Belkin OmniView F1DK102P User manual

B
P74242-D
Belkin Tech Support
US: 310-898-1100, ext. 2263
800-223-5546, ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 800 616 1790
Europe: www.belkin.com/support
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
[phone]
[phone] fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk,
The Netherlands
[phone]
[phone] fax
Belkin Ltd.
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
[phone]
[phone] fax
© 2007 Belkin International, Inc. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed. Windows, Windows
Vista, and Microsoft are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
KVM Switch

User Guide
F1DK102P
KVM Switch

1
Package Contents
• 2-Port KVM Switch with Cabling (PS/2)
• User Guide
Introduction
Congratulations and thank you for purchasing the Belkin 2-Port KVM
Switch with Cabling. The Switch is easy to set up and use, and comes
with everything you need to share one monitor, keyboard, and mouse
between your two computers. No additional cables or software
are required.
The diagram below shows a typical KVM Switch setup. Your monitor,
keyboard, and mouse connect to the Switch. The Switch is connected
to your two computers using the included cables.
Package Contents/Introduction

2
System Requirements
Monitor
The Switch supports LCD and CRT monitors with VGA connections.
You can also use your DVI-I monitor with the Switch by connecting a
VGA adapter to the DVI cable. The Switch does not support direct DVI
connections from monitors.
Keyboard/Mouse
The Switch supports PS/2-based keyboards and mice.
Computers
The Switch can be used with desktop or notebook computers that
support PS/2 keyboard and mouse connections, and that run on one of
these operating systems:
• Windows® 2000, XP, 2003, or Vista™
• Linux®
VGA connection
PS/2
connection
System Requirements

3
Installing your Switch
Be
fore you begin, make sure that both computers are powered off.
1.
Connect your monitor, keyboard, and mouse to the Switch.
Installing your Switch

4
2.
Connect the cables to the monitor, keyboard, and mouse ports on
your two computers.
3.
Power on your computers.
You are now ready to use your Switch.
Installing your Switch

5
Using your Switch
When you power up your computers, your first computer’s desktop will
appear on your monitor. You are now ready to use that computer as if
it were directly connected to your monitor, keyboard, and mouse.
To switch access to your other computer, press the “SCROLL LOCK”
key twice on your keyboard, followed by the up arrow key. Your other
computer’s desktop will appear on your monitor. You are now ready
to use your other computer as if it were directly connected to your
monitor, keyboard, and mouse. To switch back to your other computer,
press the “SCROLL LOCK” key twice, followed by the down arrow key.
Switch to Computer 1
Switch to Computer 2
Using your Switch

6
FAQs
What operating systems does the Switch support?
The Switch supports Windows 2000, XP, 2003, and Vista; and Linux.
What type of mice does the Switch support?
The Switch supports PS/2 mice from many manufacturers including
Belkin, Microsoft
®
, Logitech
®
, and Kensington
®
.
What is the maximum video resolution the Switch supports?
The advanced video circuit in the Switch supports a maximum
resolution of 2048x1536@65Hz.
Can I use my DVI-I monitor with the Switch?
Yes, you can use a DVI-I monitor with the Switch by attaching a VGA
adapter to the monitor’s DVI connector.
Do I have to install any software to use the Switch?
No, the Switch does not require any software to be installed in
your computers.
Do I have to connect one notebook and one desktop computer to
the Switch?
No, the Switch can also be used for two notebook computers or two
desktop computers.
FAQs

7
Does the Switch allow me to transfer files from one computer to
another computer?
No, the Switch allows you to share peripherals between computers
(monitor, keyboard, and mouse). To share or transfer files between
computers, you will need a networking switch.
Does the Switch require an AC adapter?
No, no additional power supply is required for the Switch to
function properly.
Can I use the Switch to switch video signals only?
No, the Switch requires power from the PS/2 ports in order to operate.
FAQs