Behringer Ultragain Pro MIC2200 User manual

ULTRAGAIN® PRO MIC2200
www.behringer.com
Version 1.1 May 2000
Technical Specifications
ENGLISH

2
MIC2200
ULTRAGAIN PRO
Ultra-low noise discrete Microphone/Line Preamplifier
sMic input stages are based on super-high quality, discrete conjugate transistor pair circuitry
sUltra-wide bandwidth from 2 Hz to 200 kHz for “open” sound
sBuilt-inhigh-qualityvacuumtubeforoutstanding,ultra-musicaltubesound
sOur special vacuum tube circuitry warms up your music without unwanted noise
sTwo high-end Parametric EQs with centre frequency, bandwidth and level being fully user adjustable
sIndependent line driver to convert -10 dBV into +4 dBu pro level
sCompletelyversatileDI-Boxduetoservo-balancedinputsandoutputs
s“Soft Mute” +48 V Phantom Power to avoid power-on “thumps”
sFully tunable and switchable 12 dB high-pass filter
sSwitchablePhaseReversetocorrectphaseproblems
sUltra-lownoise4580audiooperationalamplifiersforoutstandingsoundperformance
sAccurate12-segmentLEDmeteringforoutputlevel
sServo-balancedgold-platedXLRand1/4"TRSinputsandoutputs
sRelay-controlledinputswitchformaximumsignalintegrity
sHigh-qualitydetentedpotentiometersandilluminatedswitches
sManufacturedunder the stringent ISO9000 management system

3
SPECIFICATIONS
AUDIO INPUT
Microphone
Connectors XLR
Type transformerless,DC-decoupled input
Impedance 3 k Ohmsbalanced
Maximuminputlevel +10 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1 kHz
Line Connectors XLR and 1/4" jack
Type transformerless,DC-decoupled input
Impedance 60kOhms balanced
Maximuminputlevel +23 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1kHz
AUDIO OUTPUT
Connectors XLR and 1/4" jack
Type electronicallyservo-balanced output stage
Impedance 60 Ohms balanced, 30 Ohm unbalanced
Maximumoutputlevel +21 dBu balanced and unbalanced
SYSTEMSPECIFICATIONS
Frequencyresponse 10 Hz to 200 kHz, +/- 3 dB
Noise > 94 dBu, unweighted, 22 Hz to 22 kHz
THD 0.011 % typ. @ +4 dBu, 1 kHz, Gain 1
IMD 0.01 % typ. SMPTE
Crosstalk < -88 dB, 22 Hz to 22 kHz
FUNCTION CONTROLS
Mic gain variable (+10 dB to +60 dB)
Frequency(lo cut) variable (12 to320Hz)
Frequency(PEQ) variable (10 Hz to 20 kHz), dependent on x 10 and x 0.1 switch
Bandwidth variable (0.03 to 2 octaves)
Level variable(-15 dB to +15 dB)
Output variable(-20 dB to +20 dB)
FUNCTION SWITCHES
+48 V activatesphantom power
Mic/line switchesfromline to mic preamplifier
Phaserev. phasereverse (180°)
Lo cut activatesthe high-passfilter
x 0.1 switches the frequency control to 10 Hz - 200 Hz
x 10 switches the frequency control to 1 kHz - 20 kHz
EQin/out activatesthe parametric filter
INDICATORS
Clip clippingcontrol LED
Outputlevel 12-segmentLEDdisplay:-30/-24/-18/-12/-6/-3/0/+3/+6/+9/+12/+18dB
functionswitch LED indicator of every switch
POWER SUPPLY
Mainsvoltages USA/Canada 120 V ~, 60 Hz
U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
Generalexportmodel 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
Powerconsumption max. 20 Watts
Fuse 100 - 120 V ~: T 500 mA H
200 - 240 V ~: T 250 mA H
Mains connection standard IEC receptacle
PHYSICAL
Dimension (H * W * D) app. 1 3/4" (44.5 mm) * 19" (482.6 mm) * 8 1/2" (217 mm)
Netweight app. 3.0 kg
Shippingweight app. 4.2 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

4
The information contained in this sheet is subject to change without notice. No part of this sheet may be reproduced or transmit-
ted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose,
without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGERandULTRAGAIN areregistered trademarks.ALL RIGHTSRESERVED.
©2000 BEHRINGERSpezielle StudiotechnikGmbH.
BEHRINGERSpezielle Studiotechnik GmbH,Hanns-Martin-Schleyer-Str.36-38, 47877Willich-Münchheide II, Germany
Tel. [phone] / 92 06-0, Fax [phone] / 92 06-30