Belkin SURF N300 User manual

User Manual
F9K1004v1 8820-01044 Rev. A00
HigH Performance Wireless n300 VPn
ROUTER

TABLE OF CONTENTS
System ................................................. 27
Status .....................................................27
LAN .......................................................31
DHCP......................................................35
Schedule...................................................38
Log........................................................40
Language ..................................................41
Internet ................................................. 42
Status .....................................................42
Dynamic IP Address .........................................43
Static IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
PPP over Ethernet (PPPOE)...................................45
Point-to-Point Tunneling Protocol (PPTP)........................47
Layer-2 Tunneling Protocol (L2TP) .............................49
Wireless ................................................ 51
Basic ......................................................51
Advanced ..................................................54
Security....................................................56
Filter.......................................................62
Wi-Fi Protected Setup (WPS)..................................64
Client List ..................................................67
Policy......................................................68
Introduction… .............................................1
Package Contents ............................................ 1
System Requirements......................................... 1
Introduction.................................................. 2
LED Overview................................................ 3
Before you Begin ..........................................4
Considerations for Wireless Installation .......................... 4
Computer Settings (Windows XP/Windows Vista/Windows 7) ....... 5
Hardware Installation......................................... 10
Configuring your Router ...................................11
Setup Wizard .............................................12
VPN Wizard ............................................. 26

TABLE OF CONTENTS
Firewall ................................................ 69
Enable .....................................................69
Advanced ..................................................69
DMZ.......................................................70
Denial of Service (DoS).......................................70
MAC Filter ..................................................71
IP Filter ....................................................72
URL Filter ..................................................73
Advanced ............................................... 74
Network Address Translation (NAT) ............................74
Port Mapping ...............................................75
Port Forwarding .............................................76
Port Trigger.................................................77
Application Layer Gateway (ALG) ..............................78
Universal Plug and Play (UPnP)................................79
Quality of Service (QoS) ......................................80
Routing ....................................................83
VPN .................................................... 85
Status .....................................................86
Profile Setting...............................................87
IPSec ....................................................88
L2TP over IPSec...........................................94
L2TP.....................................................95
User Setting ................................................98
Wizard .....................................................99
Tools .................................................. 118
Admin ....................................................118
Time......................................................119
Dynamic DNS (DDNS) ......................................120
Power.....................................................122
Diagnosis .................................................123
Firmware ..................................................124
Back-up ...................................................125
Reset .....................................................126
Technical Support, Warranty, FCC Statement .............. 127

1
INTRODUCTION
Package Contents
• Belkin Wireless N300 VPN Router
• Power Adapter
• RJ-45 Ethernet LAN Cable
• CD-ROM with User Manual and Setup Wizard
• Quick Guide
System Requirements
• RJ-45 Ethernet Based Internet (ADSL or Cable Modem)
• Computer with Wireless Network function
• Windows, Mac OS or Linux based operating systems
• Internet Explorer or Firefox or Safari Web-Browser Software

2
INTRODUCTION
Introduction
F9K1004 is a Wireless 11N Gigabit VPN Router with 2
attachable antennas that delivers up to 6x faster speeds and
3x extended coverage than 802.11g devices. F9K1004 supports
various network with superior throughput and performance and
unparalleled wireless range. With its WPS function, it helps users
to connect their wireless devices with just a push of a button.
There’s also a built-in 4-port full-duplex 10/100/1000 Fast
Switch to connect your wired Ethernet devices together. The
Router function ties it all together and lets your whole network
share a high-speed cable or DSL Internet connection.

3
INTRODUCTION
LED Lights Icon Description
Wireless LAN
Color – Blue
Ligh ts when Wireless signal is activated.
Internet WAN
Color – Blue
LAN LAN
Color – Blue
Ligh ts when wired network device is conne cted to RJ-45 port.
Blinks when data transfer occ urs on RJ-45 port.
Power
Color – Oran ge
Ligh ts when device is powered ON.
Blinks device is Reset.
Blinks when Wireless data transfer and blinks when WPS handshake is initialized.
Steady light-up when ethernet port is plugged in.
Blinks when data transfer.

4
BEFORE YOU BEGIN
Before you Begin
This section will guide you through the installation process.
Placement of the F9K1004 is very important to avoid poor
signal reception and performance. Avoid placing the device
in enclosed spaces such as a closet or cabinet..
Considerations for Wireless Installation
The operating distance of all wireless devices cannot be pre-
determined due to a number of unknown obstacles in the
environment that the device is placed. These could be the
number, thickness and location of walls, ceilings or other objects
that the wireless signals must pass through. Here are some key
guidelines to ensure that you have the optimal wireless range.
1. Keep the number of walls and ceilings between the Belkin
access point and other network devices to a minimum.
Each wall or ceiling can reduce the signal strength; the
degradation depends on the building’s material.
2. Building materials makes a difference. A solid metal door or
aluminum stubs may have a significant negative effect on
range. Position your wireless devices carefully so the signal
can pass through drywall or open doorways. Materials such
as glass, steel, metal, concrete, water (fish tanks), mirrors, file
cabinets and brick will also degrade your wireless signal.
3. Interference can also come from other electrical devices
or appliances that generate RF noise. The most
common types are microwaves or cordless phones.

5
BEFORE YOU BEGIN
• Click Start button and open Control Panel.
Computer Settings (Windows XP/Windows Vista/Windows 7)
Windows XP Windows Vista Windows 7

6
BEFORE YOU BEGIN
• Windows XP, click [Network Connection]
• Windows Vista, click [View Network Status and Tasks] then [Manage Network Connections]
• Windows 7, click [View Network Status and Tasks] then [Change adapter settings]

7
BEFORE YOU BEGIN
• Right click on [Local Area Connection] and select [Properties].

8
BEFORE YOU BEGIN
• Check “Client for Microsoft Networks”, “File and Printer
Sharing for Microsoft Networks”, and “Internet Protocol
(TCP/IP) is ticked. If not, please install them.
• Select “Internet Protocol (TCP/IP)” and click [Properties]

9
BEFORE YOU BEGIN
• Select “Obtain an IP Address automatically” and “Obtain
DNS server address automatically” then click [OK].

10
BEFORE YOU BEGIN
Hardware Installation
1. Place the unit in an appropriate location
after conducting a site survey.
2. Plug one end of the Ethernet cable into the LAN port of
the device and another end into your PC/Notebook.
3. Plug one end of another Ethernet cable to WAN port of the
device and the other end into you cable/DSL modem (Internet)
4. Insert the DC-inlet of the power adapter into the port labeled
“DC-IN” and the other end into the power outlet on the wall.
This diagram depicts the hardware configuration:

11
CONFIGURING YOUR ROUTER
This section will show you how to configure the device
using the web-based configuration interface.
Please use your wireless network adapter to
connect the WIRELESS ROUTER.
Note: xxx represented in the wireless SSID above is the last 3
characters (lowercase) of your device WLAN MAC Address. This
can be found on the device ID label and is unique for each device.
Default Settings
IP Address 192.168.2.1
Username / Password admin / admin
Wireless Mode Enable
Wireless SSID belkin.xxx
Wireless Security None

12
SETUP WIZARD
1. Open a web browser (Internet Explorer/Firefox/Safari)
and enter the IP Address http://192.168.2.1
Note: If you have changed the default LAN IP Address of the
WIRELESS ROUTER, ensure you enter the correct IP Address.
2. The default username and password are admin. Once you
have entered the correct username and password, click the
OK button to open the web-base configuration page.

13
SETUP WIZARD
3. You will see this webpage if login is successful. 4. Click Wizard to enter the Setup Wizard.
Then click Next to begin the wizard.

14
SETUP WIZARD
5. Select the Operation Mode.
Please ensure you have the proper cables connected
as described in the Hardware Installation section.

15
SETUP WIZARD
a. The device will search for the correct Internet settings automatically. b. The most appropriate WAN type will be determined and
selected automatically. If it is incorrect, please select
Others to set up the WAN settings manually.
AP Router Mode

16
SETUP WIZARD
c. There are many WAN service types available. Please obtain
the correct settings from your Internet Service Provider (ISP).

17
SETUP WIZARD
Static IP Address
If your ISP Provider has assigned you a fixed IP address, enter the
assigned IP address, Subnet mask, Default Gateway IP address, and
Primary DNS and Secondary DNS (if available) of your ISP provider.