Belkin SOUNDFORM Rise User manual

Audio Playback
Control Left Earbud Right Earbud
Volume up ( + ) Tap one time
Volume down ( - ) Tap one time
Pause / Resume playback Tap two times Tap two times
Next track Tap three times
Previous track Tap three times
Call Handling
Control Left Earbud Right Earbud
Accept / End call Tap two times Tap two times
Reject call Hold for 2 seconds Hold for 2 seconds
Virtual Assistants
Control Left Earbud Right Earbud
Activate virtual assistant Hold for 2 seconds Hold for 2 seconds
How to use the touch controls on the SOUNDFORM Rise
True Wireless Earbuds
All Day Comfort
Our True Wireless Earbuds come with
three sizes (S/M/L) of silicone ear tips,
providing all-day comfort and noise
isolation with its sealed in-ear fit.
3 sec
Initial pairing
Step 1: Open the charging case of your earbuds, and the earbud’s
white light will begin to blink. The blue light will show once the
earbuds are ready to pair.
Step 2: On your mobile device, turn ON the Bluetooth to begin
searching for nearby devices.
NOTE: The steps in enabling your Bluetooth may vary depending
on your device’s operating system.
Step 3: When your earbuds are detected, it will show as
SOUNDFORM Rise as a device to pair.
Tap on the name to complete the pairing.
Manual pairing
Remove the earbuds from the case. Then, press and hold the touch-
sensitive buttons on the earbuds for 3 seconds. The status light on
the earbuds will blink white and blue when they are ready to be paired.
B
SOUNDFORM
Rise
A
S
M
L

6 sec
How to charge the case
and the earbuds
Case: The SOUNDFORM Rise case can be
charged wirelessly using a standard
Qi wireless charging pad or via the USB-C
port on the back of the case.
Earbuds: The SOUNDFORM Rise earbuds
can be charged by placing them in the
charging case. They can either charge
directly from the battery in the case or can
be charged while also charging the case.
True Wireless Earbuds
How to reset the SOUNDFORM Rise True Wireless Earbuds