BEEHIVE M59701 User manual


Note: Separate and idenfy parts before assembling. Nail sizes may vary due to availability.
Telescoping Cover
1 – Masonite
2 – Side Rails
2 – End Rails
1 – Metal Cover Pan


Inner Cover
2 – End Cleats
2 – Side Cleats
1 – Masonite (with hole)

1. Assemble Cleats around Masonite Panel
 
(See gure 2 for assembling Inner Cover)
Hive Body
2 – Sides
2 – Ends



1. Assemble Hive Body by interlocking
cutouts together.
      
hole of each corner.
     
corner holes.
(See gure 3 for assembling Hive Body)
End Cleat
Masonite
Side
Rail
Side
Rail
Figure 2
Figure 3


2. Set Masonite Panel in Frame (smooth side

side.
3. Place Metal Cover over Masonite and Rails

(See gure 1 for assembling Telescoping Cover)

End Rail
Side
Rail
Side
Rail
Metal Cover Pan Masonite
Side

End

End

Side



2 – End Bar










(See gure 5 for assembling Boom Board.)



2 – Side Rails




End Bar
Top Bar
Top Bar
End Bar
Top Cleat
Figure 4


Side Rail
Side Rail


separately

each corner.



into the GTB.

in each corner
Assemble Smoker to Bellows


Smoker & Bellows
Hive Tool
