Bedford WS 3 User manual

ASSEMBLY GUIDE
WS 3 Door Split Robe
IMPORTANT
Before commencing assembly:
•Follow all instructions COMPLETELY.
•Hardware kit contains small parts; keep out
of reach of children.
•Ensure all listed parts are present.
•Required tools to assemble:
Philips head screw driver, Battery Drill
& Spirit Level.
•Required assembly work surface should
be solid, level, clean and flat.
•Ensure all melamine edges are facing to the
front of the unit.
•Two person assembly required.
Customer Services Enquiries 1800 822 823
Controlled Document 9.2.4.11
Revision 5
TP05-151

A
x4
I
x4
H
x1
K
x50
L
x3
G
Repeat for all doors
B
E
E
c
Repeat for
other end
panel and
division
x12
J
C
x12
A
x16
B
x16
C
x4
D
x2
F
x24
E
x16
M
x6
N
C

Controlled Document 9.2.4.11
Revision 5
TP05-151

B
C
B
B
HH
M
II
B



Controlled Document 9.2.4.11
Revision 5
TP05-151

405mm 397mm 397mm
Door Gap
Adjustment Screw
Bedford Furniture is part of the Bedford Group. Bedford is a South Australian not-for-profit
organisation dedicated to enhancing the lives of people with a disability or disadvantage
through employment, training, residential services and life-skills.
It is strongly recomended to secure the unit to the wall, otherwise, it may tip forward when opened empty.
CAUTION
Ensure Cupboard is square before
nailing back panel on.
L
N
N
J
D
F
G
A
Controlled Document 9.2.4.11
Revision 5
TP05-151