Belkin VISION N1 User manual

WIRELESS MODEM ROUTER
Quick Installation Guide
Need help?
See the extended user manual
on the CD-rom or go to:
UK http://www.belkin.com/uk/support/
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
F5D8632uk4A
Network Status Display
Internet ADSL Router Wired Wireless Security
Your network’s name
Number of connected
wireless computers/devices
P75617uk
P75617uk_F5D8632uk4A_QIG.indd 1-2 1/29/08 3:11:33 PM

1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
routersetup
4
1 2 3 4
2
6
7
5
3
to power
DC 12V / 1.25A
to wired computers
ADSL port
Reset
Plug the power supply into a wall outlet.
Plug the other end into the black port on the Router.
Locate the cable that connects your old modem to the ADSL wall jack.
Unplug it from your old modem and then connect it to port labeled “ADSL
port” (Yellow Port) on the back of your N1 Vision Modem Router.
Connect the new networking RJ45 cable (provided in the
box) to any gray port on the back of the router.
Connect the other end of that cable to a networking
(Ethernet) port on your computer.
Rotate the antennas up.
Open a web browser on that computer. The Belkin Router Wizard
should appear automatically. If it doesn’t, enter “routersetup”
into the web-address field and press the “Enter” key.
N1
VISION modem router back of computer www
existing cable
new cable from package
P75617uk_F5D8632uk4A_QIG.indd 3-4 1/29/08 3:11:34 PM