Behringer V-Verb Pro REV2496 User manual

Version 1.0 November 2003
Technical Specifications
ENGLISH
V-VERB PRO REV2496

2
V-VERB PRO REV2496
REV2496
V-VERB PRO
Ultra High-Performance 24-Bit/96 kHz D al-Engine Reverb Modeler
sReference-class reverb modeling processor with high-qualit 24-bit/96 kHz A/D and D/A converters
sFull 4-channel operation up to 96 kHz without an limitations, providing two separate effects processors
in one unit
s8 high-end reverb algorithms, modeled after world-class reverb processors
sAdditional high-qualit modulation effects from X-over Dela to Chorus/Flanger plus stereo Compressor
sFull-featured digital interface with AES/EBU In/Out, optical S/PDIF In/Out, Wordclock In and MIDI function
for flexible use with digital equipment
sUltra high-resolution SHARC® processor with 32-bit internal signal processing for ultimate sonic resolution
s10 different routing t pes for flexible assignment of analog and digital connectors to both stereo engines
sInnovative user interface with soft push/turn encoders, big preset wheel, high-resolution graphic
LCD displa and additional TAP button for dela times
sDirect access to 4 effect parameters makes editing eas and comfortable
sIntuitive editing of up to 30 parameters using speciall designed graphic mode
sSeparate ROM and user preset banks with 400 presets total
sBalanced inputs and servo-balanced outputs with gold-plated XLR and ¼ TRS connectors
sOpen architecture allows future software updates via MIDI
sInternal switch-mode power suppl for maximum flexibilit (100 - 240 V~), noise-free audio, superior
transient response plus lowest possible power consumption for energ saving
sUltra-rugged construction ensures long life, even under most demanding conditions
sDesigned in German . Manufactured under ISO9000 certified management s stem

3
V-VERB PRO REV2496
SPECIFICATIONS
ANALOG INPUTS
Type XLR balanced
1/4" TRS stereo balanced
Impedance approx. 22 kΩ balanced
Max. inp t level +16 dB
CMRR typ. 40 dB
ANALOG OUTPUTS
Type XLR, servo-balanced
1/4" TRS stereo servo-balanced
Impedance approx. 100 Ω balanced
Max. o tp t level +16 dB
SYSTEM SPECIFICATIONS
Freq ency range <10 Hz - 20 kHz @ 44.1 kHz
<10 Hz - 22 kHz @ 48 kHz
<10 Hz - 46 kHz @ 96 kHz
Signal-to-noise ratio -90 dB
Dynamic range 106 dB (analog in ß analog o t)
THD 0,007% typ. @ +4dB , 1 kHz, Gain 1
Crosstalk < -100 dB (analog in ßanalog o t)
Signal delay < 1 ms (analog in ß analog o t)
DIGITAL INPUT 1
Type XLR servo-balanced
Standard AES/EBU or S/PDIF
inp t impedance 110 Ω
nominal inp t level 0.2 - 5 V peak-to-peak
DIGITAL INPUT 2
Type TOSLINK optical
Standard AES/EBU or S/PDIF
DIGITAL OUTPUT 1
Type XLR servo-balanced
Standard AES/EBU or S/PDIF
DIGITAL OUTPUT 2
Type TOSLINK optical
Standard AES/EBU or S/PDIF
SYNC INPUT
Type BNC
Standard Wordclock (1 x sample rate)
inp t impedance approx. 50 kΩ
Nom. level 2 - 6 V peak-to-peak
MIDI Interface
Type 5-pin DIN jacks In/O t/Thr
Implementation cf. MIDI implementation chart
DIGITAL PROCESSING
Processor high-resol tion SHARC® DSP, 600 MFLOPs, 32-bit internal signal processing
Converter 24 Bit/96 kHz
Sample rate external, 44.1 kHz, 48 kHz, 96 kHz
DISPLAY
Type 128 x 64 backlit liq id crystal display (green) with adj stable contrast
MEMORY
Presets 100 ROM + 100 ser presets for engines A and B, 100 ROM + 100 ser presets for combinations
POWER SUPPLY
Mains voltage 85  250 V~, 50  60 Hz
Power cons mption 10 W typ.
F se T 1 A H
Mains connector Standard receptacle
DIMENSIONS/WEIGHT
Dimensions 19" (482.6 mm) x 1 ¾" (44.5 mm) x 8 ½" (217 mm)
Weight approx. 4 ¾" lbs. (2.15 kg)
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus the
specifications and design of the device may differ from the information given in this manual.

4
V-VERB PRO REV2496
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing.
SHARC® as well as the names of companies institutions or publications pictured or mentioned and their respective logos are registered trademarks
of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with
BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any
description photograph or statement contained herein. Colors and specifications depicted may vary slightly from product. No part of this book may
be reproduced or transmitted in any form or by any means electronic or mechanical including photocopying and recording of any kind for any
purpose without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED.
© 2003 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH Hanns-Martin-Schleyer-Str. 36-38
47877 Willich-Münchheide II Germany
Tel. [phone] Fax [phone]