Belkin GO N300 DB User manual

User Manual
F9K1107 8820nt00920uk Rev.A00
WIRELESS DUAL BAND TRAVEL ROUTER
GO N300 DB
ENGLISH

TABLE OF CONTENTS
Getting Started ...........................................1
What’s in the Box.............................................1
Initial Setup..................................................1
Manual Setup Using Your Browser ..............................3
Getting to Know Your Router ...............................4
Front Panel ..................................................4
Back Panel ..................................................5
Technical Details ........................................6
Technical Features ...........................................6
System Requirements.........................................6
Using Your Router ........................................7
Opening the Router Firmware’s Web Interface ....................7
Updating the Router’s Firmware via the Web Interface .............7
Resetting the Router ..........................................9
Restoring the Router to Default Settings Using the Web Interface ..10
Troubleshooting, Support, and Warranty ...................12
Troubleshooting.............................................12
Belkin International, Inc., Limited 2-Year Product Warranty.........16
Regulatory Information ...................................18
FCC Statement..............................................18
European Compliance Statement:..............................19
General Safety Information: ...................................19

1
GETTING STARTED
What’s in the Box
Wireless Dual-Band Travel Router
Carrying Case
Ethernet Cable
Power Supply with UK and EU adapters
CD with User Manual
In some regions, the Travel Router includes Plug Adapters
to support the various plug types in your region.
US: No plug adapters included
Initial Setup
1. Connect your Router to the Ethernet (network) connector in
your hotel room. (You may use either the cable provided by
the hotel or the cable provided with your Travel Router.)

2
GETTING STARTED
2. If you purchased your Travel Router in Europe or Asia, it shipped
with adapters for the various plug types in your region. Please
attach the appropriate plug type to the power adapter.
3. Connect the power adapter to the Travel
Router using the provided cable.

3
GETTING STARTED
4. Plug the power adapter into the wall to start up your Travel Router.
5. Connect your devices to your Wi-Fi®network. The Travel
Router ships with a predefined network name (SSID)
and password for each band (2.4GHz and 5GHz); this
information is on your Quick Installation Guide.
Manual Setup Using Your Browser
In your browser, type “http://router” (you do not need to type
in anything else such as “www”). Then press the Enter key. If
you’re still having trouble running the manual setup option, type
“192.168.2.1” into your browser (you do not need to type in anything
else such as “http://” or “www”). Then press the Enter key.

4
GETTING TO KNOW YOUR ROUTER
A) Status Light
Your Router’s status is shown by the light on the front.
Off: The Router is not plugged into a power source.
Blinking Blue: The Router is starting up.
Solid Blue: The Router is connected to the Internet.
Blinking Amber: The Router can’t detect the modem. Either the
modem is off, is not plugged into the Router, or is unresponsive.
Front Panel B) Wi-Fi Protected Setup (WPS) Light and Button
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers. To use
the WPS feature on your Router, refer to the Router’s web
interface. The small light near the WPS button shows what is
happening while you are using WPS to establish a connection.
Off: Idle
Blinking Blue: The Router is listening for a WPS-enabled
computer or other device.
Solid Blue: The Router has made a secure connection with
the computer or other device.
Amber: A connection was not created.
A
B

5
GETTING TO KNOW YOUR ROUTER
Reset Button
There is a reset button on the bottom of the Router, which can
be depressed using a paper clip or other small object.
You may use this button if you need to reset the Travel Router for
some reason. See the Troubleshooting section for more details.
A) WAN Connector
Connect your hotel Internet connection to this port using the Ethernet
cable provided by the hotel or the cable included with your Router.
B) USB Power Port
This port is for the power supply.
Back Panel
A
B

6
TECHNICAL DETAILS
System Requirements
• BroadbandInternetservicewithRJ45Ethernetconnection
• Atleastonecomputerwith:
Installed wireless network interface card and TCP/IP protocol
Windows®XP 32 (SP3 or greater), Windows Vista®32/64,
or Windows 7®32/64; or Mac OS®X v10.5 or v10.6
Internet Explorer®v7 or above, Firefox®,
Google Chrome™, or Safari®
Minimum 1.8GHz processor
Minimum 512MB RAM
Technical Features
Wireless Standards with Link Rate:
• IEEE802.11n(upto150Mbps*)
• IEEE802.11g(upto54Mbps*)
• IEEE802.11a(upto54Mbps*)
• IEEE802.11b(upto11Mbps*)
Wireless Operating Spectrum:
• SimultaneousDual-Band2.4GHzand5GHz
Wireless Security:
• Pre-configuredsecurity
• Wi-FiProtectedSetup™
• 256-bitWPA2®encryption
• 64/128-bitWEPencryption
VPN Support:
• PPTP
• IPSecpass-through
*Thestandardtransmissionrates—150Mbps(for2.4GHz
and5GHz),54Mbps,and11Mbps—arethephysical
data rates. Actual data throughput will be lower and may
depend on the mix of wireless products used.

7
Updating the Router’s Firmware
via the Web Interface
The following steps show you how to update your Router’s
firmware using its web interface. You do not need to be connected
to the Internet as this interface is built into the Router itself.
Setup steps:
1. Locate and download the firmware file from the Belkin
support site. (Type your part number into the search box in
the top right corner and look for “Firmware” in the title.)
2. Save the file to a location on your computer where
you can get to it easily, such as your desktop.
3. Connect the computer to your Router.
4. Open a web browser on the computer.
5. In the address bar of the web browser, type
“http://192.168.2.1” and press “Enter” on your keyboard.
6. Click “Login” in the upper right-hand corner of the page. The
Router does not ship with a password, so just click “Submit.”
USING YOUR ROUTER
Opening the Router Firmware’s Web Interface
In your browser, type “http://router” (you do not need to type
in anything else such as “www”). Then press the Enter key. If
you’re still having trouble running the manual setup option, type
“192.168.2.1” in your browser (you do not need to type in anything
else such as “http://” or “www”). Then press the Enter key.

8
USING YOUR ROUTER
9. Select the firmware file by left-clicking on it and then click
the “Open” button in the lower-right corner of the window.
This will take you back into the Router’s interface.
7. Click on “Firmware Update” toward the
bottom of the left-hand menu.
8
8. Click the “Browse” button toward the middle of the
screen to search for the file you saved previously.
Note: The firmware version in the image
below is depicted as an example.