Belkin F5D5230U4-V1.20.003 Instruction Manual

RELEASE NOTE
RELEASE NOTE FOR ROUTER F5D5230z4, FIRMWARE 1.20.002
DATE: SEPTEMBER 15, 2002
NOVEMBER 31, 2001 CONFIDENTIAL PAGE 1OF 3
These release notes describe features and caveats. The main code module for this release is compatible and
downloadable into the switch over the network using the TFTP protocol. Please refer to the Installation and User
Guide for a detailed description of the download procedure.
Refer to the Belkin User Guide for information about using the embedded web management capability of the
switch.
This version of software F5D5230z4-v1.20.003-runtime.bin supports the following models of the F5D5230-x
product family:
•F5D5230z4
RESOLVED ISSUES
1. PPPoE idle time page can’t display when pressed advance button in PPPoE setting page
PRE-RESOLVED ISSUES
V 1.20.002
2. Virtual server of Netmeeting does not work.
3. Increase setup convenience to setup other settings without necessarily indicating wan mode
parameters.
V 1.20.001
1. After restore factory defaults, as long as dhcp client gets ip, system crashes
V 1.20.000
4. EZ-Install API : Commit status wrong.
The commit status packets do not indicate errors correctly. Instead of the status code appearing at offset
6 it appears at offset 7 of the packet. Offset 6 is always zero.
5. EZ-Install API : The WAN MAC address should always be set regardless of the addressing or
authentication mode.
6. EZ-Install API : No port close after 10 min.
7. Porting from F5D5230-4 V1.20.002.
PRE-RESOLVED ISSUES
LIMITATION & RESTRICTIONS:
APPROVED BY:
Submitted By: Date

RELEASE NOTES SOFTWARE RELEASE 1.11
BELKIN COMPONENTS, INC.
NOVEMBER 31, 2001 BELKIN CONFIDENTIAL PAGE 2OF 3
Product Manager
Date
Technical Support
Date
There are 2 types of firmware release, formal and engineering beta test version.
Formal version:
X.Y0 X: number from 1, Y: 0 - 9
Example: V1.00, and V1.10
Engineering Beta and Test version:
X.YZE X: number from 0, Y: 0 – 9 Z: 0 - 9
Example: V0.01E, V1.02E, or V1.14E