Belkin OmniView F1DP101Mea User manual

User Manual
F1DP101Mea
OmniView® SMB
Remote IP Device

EN
FR
DE
NL
ES
IT

Table of Contents
1. Introduction ...................................................................................... 1
Package Contents ......................................................................... 1
2. Overview .......................................................................................... 2
Features ......................................................................................... 2
Equipment Requirements .............................................................. 4
System Requirements ................................................................... 5
Unit Display Diagrams ................................................................... 7
Specifications ................................................................................ 8
3. Hardware Installation ...................................................................... 9
Pre-Configuration .......................................................................... 9
Mounting the IP Device (optional) .................................................10
Connecting the Console to the IP Device ....................................11
Connecting the KVM Switch or Server to the IP Device ......................... 12
Powering Up the Systems ............................................................14
4. Remote Installation .........................................................................15
Identifying the IP Address ............................................................15
Logging into the Web Interface ....................................................16
Network Configuration ..................................................................18
User Settings ............................................................................... 20
Switch Configuration ................................................................... 23
Serial Settings ............................................................................. 25
Security Settings ......................................................................... 26
Maintenance ................................................................................ 28

Table of Contents
5. Using the Remote IP Device ........................................................... 30
Starting a Remote Session .................................................................... 30
Using the Quick-Access Toolbar .......................................................... 32
Mouse Configuration and Settings ...................................................... 33
Keyboard Configuration and Settings ................................................. 37
Video Configuration and Settings ........................................................ 39
Performance Settings (Bandwidth) ..................................................... 41
Selecting a Server ................................................................................... 42
Additional Features .................................................................................. 43
Restoring Factory Defaults .................................................................... 44
6. Frequently Asked Questions .......................................................... 45
7. Troubleshooting ..............................................................................47
8. Glossary ......................................................................................... 49
9. Information .....................................................................................51

UK-1
Introduction
Congratulations and thank you for purchasing the Belkin OmniView SMB
Remote IP Device (the IP Device). This IP Device provides a simple,
easy-to-use, remote server management solution for small- to medium-size
businesses. When connected to a KVM switch or server, the IP Device
allows you to access and control your servers over the Internet via a
standard web browser. This round-the-clock access enables you to
troubleshoot servers faster and more efficiently, reducing server downtime
and service costs.
This User Manual provides all the details you’ll need to install and operate
your new IP Device, in addition to expert troubleshooting advice—in the
unlikely event of a problem. For quick and easy installation, please refer to
the Quick Installation Guide included in your packaging.
We appreciate your business and are confident that you will soon see for
yourself why over 1 million Belkin OmniView products are in use worldwide.
Rack-Mount
Brackets
with Screws
OmniView SMB
Remote IP Device
User Manual Quick
Installation Guide
Package Contents
RS232
Cross Cable
One 5V DC, 2A
Power Supply PS/2
Cable Kit

UK-2
1
2
3
4
5
6
7
8
9
section
Overview
Features
• High-Performance Remote Access
The IP Device allows you to access and control a KVM switch configuration
and all connected servers from any remote console over a TCP/IP connection.
The IP Device can also be set up to provide remote access to an individual
computer or server. The IP Device provides superior video quality and mouse
control, giving you the same user experience as if you were accessing your
servers locally.
• Web-Browser Based
The IP Device allows you to access your KVM switch and all connected servers
from any computer connected to the LAN, WAN, or Internet using Microsoft
Internet Explorer version 6.0 or higher.
• Universal Compatibility
The IP Device seamlessly adds remote, out-of-band access to any KVM switch
or individual server with PS/2-console connections. When connected to a
daisy-chained KVM configuration, the IP Device provides remote access to all
connected servers.
• BIOS-Level Access
The IP Device allows you to remotely access the basic input/output system
(BIOS) of your servers to make changes and perform reboots, regardless of
network connectivity or server condition.
• User-Friendly Interface
The web-based interface allows you to set up and change the IP Device’s
functions quickly and easily through your web browser, without having to install
additional software onto your servers.
• Remote Serial Access
The IP Device provides support for one serial device, such as a managed
power distribution unit (PDU), so you can remotely perform hard reboots of
your servers.
• Enhanced Security
The IP Device provides 128-bit Secure Sockets Layer (SSL) encryption and
password protection to prevent unauthorized access to your servers and
protect data transferred over the Internet.

UK-3
Overview
• Digital Collaboration
The IP Device enables one user to access and control servers remotely
over the Internet. Up to eight users can also simultaneously view
remote sessions to share technical expertise and troubleshoot servers
collaboratively.
• Video Resolution
The IP Device supports video resolutions of up to 1600x1200@75Hz for
both local and remote consoles.
• Firmware Updates
Flash upgrades allow you to obtain the latest firmware updates for your IP
Device. These firmware updates ensure that the IP Device is compatible
with the latest devices and hardware and are free for the life of the IP
Device. Visit www.belkin.com for upgrade information and support.

UK-4
1
2
3
4
5
6
7
8
9
section
Overview
Equipment Requirements
Cables
To connect the IP Device to your KVM switch or individual server, the included
PS/2 KVM Cable Kit is required.
To connect the IP Device to your local area network, you will need to locate a
network cable with an RJ45 connector.

UK-5
Overview
System Requirements
Host Computer Operating-System (OS) Platforms
The SMB Remote IP Device is compatible with CPUs running on, but not
limited to, the following OS platforms:
• Windows® NT®, 2000, XP, Server 2003, or VistaTM
• Microsoft® DOS 5.x and above
• Red Hat® Linux® 8.x and above
• SunTM*
• Novell® 5.x
• SolarisTM 8.x and above*
*Adapters may be required.
KVM Switches
The IP Device is compatible with the following Belkin KVM Switches:
• OmniView Quad-Bus Series
• OmniView SMB Series
• OmniView PRO2 Series
• OmniView SE Plus Series
The IP Device is also compatible with KVM switches with PS/2-console ports
from other manufacturers including, but not limited to, the following:
• Avocent® Corporation
• ATEN
• Raritan®
• Black Box®
• Compaq®
• HP®
• IBM®
• Minicom
• Cybex
• Rose
• Daxten
• Tripp Lite
• NTI
• Adder
• D-Link®
• CCC Networks
• Rextron
• Emine
• KVM Partnership

UK-6
1
2
3
4
5
6
7
8
9
section
Overview
System Requirements
Keyboards
• PS/2-compatible
Mice
• PS/2-compatible with 2, 3, 4, or 5 buttons
• PS/2-compatible wireless and optical mice
Monitors
• CRT and LCD (with VGA support)
Remote-Console Software
The SMB Remote IP Device may be accessed remotely over a TCP/IP
connection from computers using the following web browsers and OS platforms:
• Microsoft Internet Explorer 6.0 and above with ActiveX® support
• Windows 2000, XP, or Server 2003
• Windows Vista**
**Internet Explorer® must be run under administrator mode due to extra security
for ActiveX plug-ins under Windows Vista.

UK-7
Ethernet
Port
PS/2 Mouse
Console Port VGA Monitor
Console Port
KVM/Server
Port
Serial-Device Port
Power
Jack
Go Local/
Reset Button
Power
Status LED
PS/2 Keyboard
Console Port
Overview
Back View
Unit Display Diagrams
Front View

UK-8
1
2
3
4
5
6
7
8
9
section
Overview
Specifications
Part No.: F1DP101Mea
No. of Users Supported: 1 digital or 1 local
Enclosure: Aluminum
Power Requirements: 3.3V DC, 1.3A power adapter
(center-pin negative)
Video-Resolution Support: Local analog port: Up to 1600x1200 @ 75Hz
Digital port: Up to 1600x1200 @ 75Hz
Console Keyboard Emulation: PS/2
Console Mouse Emulation: PS/2
Console Keyboard Input: MiniDIN6 (PS/2)
Console Mouse Input: MiniDIN6 (PS/2)
Console Monitor Port: HDDB15 female (VGA)
KVM/Server Port: HDDB15 female*
Ethernet Port: RJ45 (10/100Base-T connection)
Security: 128-bit SSL encryption
Typical Bandwidth: 0.31Mbps**
Serial-Device Port: RJ45
Power Connection: IEC
Port Selectors: 8 and 16 respectively for 8- and 16-port models
LED Indicators: 8 and 16 respectively for 8- and 16-port models
Dimensions: 1.1 x 4.1 x 3.1 in. (28 x 104 x 79mm)
Weight: 0.5 lbs. (0.2kg)
Operating Temp: 32° to 104° F (0° to 40° C)
Storage Temp: -40° to 158° F (-40° to 70° C)
Humidity: 0-80% RH, non-condensing
Warranty: 2 years
*The IP Device may be connected to any KVM switch or individual server with
PS/2 keyboard and mouse console ports.
**Typical bandwidth is defined as typical “non-intensive” administrative use at
16-bit color, 1024x768 resolution.
Note: Specifications are subject to change without notice.

UK-9
Hardware Installation
Pre-Configuration
(Typical configuration)
Where to place the IP Device:
The IP Device includes a mounting bracket and is designed for stand-alone or 0U
rack-mount installation.
Consider the following when deciding where to place the Switch:
• whether or not you intend to use the included bracket
• the lengths of the cables attached to your keyboard, monitor, and mouse
• the location of your KVM switch or server in relation to your console
• the lengths of the cables you use to connect your IP Device to the KVM switch or
server
Warning: Avoid placing cables near fluorescent lights, air-conditioning equipment, or
machines that create electrical noise (e.g., vacuum cleaners).
You are now ready to begin installation of your IP Device. The following
sections (pages 10–14) provide complete instructions for the hardware setup of
the IP Device to a KVM switch or individual server.










UK-10
1
2
3
4
5
6
7
8
9
section
Hardware Installation
Step 1 Mounting the IP Device (optional)
Note: Before you begin, locate the MAC address and device number on the
bottom of the IP Device. You will need these numbers later in the installation
process, so it is highly recommended that you record these numbers below
before mounting the IP Device to your rack.
MAC Address Device Number
1.1 Attach the included mounting bracket to either side of the IP Device.
(Refer to diagram below.)
1.2 Mount the IP Device to the rear post of your rack.
(Refer to diagram below.)
Note: Mounting screws for the rack are not included. Please use the specified
screws from your rack’s manufacturer.


UK-11
Hardware Installation
Step 2 Connecting the Console to the IP Device
2.1 Connect your monitor VGA cable to the monitor port on the front of the
IP Device labeled “ .” (Refer to diagram below.)
2.2 Connect your keyboard and mouse PS/2 cables to the keyboard
and mouse ports on the front of the IP Device. (Refer to diagram below.)



UK-12
1
2
3
4
5
6
7
8
9
section
Hardware Installation
2.3 Locate and connect a cable from your local area network to the
RJ45 Ethernet port on the back of the IP Device. (Refer to
diagram below.)
Step 3 Connecting the KVM Switch or Server
to the IP Device
3.1 Make sure your KVM switch and all connected servers are powered off.
3.2 Using the included KVM cable kit, connect the single DB15 connector
to the “KVM In” port on the back of the IP Device. (Refer to
diagram below.)

 





UK-13
Hardware Installation
3.3 Using the other end of the cable kit, connect the VGA and PS/2 cables
to the console monitor, keyboard, and mouse ports on your KVM switch
or server. (Refer to diagrams below.)
Connecting to a KVM Switch
Connecting to a Server
 








 



 








 




UK-14
1
2
3
4
5
6
7
8
9
section
Hardware Installation
Step 4 Powering Up the Systems
4.1 Attach the power adapter to the IP Device and connect it to a
power source to power up the IP Device. (Refer to diagram below.)
4.2 Power on the KVM switch or server connected to the IP Device. The IP
Device emulates both a mouse and a keyboard on each port, and allows
your KVM switch or server to boot normally.
4.3 Power on all servers connected to your KVM switch.
4.4 Check that the local keyboard, monitor, and mouse are
working normally.
 





UK-15
Remote Installation
Initial Settings
The following section provides instructions for setting the IP address for the
OmniView SMB Remote IP Device.
Step 1 Identifying the IP Address
Once your IP Device has been connected to your network and is powered
up, a Dynamic Host Configuration Protocol (DHCP) server on your network
will automatically assign the IP Device an IP address, gateway address, and
subnet mask.
To identify the IP address on your network, use the MAC address or unique
device number located on the back of the IP Device. If no DHCP server is found
on your network, the IP Device will boot with the following static IP address:
192.168.2.155.
If you want to connect more than one IP Device to the same network and there is
no DHCP server available, connect each IP Device to your network one at a time
and change the static IP address of each unit before connecting the next unit.
Note: If a DHCP server later becomes available on your network, the IP
Device will take a new IP address from the DHCP server. To keep the
original static IP address, you will need to disable DHCP (see page 19).

UK-16
1
2
3
4
5
6
7
8
9
section
Remote Installation
Step 2 Logging into the Web Interface
To log into the web interface:
1. Open your web browser (Internet Explorer version 6.0 or above is
required). If you are using Windows Vista, you must run Internet
Explorer in administrator mode. In order to run Internet Explorer in
administrator mode, right-click on Internet Explorer and select “Run
as Administrator”.
2. Type in the IP Device’s IP address in the address field, using this format:
https://192.168.2.155/config. The login page will appear (see Fig. 1).
Bookmark the page for easy reference.
Note: HTTPS is used for communication over an encrypted secure socket
layer (SSL) mechanism.
Fig. 1 Login Page
3. Type in the following default user name and password (case-sensitive):
User Password
admin SMBremote

UK-17
Remote Installation
4. Click . The web interface will open at the Network-Configuration
page (see Fig. 2).
Fig. 2 Network-Configuration Page