Belkin F5U219 User manual

EN
FR
DE
NL
IT
ES
Belkin USB 2.0
3 Port PCI Card
Connect up to 3 devices for
ultrafast data transfers
F5U219User Manual

EN
Belkin USB 2.0
3 Port PCI Card
Connect up to 3 devices for
ultrafast data transfers
F5U219User Manual

6
Table of Contents
Introduction ...............................................................................................1
Overview .....................................................................................................2
Features ...............................................................................................2
Specifications ......................................................................................2
Package Contents ................................................................................2
System Requirements ..........................................................................2
USB 2.0 Dual-Port PCI Card Description ..............................................3
Operating System Compatibilit ................................................................3
Installation Procedure for Windows 98 SE OS ....................................4
Installation .................................................................................................4
Verifying Proper Installation (Windows 98/98 SE OS) ........................5
Installation Procedure for Windows 2000 OS ......................................6
Verifying Proper Installation (Windows 2000 OS) ................................7
Installation Procedure for Windows Me OS ..........................................8
Verifying Proper Installation (Windows Me OS) ..................................9
Installation Procedure for Windows XP OS ........................................10
Verifying Proper Installation (Windows XP OS) ..................................10
Information ...............................................................................................11

1
EN
Introduction
Welcome to Belkin USB 2.0!
Thank you for purchasing the Belkin USB 2.0 3 Port PCI Card (the PCI Card).
Now you can upgrade your computer to the latest USB technology. You will
be able to take advantage of a host of new high-speed USB 2.0 products!
Your USB 2.0 products—including hard drives, scanners, printers, video
cameras, and more—will all work much faster than ever before. Your current
USB devices will continue to work as they always have, and in some cases
even better with this PCI Card. Follow the simple installation instructions in
this manual to get your PCI Card up and working—then enjoy the speed and
convenience of USB!

2
EN
2
Overview
Features
• Three USB host controllers integrated into a single PCI Card—one
providing 480Mbps of USB bandwidth and two providing 12Mbps of USB
bandwidth
• 3 high-speed USB ports, 1 internal, 2 external
• Simultaneous connection capability for low-, full-, and high-speed devices
• Auto-detection of new devices as they are connected, along with the speed
of each device
• Backward-compatibility with USB 1.1 devices
• Full compliance with USB specifications
• Plug-and-Play technology
Specifications
• Open Host Controller Interface- (OHCI-) compliant (USB 1.1 Host Controller)
• EHCI-compliant (USB 2.0 Host Controller)
• PCI revision 2.1-compliant
• Current: 500mA per port
• USB revision 2.0-compliant
Package Contents
• Belkin USB 2.0 3 Port PCI Card
• User Manual
• Installation CD
System Requirements
• PC-compatible computer with available PCI slot
• Windows® 98 SE, 2000, Me, or XP operating system

3
3
EN
Operating System USB 1.x Support USB 2.0 Support
Windows 98 SE Yes Yes
Windows 2000 Yes Yes
Windows Me Yes Yes
Windows XP Yes Yes
USB 2.0 Dual-Port PCI Card Description
Operating System Compatibility

4
EN
4
Please refer to the section that corresponds to your version of the Windows
operating system (OS).
Installation Procedure for Windows 98 SE OS
This installation procedure will successfully install two USB 1.1 host
controllers and a single USB 2.0 enhanced host controller.
1. Ensure that your computer is powered down.
2. Locate an available PCI slot on your computer.
3. Insert the PCI Card into the slot. Apply enough pressure to ensure that it
is fully seated.
4. Insert the Belkin USB 2.0 driver installation CD into your computer’s CD-
ROM drive.
5. Turn on power and boot-up the computer.
6. The Windows OS will recognize the PCI Card as a “NEC USB Open Host
Controller” and the “Add New Hardware Wizard” dialog box will open.
Click “Next”.
7. Select “Search for the best driver for your device” and click “Next”.
8. Uncheck all the boxes and click “Next”.
9. The Windows OS will find the drivers for “NEC USB Open Host Controller”.
Click “Next”.
10. The Windows OS may ask you for the Windows OS installation CD.
If prompted to, insert the CD into the CD-ROM drive and follow the
subsequent instructions.
11. After the Windows OS installs the required drivers, installation of the first
host controller is complete. Click “Finish”.
12. The “Add New Hardware” wizard will repeat the installation process for
the second OHCI host controller.
13. Repeat steps 7-11.
14. After installation of the two OHCI host controllers, the Windows OS
will detect “PCI Universal Serial Bus”. This is the USB 2.0 EHCI host
controller.
15. The “Add New Hardware Wizard” dialog box will open. Click “Next”.
16. Select “Search for the best driver for your device” and click “Next”.
Installation

5
5
EN
Installation
17. Check the “CD-ROM drive” box. Click “Next”.
18. The Windows OS will locate the driver for “Belkin USB 2.0 Hi-Speed Host
Controller”. Click “Next”.
19. The Windows OS will now install the F5U219 enhanced host controller
driver. Click “Finish”.
20. After installation of the USB host controllers, the Windows OS will detect
“USB Root Hub” and automatically install the required driver support.
This will repeat for each of the two USB OHCI host controllers.
Installation of the PCI Card is now complete.
Verifying Proper Installation (Windows 98/98 SE OS)
Check the “Windows Device Manager” to confirm that your PCI Card has
been properly installed.
1. Right-click on “My Computer” and select “Properties”.
2. Select the “Device Manager” tab.
3. Click on the plus sign (+) next to “Universal Serial Bus Controllers”.
The “Device Manager” list will now include two “NEC USB Open Host
Controller” entries, one “Belkin USB 2.0 Hi-Speed Host Controller” entry,
and two additional “USB Root Hub” entries.

6
EN
Installation
6
Installation Procedure for Windows 2000 OS
This installation procedure will successfully install two USB OHCI host
controllers and a single USB 2.0 enhanced host controller.
1. Locate an available PCI slot on your computer.
2. Insert the PCI Card into the slot. Apply pressure as needed until it is fully
seated.
3. Insert the Belkin USB 2.0 driver installation CD into your computer’s CD-
ROM drive.
4. After installing the PCI Card, turn on the computer.
5. After loading, the Windows 2000 OS will detect “NEC PCI to USB Open
Host Controller”. The required driver support will be automatically
installed. No user input is required. This will repeat one more time.
6. The Windows OS will detect “Universal Serial Bus (USB) Controller”. This
is the USB 2.0 EHCI host controller. The “Found New Hardware Wizard”
window will appear. Select “Search for a suitable driver for my device
(recommended)” and click “Next”.
7. A new “Found New Hardware Wizard” window will open. Check the “CD-
ROM drive” box. Click “Next”.
8. The Windows OS will find “Belkin USB 2.0 Hi-Speed Host Controller”.
Click “Next”.
9. The Windows OS will now install the “Enhanced Host Controller” driver.
Click “Finish”.
10. Installation of the USB 2.0 Dual-Port PCI Card is now complete.

7
7
EN
Installation
Verifying Proper Installation (Windows 2000 OS)
After installation, check the Windows OS’s
Device Manager to confirm that the PCI Card has been installed.
1. Right-click on “My Computer”.
2. Select “Properties”.
3. Select the “Hardware” tab and click on the “Device Manager” button.
4. Click the plus sign (+) next to “Universal Serial Bus Controllers”.
The “Device Manager” list will now include two “NEC USB Open Host
Controller” entries, one “Belkin USB 2.0 Hi-Speed Host Controller” entry,
and two additional “USB Root Hub” entries.

8
EN
Installation
8
Installation Procedure for Windows Me OS
This installation procedure will successfully install two USB OHCI host
controllers and a single USB 2.0 enhanced host controller.
1. Locate an available PCI slot on your computer.
2. Insert the PCI Card into the slot. Apply pressure as needed until it is fully
seated.
3. Insert the Belkin USB 2.0 driver installation CD into your computer’s CD-
ROM drive.
4. After installing the PCI Card, turn on your computer.
5. After loading, the Windows OS will detect “NEC USB Open Host Controller
(E13+)”. The required driver support will be automatically installed. No
user input is required.
6. The Windows OS will detect “PCI Universal Serial Bus”. This is the USB
2.0 EHCI controller. The “Add New Hardware Wizard” window will appear.
7. Select “Automatic search for a better driver (recommended)”. Click “Next”.
8. Check the “CD-ROM Drives” box. Click “Next”.
9. The Windows OS will locate the driver for “Belkin USB 2.0 Hi-Speed USB
Host Controller”. Click “Next”.
10. The Windows OS will now install the “Belkin USB 2.0 Hi-Speed USB Host
Controller” driver. Click “Finish”.
11. The Windows OS will detect “NEC USB Open Host Controller (E13+)”. The
required driver support will be automatically installed. No user input is
required.
12. After installation of the USB host controllers, the Windows OS will detect
“USB Root Hub” and automatically install the required driver support.
This will repeat one more time. Installation of the PCI Card is now
complete.

9
9
EN
Installation
Verifying Proper Installation (Windows Me OS)
After installation, check the Windows OS’s Device Manager to confirm that
the PCI Card has been installed.
1. Right-click on “My Computer” and select “Properties”.
2. Select the “Device Manager” tab.
3. Click on the plus sign (+) next to “Universal Serial Bus Controllers”.
The “Device Manager” list will now include two “NEC USB Open
Host Controller (E13+)” entries, one “Belkin USB 2.0 Hi-Speed Host
Controller”entry, and two additional “USB Root Hub” entries.

10
EN
Installation
10
Installation Procedure for Windows XP OS
1. Locate an available PCI slot on your computer.
2. Insert the PCI Card into the slot. Apply pressure as needed until it is fully
seated.
3. Insert the Belkin USB 2.0 driver installation CD into your computer’s CD-
ROM drive.
4. After installing the PCI Card, turn on the computer.
5. After loading, the Windows XP OS will detect “NEC PCI to USB Open Host
Controller”. The required driver support will be automatically installed. No
user input is required. This will repeat one more time.
6. The Windows XP OS will detect “NEC PCI to USB Enhanced Host
Controller”. A “New Hardware Wizard” window will open. With the
installation CD in the drive, select “Next” to install the driver. The
Windows OS may display a message indicating that the driver that you
are installing has not passed “Windows Logo testing”. Click “Continue
Anyway”.
7. The Windows XP OS will detect “USB Root Hub”. The required driver
support will be automatically installed. This will repeat two times.
Installation is now complete.
Verifying Proper Installation (Windows XP OS)
After installation, check the Windows XP OS’s Device Manager to confirm
that the PCI Card has been installed.
1. Right-click on “My Computer”.
2. Select “Properties”.
3. Select the “Hardware” tab and click on the “Device Manager” button.
4. Click the plus sign (+) next to “Universal Serial Bus Controllers”. The
“Device Manager” list will now include two “NEC USB Open Host
Controller” entries, one “Belkin USB 2.0 Hi-Speed Host Controller” entry,
and two additional “USB Root Hub” entries.

11
11
EN
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES
FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare
under our sole responsibility that the product:
F5U219 to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
CE Declaration of Conformity
We, Belkin Corporation, declare under our sole responsibility that the F5U219, to
which this declaration relates, is in conformity with Generic Emissions Standard EN
55022:1998 Class B, EN50081-1 and with Generic Immunity Standard EN50082-1
1992.
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime.
If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided
it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin
dealer from whom you purchased the product. Proof of purchase may be required.
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or
misapplication; if the product has been modified without the written permission of Belkin; or if any
Belkin serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND
ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to
this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING
FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT
NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING OR
REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.
Information

Belkin Corporation
501 West Walnut Street
Compton, CA, 90220-5221, USA
[phone]
[phone] fax
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
[phone]
[phone] fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, Netherlands
[phone]
[phone] fax
Belkin GmbH
Hanebergstrasse 2
80637 Munich, Germany
[phone]
[phone] fax
Belkin SAS
130 rue de Silly
92100 Boulogne-Billancourt, France
[phone]
[phone] fax
Belkin Iberia
Avda. Cerro del Aguila 3
28700 San Sebastián de los Reyes, Spain
[phone]
[phone] fax
© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective
manufacturers listed. Mac OS and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and
other countries.
P75243ea
Please visit our website www.belkin.com for technical support or further information.
Disposal of Waste Equipment by Users in Private Households in the European Union:
For more information, go to www.belkin.com/environmental

FR
Belkin USB 2.0
Carte PCI à 3 ports
Connectez jusqu’à 3
périphériques pour un transfert
de données ultra-rapide
F5U219Manuel de l’utilisateur

Introduction ...............................................................................................1
Présentation ...............................................................................................2
Caractéristiques ...................................................................................2
Spécifications ......................................................................................2
Contenu de l’emballage .......................................................................2
Configuration requise ...........................................................................2
Systèmes d’exploitation compatibles .....................................................3
Description de la carte PCI à deux ports USB 2.0 ................................3
Installation .................................................................................................4
Procédure d’installation sous Windows 98 SE ....................................4
Vérification de l’installation (Windows 98/98 SE) ...............................5
Procédure d’installation sous Windows 2000 ......................................6
Vérification de l’installation (Windows 2000) .......................................7
Procédure d’installation sous Windows Me .........................................8
Vérification de l’installation (Windows Me) .........................................9
Procédure d’installation sous Windows XP ........................................ 10
Vérification de l’installation (Windows XP) .........................................10
Information ...............................................................................................11
14
Table des matières

1
FR
Introduction
Bienvenue dans le monde USB 2.0 de Belkin !
Merci d’avoir choisi la carte PCI à 3 ports USB 2.0 de Belkin (la carte PCI).
Vous pouvez maintenant mettre votre ordinateur à niveau avec la technologie
USB la plus récente et profiter d’un vaste choix de nouveaux produits USB
2.0 à haut débit ! Les produits USB 2.0, tels que disques durs, scanners,
imprimantes, caméras vidéo et autres, fonctionneront plus vite que jamais.
Vos appareils USB actuels continuerontde fonctionner comme par le passé
et, dans certains cas, foncxtionneront même mieux à l’aidede cette carte
PCI. Suivez la procédure d’installation simple fournie dans le présent manuel
pour pouvoir utiliser votre carte PCI, puis laissez-vous griser par le débit et la
facilité d’emploi de l’USB !

2
FR
2
Présentation
Caractéristiques
• Trois contrôleurs d’hôte USB intégrés dans une seule carte PCI : un fournit
une bande passante USB de 480 Mbps et deux de 12 Mbps.
• 3 ports USB à haut débit : 1 interne et 2 externes
• Possibilité de connexion simultanée de périphériques à faible, plein et haut
débit
• Détection automatique de nouveaux périphériques et de leur débit au fur et
à mesure de leur branchement
• Rétrocompatible avec les périphériques USB 1.1
• Entièrement conforme aux spécifications de l’USB
• Technologie Plug-and-Play
Spécifications
• Conforme à la norme OHCI Open Host Controller Interface (contrôleur
d’hôte USB 1.1)
• Conforme à la norme EHCI (contrôleur d’hôte USB 2.0)
• Conforme à la norme PCI, révision 2.1
• Intensité : 500 mA par port
• Conforme à la version USB 2.0
Contenu de l’emballage
• Carte PCI 3 ports USB 2.0 Belkin
• Manuel d’utilisation
• CD d’installation
Configuration requise
• PC compatible avec emplacement PCI libre
• Windows® 98 SE, 2000, Me, ou XP