING HAZARD- Small parts: Ensure children do not play with unassembled product, as there
are small parts that could cause choking if swallowed.
WARNING! ! THE CHILD SHOULD BE SECURED IN THE HIGH CHAIR AT ALL TIMES BY THE
RESTRAINING SYSTEM. THE TRAY IS NOT DESIGNED TO HOLD THE CHILD IN THE CHAIR.
! Snugly adjust harness belt around child.
! NEVER carry or move the high chair with child in it.
! DO NOT place high chair near walls or furniture that the child can push against and tip over.
! When adjusting any part of this product, the child should be clear of all moving parts.
! Be sure both sides of tray are firmly in place.
STRANGULATION HAZARD:

• DO NOT place high chair in any location where there are cords within the child’s reach, such as
telephone cords, window blind cords, monitor cords, etc.
• Small children or pets can force themselves into very small openings.
• NEVER tie or add anything to the chair (i.e. accessories, toys, etc.) as this may cause serious injury,
i.e. choking.
DO NOT EXCEED THE MANUFACTURER’S RECOMMENDED LOAD as this product can become
unstable and cause serious injuries.
! Check screws every 1-2 months for looseness and tighten as necessary.
! DO NOT allow others to use this product unless they read & understand all the instructions &
Warning labels.
! Extended exposure to weather could affect plastic colour.
! NEVER use the product on stairs or uneven surfaces. Incorrect use or placement of this product is
the most common mistake people make which can lead to serious injuries.
! DO NOT use on uneven, wet/slippery, or unsafe surfaces.
! NEVER use near stoves, heaters or other heat sources.
! DO NOT change, tamper with or modify any part of this product.
! DO NOT use this product if it is damaged in any way or has missing parts.
! DO NOT USE THIS PRODUCT AS A STEP STOOL OR LADDER.
! NEVER allow children to climb into the high chair unassisted.
! ALWAYS help child when getting into or out of the high chair.
! NEVER ALLOW CHILD TO USE FOOTREST TO CLIMB IN OR OUT OF HIGH CHAIR.
! DO NOT, EXCEPT AS DESCRIBED IN THESE INSTRUCTIONS, MODIFY THIS PRODUCT,
DISASSEMBLE ANY PART OR CHANGE THE WAY THE HARNESS BELTS ARE USED. This includes
adding any parts or accessories by other manufacturers as non tested accessories can affect the
safety of the product.
! Avoid putting heavy objects on unit.
! AVOID SERIOUS INJURY by keeping fingers away from any moving parts when
assembling/adjusting the product and when installing the tray, to prevent finger entrapment and
pinching injuries.
! WARNING: FAILURE TO PROPERLY READ, FOLLOW AND USE THESE INSTRUCTIONS AND THE
WARNING LABELS CAN CAUSE THE PRODUCT TO TIP OVER AND COULD RESULT IN SERIOUS
INJURIES TO YOUR CHILD.
! NEVER allow children to play with or climb into the high chair unassisted.
! NEVER allow children to hang onto the product.
! NEVER place/hang bags, purses, parcels, etc. or any accessory on the chair back, tray or any other
parts as it could cause the product to become unstable!
! NEVER allow children to stand on any part of this product.
If you experience any difficulties, please contact the Customer Service Department at
[e-mail]

X 3
PARTS LISTS
A – BASE
B – ROTATION POLE
C – METAL POLE
D – SEAT
E – 5 POINT HARNESS
F – SCREWS
G – TRAY
H – INSERT TRAY
I – FOOTREST
J – EVA FOAM PAD
TOOLS REQUIRED
-SCREWDRIVER (NOT INCLUDED)
! KEEP THESE INSTRUCTIONS
!READ ALL INSTRUCTIONS PRIOR TO
ASSEMBLY AND USE

Before assembly, remove the plastic pieces on each side of
the pole, and the plastic protective ring on the pole
Please note – Make sure the white plastic ring on the pole is firmly
pushed down each time the height has been adjusted.
HIGH CHAIR ASSEMBLY
1.Align Notch in bottom of metal pole with rotation button in
base.
2.While pressing the rotation button on base, push metal pole
downwards until fully inserted into base. Release button.
3.Lie assembly on its side and screw three (x3) screws with
washers into base to secure metal pole to the base.
!Ensure metal pole is locked into base by gently pulling up on it.
To remove: Unscrew three (x3) screws under base, press
rotation button to lift metal pole out of base.
4.Stand assembly upright and find the locking pin located at the
top of the metal pole. Press the locking pin while sliding seat
onto metal pole to lock into place.
5.Ensure locking pin locks in place through hole in seat base.
Gently pull up seat to ensure it is secured.
6. Attach footrest by sliding it up into opening on bottom of seat
base.
Ensure footrest is locked into place by gently pulling down.
PLEASE NOTE: THERE MAY BE A PLASTIC ORANGE/GREEN RING
ON THE POLE – THIS NEEDS TO BE REMOVED!
USING HIGHCHAIR
WARNING!
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN

This Highchair has TWO harness shoulder height positions. Choose
the position most suitable for your child.
TO ADJUST THE HARNESS:
Slide the 2 folded ends of the harness shoulder straps on the
backrest out through the seat.
TO INSTALL THE HARNESS:
Line up harness straps with openings on front of seat and turn each
folded end of the harness strap so it slides through the front end of
the seat. Ensure that each folded end of the harness strap is flush
against the back of the seat by gently pulling on the front of the
harness to ensure harness is locked in place.
SEAT HEIGHT ADJUSTMENT
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH.
WARNING
NEVER ADJUST THE SEAT WITH THE CHILD IN IT, THE

Please note – Make sure the white plastic ring on the pole is
firmly pushed down after the height has been adjusted.
INSERT TRAY
TO REMOVE INSERT TRAY:
Lift tab on back of insert tray and lift up.
TO INSTALL INSERT TRAY:
Snap tab into place on the main tray.

WARNING: Never leave a child unattended in this product.
Made in China
Bebe Style Ltd NW2BGwww.bebestyle.co.uk
USING TRAY
WARNING!
DEATH OR SERIOUS INJURY CAN OCCUR
NEVER USE THE HIGHCHAIR WITHOUT
THE TRAY T-BAR PROPERLY INSTALLED
WARNING! The child MUST be secured in the highchair at all
times by the harness system. The tray is NOT designed to hold
the child safely in the chair.
1. Locate both tabs on the tray. Tilt tray upwards and insert both
tabs into the holes on the seat armrest.
2. Tilt tray flat and push down on tray with both hands until a
‘click’ locks the tray in place. ENSURE TRAY IS SECURE BY GENTLY
PULLING UP ON IT.
--------------------------------
3. To remove tray: Using both hands gently bend-out tray sides,
tilt tray upwards and lift tray off the seat.
CARE AND MAINTENANCE
SEAT, METAL, PLASTIC, AND FABRIC PARTS:
Wipe clean using a damp cloth with mild soap and warm water. DO NOT machine wash.
! DO NOT use bleach, detergent or any harsh chemicals.
! DO NOT use an abrasive material as it may scratch the surface.
Insert tray is dishwasher safe (top rack only)
HARNESS:
The harness straps may be spot cleaned with a mild soap and warm water, and towel dried. DO
NOT immerse the harness into water. Doing so may weaken them.
Check your product from time to time for loose screws, worn parts, torn materials, etc. Tighten
replace or repair parts as needed.