Behringer MicroHD HD400 User manual

BEHRINGER MicroHD HD400
WELCOME TO BEHRINGER
Thank you for showing your confidence in us by purchasing the
BEHRINGER MicroHD HD4 .
You can use this versatile, high-quality Hum Destroyer to:
seliminate AC hum,
sbreak ground loops,
sconvert back and forth between unbalanced and balanced
signals.
To ensure excellent signal transmission at all times, the HD4
should be used in every setup.
CONNECTORS
HA400 connectors
Both inputs of the HD4 , INPUT 1 and INPUT 2 are laid out as
1/4" TRS connectors.
Both outputs of the HD4 , OUTPUT 1 and OUTPUT 2 are laid
out as 1/4" TRS connectors.
SERIAL NUMBER. The serial number of the HD4 is located at the
bottom.
+The HD400 is a passive device. Therefore, no power supply
is needed.
APPLICATIONS
The following figure shows an example of how to use the MicroHD
HD4 .
Example HD400 wiring
WARRANTY
For our current warranty terms, please refer to our website at
http://www.behringer.com.
Die deutsche Anleitung ist erhältlich @ www.behringer.com
Manuel francophone en téléchargement sur www.behringer.com
Manual en español disponible en www.behringer.com
Manuali italiani disponibili @ www.behringer.com
Русскоязычное руководство @ www.behringer.com
Polskainstrukcjadostêpnajestpodadresem@www.behringer.com
Nederlandse handleiding beschikbaar @ www.behringer.com
Suomenkielinen kä ttöohje saatavilla osoitteesta www.behringer.com
Svensk manual finns tillgänglig på www.behringer.com
Dansk vejledning findes på @ www.behringer.com
Manual português disponível @ www.behringer.com
Åëëçíéêü åã÷åéñßäéï õðÜñ÷åé äéáèÝóéìï óôç äéåýèõíóç www.behr nger.com
Get user manuals: See SafeManuals.com

BEHRINGER MicroHD HD400
SPECIFICATIONS
NPUTS
Type 1/4" TRS connector, balanced
Impedance approx. 5 Ω
OUTPUTS
Type 1/4" TRS connector, balanced
Impedance approx. 6 Ω
D MENS ONS/WE GHT
Dimensions (H x D x W) approx.1 1/4" x 2 1/4" x 4 1/16"
(approx. 32 mm x 57.2 mm x 1 3.6 mm)
Weight approx. .36 lbs (18 g)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result
of these efforts, modifications may be made from time to time to e isting products without prior
notice. Specifications and appearance may differ from those listed or illustrated.
SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Install in accordance with the manufacturers instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Only use attachments/accessories specified by the manufacturer.
10) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
11) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been e posed to rain or
moisture, does not operate normally, or has been dropped.
INSTRUCCIONES DE SEGURIDAD
1) Lea las instrucciones.
2) Conserve estas instrucciones.
3) Preste atención a todas las advertencias.
4) Siga todas las instrucciones.
5) No use este aparato cerca del agua.
6) Limpie este aparato con un paño seco.
7) No instale el equipo cerca de fuentes de calor.
8) Use únicamente los dispositivos o accesorios especificados por el fabricante.
9) Confíe las reparaciones únicamente a servicios técnicos cualificados. Se requiere
mantenimiento siempre que la unidad haya sufrido algún daño.
УКАЗАНИЯПО ТЕХНИКЕ БЕЗОПАСНОСТИ
1) Прочитайте эти указания.
2) Сохраните эти указания.
3) Выполняйте эти указания.
4) Следуйте всем инструкциям по обслуживанию.
5) Не пользуйтесь прибором в непосредственной близости от воды.
6) Протирайте прибор сухой тряпкой.
7) Не располагайте прибор рядом с источниками тепла.
8) Применяйте только рекомендованные производи-телем дополнительные приборы/
принадлежности.
9) Поручайте выполнение работ по обслуживанию прибора только квалифицированному
персоналу сервисной службы.Техническое обслуживание требуется если прибор был
каким-то образом поврежден.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names of
companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither
constitutes a claim of the trademarks b BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER® accepts no liabilit for an
loss which ma be suffered b an person who relies either wholl or in part upon an description, photograph or statement contained herein. Colours and
specification ma var slightl from product. Products are sold through our authorised dealers onl . Distributors and dealers are not agents of BEHRINGER®
and have absolutel no authorit to bind BEHRINGER® b an express or implied undertaking or representation. No part of this manual ma be reproduced
or transmitted in an form or b an means, electronic or mechanical, including photocop ing and recording of an kind, for an purpose, without the express
written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED © 2005 BEHRINGER Spezielle Studiotechnik GmbH,
Hanns-Martin-Schle er-Str. 36-38, 47877 Willich-Münchheide II, German .
Tel. [phone], Fax [phone]
РУССКИЙ ESPAÑOL
ENGLISH
Get user manuals: See SafeManuals.com