3
EUROPOWER PMH518M
SPECIFICATIONS
MICROPHONEINPUTS
Type XLR, electronically balanced
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ωsource resistance -122 dB / -125 dB A-weighted
@ 50 Ωsource resistance -122 dB / -125 dB A-weighted
@ 150 Ωsource resistance -121 dB / -124 dB A-weighted
Frequency response < 10 Hz - 100 kHz (-1 dB),
< 10 Hz - 200 kHz (-3 dB)
Gain +33 dB, +8 dB with pad
Max. input level +12 dBu @ 10 dB gain
Impedance approx. 2.2 kΩbalanced,
1.1 kΩunbalanced
Signal-to-noise ratio 110 dB / 114 dB A-weighted
(-11 dBu in @ +33 dB gain)
Distortion(THD+N) 0.001% / 0.0008% A-weighted
MONO LINE INPUTS
Type 1/4" TRS connector, balanced
Impedance approx. 80 kΩbalanced,
40 kΩunbalanced
Max. input level +30 dBu
EQ
Low 80 Hz / ±15 dB
High 12 kHz / ±15 dB
MAIN MIX SYSTEM DATA
Noise
Main mix @ -oo,
Channel fader -oo -106 dB / -110 dB A-weighted
Main mix @ 0 dB,
Channel fader -oo -87 dB / -90 dB A-weighted
Main Mix @ 0 dB,
Channel fader @ 0 dB -80 dB / -82 dB A-weighted
LOUDSPEAKEROUTPUTS
Type Neutrik®Speakon®-compatible,
1/4" TS connectors
Load impedance 4 - 16 Ω
DSP
Converter 24-bitSigma-Delta,
Samplingrate 40 kHz
DISPLAY
Type 2-digit, 7-segment LED
AMPLIFIER
Output power @ 4 Ω1 x 180 W
Output power @ 8 Ω1 x 100 W
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
illustrated.
POWERSUPPLY
Mains voltages U.S./Canada
120 V~, 60 Hz
China/Korea
220 V~, 50 Hz
Europe/U.K./Australia
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
General export model
120/230 V~, 50 - 60 Hz
Power consumption max. 290 W
Fuse 100 - 120 V~: T 6.3 A H 250 V
220 - 240 V~: T 3.15 A H 250 V
Mains connection Standard IEC receptacle
PHYSICAL/WEIGHT
Dimensions (H x W x D) approx. 4 3/5" (117 mm)
x 18 1/2" (470 mm)
x 8 9/8" (225 mm)
Weight (net) approx. 15.88 lbs (7.2 kg)
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of
printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered
trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER®nor affiliation of the
trademark owners with BEHRINGER®. BEHRINGER®accepts no liability for any loss which may be suffered by any person who relies
either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly
from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER®and
have absolutely no authority to bind BEHRINGER®by any express or implied undertaking or representation. No part of this manual may
be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any
kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER®is a
registered trademark.
ALLRIGHTSRESERVED.©2006BEHRINGER Spezielle StudiotechnikGmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
