Belkin F1DJ104P-B User manual

F1DJ102P-B
F1DJ104P-B
User Manual
Control up to four PS/2 computers
using one monitor, keyboard and mouse
KVM Switch
P74711uk_F1DJ10x_man.indd 1 12/11/04 11:33:46 am

Congratulations on your purchase of this Belkin KVM Switch (the Switch).
The diverse line of market-leading KVM solutions from Belkin exemplifies our
commitment to delivering high-quality, durable products at a competitive price.
Engineered to give you control over multiple computers and/or servers from
one console, Belkin KVM switches come in a variety of capacities suitable for all
configurations, large or small. This Switch is backed by a Belkin Three-Year Warranty
and free technical support.
This manual will provide you details about your new Switch, from installation
and operation, to troubleshooting—in the unlikely event of a problem.
For easy installation, please refer to the Quick Installation Guide included with
your Switch.
Thank you for purchasing the Belkin KVM Switch. We appreciate your business.
Package Contents
• KVM Switch
• User Manual
• Quick Installation Guide
• OmniView KVM Cable kits
INTRODUCTION
1
Introduction
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Overview
Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Unit Display Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation
Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Step-By-Step Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using Your Switch
Powering Up the Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
AutoScan Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
FAQs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
TABLE OF CONTENTS
P74711uk_F1DJ10x_man.indd 2-1 12/11/04 11:33:46 am

Equipment Requirements
Cables
For each PS/2 computer you plan to connect to the Switch, you will need one
VGA cable, one PS/2 keyboard cable, and one PS/2 mouse cable. Keyboard and
mouse cables must have PS/2 male-to-PS/2 male connectors.
To support resolutions of up to 1920x1440@65Hz and to preserve signal
integrity, use of a 75-Ohm coaxial VGA cable is required. Cables must have
HDDB15 female-to-HDDB15 male connectors.
Belkin OmniView KVM Cables offer the highest quality possible to ensure
that your data is optimally transmitted. KVM Cables include PC99 color-coded
connectors for easier identification and connection. Double-shielded,
strain-relief, ferrite-bead, E Series Cables include an industry-standard, 14-pin,
coaxial VGA cable and nickel-plated connectors for high-resolution applications.
The following cable kit is included and recommended for your KVM Switch:
F1D9000-XX OmniView E Series KVM Cable kit (PS/2 Style)
(-XX denotes the length in feet)
OVERVIEW
3
The Belkin KVM Switch allows you to control multiple computers with one keyboard,
monitor, and mouse. The Switch supports PS/2 input devices (keyboard and mouse),
VGA, SVGA, XGA, and PS/2 computers.
Feature Overview
Hot Keys
Hot keys allow you to select ports using designated key commands. Control multiple
computers using a simple hot key sequence on your keyboard.
AutoScan
The AutoScan feature allows you to automatically scan and monitor the activities
of all operating computers connected to your Switch one by one.
Video Resolution
With a 200MHz bandwidth, the Switch is able to support video resolutions of up
to 1920x1440@65Hz. To preserve signal integrity at high resolutions, 75-Ohm
coaxial VGA cabling is required.
Front-Panel Push Button
A push button conveniently located on the face of the Switch allows for simple,
manual port selection.
Light-Emitting Diode Display
LEDs on the front of the Switch function as status monitors. Positioned on either
side of the front-panel push button, the LEDs light to indicate which corresponding
monitor port is currently active.
OVERVIEW
2
P74711uk_F1DJ10x_man.indd 2-3 12/11/04 11:33:46 am

5
OVERVIEW
Port Status
Indicator LEDs
Front-Panel
Push Button
The 2-Port KVM Switch:
Console Keyboard
and Mouse Ports
DC Power Jack
Computer 2 Ports
Unit Display Diagrams
Console VGA Port
Computer 1 Ports
Operating Systems
Your Switch is for use on CPUs using:
Platforms
• Windows® 95, 98, 2000, Me, NT®, XP
• DOS
• Linux®
• Novell® NetWare® 4.x/5.x
Keyboards
• Supports 101-, 102-, and 104-key keyboards
Mice
• Microsoft® system-compatible PS/2 mice with 2, 3, 4, or 5 buttons
Monitors
• VGA
• SVGA
• MultiSync®
Optional Power Supply
An optional 9V, 600mA power supply is available. Visit belkin.com for
ordering information.
OVERVIEW
4
P74711uk_F1DJ10x_man.indd 4-5 12/11/04 11:33:46 am

Specifications
Part No.: F1DJ102P, F1DJ104P
Power: Optional 9V DC, 600mA adapter with center-pin positive polarity
PCs Supported: F1DJ102P: 2
F1DJ104P: 4
Keyboard Emulation: PS/2
Mouse Emulation: PS/2 and Serial (with use of adapter)
Monitors Supported: VGA, SVGA, MultiSync, and LCD (with use of adapter cable)
Max. Resolution: 1940x1440@65Hz
Keyboard Input: 6-pin miniDIN (PS/2)
Mouse Input: 6-pin miniDIN (PS/2)
VGA Port: 15-pin HDDB type
LED Indicators: F1DJ102P: 2
F1DJ104P: 4
Enclosure: Plastic
Dimensions: F1DJ102P: (L) 4.5 x (W) 3.0 x (H) 1.0 in.
F1DJ104P: (L) 7.5 x (W) 3.0 x (H) 1.0 in.
Weight: F1DJ102P: 3.2oz.
F1DJ104P: 6.4oz.
Warranty: 3 years
Note: Specifications are subject to change without notice.
7
OVERVIEW
6
OVERVIEW
Port Status
Indicator LEDs
Front-Panel
Push Button
The 4-Port KVM Switch:
Console Keyboard
and Mouse Ports
DC Power Jack
Computer 3 Ports
Computer 2 Ports
Console VGA Port
Computer 1 Ports
Computer 4 Ports
P74711uk_F1DJ10x_man.indd 6-7 12/11/04 11:33:47 am

Step-by-Step Installation Guide
This section provides complete instructions for the hardware setup of a
single Switch.
Important Note
Before attempting to connect anything to the Switch or to any computer, make
sure that everything is powered off. Plugging and unplugging cables while
computers are powered on can cause irreversible damage to your computers,
data, and/or to the Switch. Belkin Corporation will not be responsible for damage
caused in this way.
Connecting the Console
1. Connect your PS/2 type keyboard
and mouse to the KEYBOARD and
MOUSE ports located on the side
of your Switch.
9
INSTALLATION
INSTALLATION
8
Pre-Configuration
Where to Place the Switch
The Switch is designed for positioning on the desktop. The exact placement will
be based on the location of your CPUs and length of your cables.
Cable Distance Requirements
For PS/2 computers: VGA signals are best retained when transmitted up to 25
feet (7.6m). Beyond 25 feet, probability of video degradation increases with
an increase in distance. For this reason, your PS/2 computer should be placed
within 25 feet of the KVM Switch.
Note: If your computer needs to be more than 25 feet from the KVM Switch, you
can use the Belkin CAT5 Extender (part number F1D084) to extend your PS/2
keyboard, PS/2 mouse, and monitor up to 500 feet (152.4m) away using a
standard CAT5 UTP cable.
Cautions and Warnings
Avoid placing cables near fluorescent lights, air conditioning equipment, or
machines that create electrical noise (e.g., vacuum cleaners).
INSTALLATION
P74711uk_F1DJ10x_man.indd 8-9 12/11/04 11:33:47 am

Connecting the Computer:
3. Using an OmniView KVM Cable kit, take the VGA cable and connect the male
end of the cable to the VGA port on the first computer. Connect the female
end to the VGA 1 port on the side of the Switch.
11
INSTALLATION
2. Take the video cable that is attached to your monitor and connect it to the
VGA OUT port located on the side of the Switch.
10
INSTALLATION
P74711uk_F1DJ10x_man.indd 10-11 12/11/04 11:33:49 am

5. Connect one end of the PS/2 mouse KVM cable to the mouse port on your
computer and the other end to the MOUSE 1 port on the side of the Switch.
Repeat Steps 3 through 5 for each additional computer to be connected to
the Switch, connecting them to the corresponding CPU ports on the side.
13
INSTALLATION
4. Connect one end of the PS/2 keyboard KVM cable to the keyboard port on
the computer and the other end to the KEYBOARD 1 port on the side of
the Switch.
12
INSTALLATION
P74711uk_F1DJ10x_man.indd 12-13 12/11/04 11:33:52 am

You can switch directly to any port by entering the Switch port number you
wish to use. For example, if you press “SCROLL LOCK”, “SCROLL LOCK”, “2”, the
computer on port 2 will be selected.
AutoScan Mode
In AutoScan mode, the Switch remains on one port for eight seconds before
switching to the next. This time interval cannot be changed.
To enable AutoScan mode, press “SCROLL LOCK”, “SCROLL LOCK”, “S”.
Note: There is no mouse or keyboard control in this mode by design, in order
to prevent errors. If it were enabled, the user could move the mouse or use the
keyboard while the KVM Switch is switching to the next port. This could interrupt
communication between the computer and Switch that might cause erratic mouse
movement, or result in errant display of characters when using the keyboard.
To disable AutoScan mode, press the space bar.
15
USING YOUR SWITCH
++
Switch to Port 2—(02)
Powering Up the Systems
Once all cables have been connected, power up your CPUs that are attached
to the Switch. All computers can be powered on simultaneously. The Switch
emulates a mouse and keyboard on each port and will allow your computer to
boot normally. Your Switch should now be ready for use.
You can select which computer to operate by either the front-panel push button
located on the top of the Switch or through hot key commands. Note that it
will take 1-2 seconds for the video to display after switching. This is due to
the refresh of the video signal. A re-synchronization of the mouse and keyboard
signal also takes place. This is normal operation and ensures that proper
synchronization is established.
You can conveniently change ports on the Switch through a keyboard command
sequence using the “SCROLL LOCK” key and up and down arrow keys. To send
commands to the Switch, press the “SCROLL LOCK” key twice within two seconds.
You will hear a beep for confirmation. Then you can press the up or down arrow
keys to switch between ports.
14
USING YOUR SWITCH
Switch to next active port,
up arrow
Switch to previous active port,
down arrow
P74711uk_F1DJ10x_man.indd 14-15 12/11/04 11:33:55 am

17
Q: What is the maximum video resolution the Switch supports?
A: The advanced video circuit in the Switch supports a maximum resolution of
1940x1440@65Hz. This higher resolution support is ideal for graphic artists
and designers who depend on high-quality video.
Q: What video bandwidth does the KVM Switch support?
A: The Switch supports 200MHz of video bandwidth.
Q: What is the difference between the KVM Switch and the SOHO Series KVM
Switch?
A: The SOHO Series KVM Switch offers additional audio and microphone support;
a sculpted, space-saving design; cable management; flash-upgrade capability;
and a USB option.
Q: What are the benefits of the Belkin KVM Switch over a similar
competitor product?
A: The Belkin KVM Switch is an affordable solution, packed with features usually
found in higher-priced units. The Belkin KVM Switch offers hot key command
switching, resolution support of up to 1940x1440@65Hz, AutoScan, and a
Belkin Three-Year Limited Warranty—all at a very affordable price.
Q: Can I use the Switch on my Sun computer?
A: Yes, the Switch works with Sun computers when used with the Belkin Sun
Adapter, part number F1D082.
FAQs
16
Q: What operating system does the Switch support?
A: The Switch will support any operating system that runs on a PS/2 platform.
It will also work with Sun and Mac operating systems using the appropriate
adapters (Belkin OmniView Sun Adapter F1D082, OmniView Mac Adapter
F1D080). Operating systems include, but are not limited to, DOS, Windows 3.x,
95, 98, 2000, Me, NT, XP, Linux, and Novell NetWare 4.x/5.x.
Q: Does the Switch function with the Microsoft IntelliMouse?
A: Yes, the Switch will function with Microsoft, Logitech, Kensington, as well as
with all Belkin mice. The Switch will support only two mouse buttons. Please
contact Belkin Technical Support for any compatibility questions you may have.
Q: How does the Switch allow the user to toggle between ports?
A: The Switch supports two methods of port selection. The user can choose
computers using specially designated hot keys from the keyboard, or by
pressing the front-panel push button.
Q: How far can the user be from the Switch?
A: When using PS/2 connections, the Switch can be up to 25 feet away from
your computer. If your computer needs to be more than 25 feet from the KVM
Switch, you can use the Belkin CAT5 Extender (part number F1D084) to extend
the operation distance of your PS/2 keyboard, PS/2 mouse, and monitor up to
500 feet away using standard CAT5 UTP cable.
FAQs
P74711uk_F1DJ10x_man.indd 16-17 12/11/04 11:33:56 am