Belkin OmniView F1DH102U User manual

User Manual
SOHO Series
F1DH102U
F1DH104U
OmniView
Control multiple dual-head VGA/USB computers from
one keyboard, mouse, and two monitors
KVM Switch with Audio
™

TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Overview
Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Unit Display Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Step-by-Step Installation Guide
Installing the Switch Base . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Installing the HID USB Driver . . . . . . . . . . . . . . . . . . . . . . . . .10
Connecting the Video, Keyboard, and Mouse to the Console Ports,
and the Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Powering Up the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connecting the Computers . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Connecting Audio and Microphone–Optional . . . . . . . . . . . . . . . .14
Using Your Switch
Selecting a Computer Using Direct-Access Port Selectors . . . . . . . .15
Selecting a Computer Using Keyboard Hot Key Commands . . . . . . .15
AutoScan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Connecting USB Devices to the Built-In 2-Port Hub . . . . . . . . . . .16
Belkin KVM Switches and Accessories
OmniView KVM Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
OmniView KVM Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
OmniView KVM Accessories and Adapters . . . . . . . . . . . . . . . . . .22
FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

INTRODUCTION
1
Congratulations on your purchase of the Belkin OmniView SOHO Series KVM
Switch with Audio (the Switch). Our diverse line of quality KVM solutions
exemplifies the Belkin commitment to delivering high-quality, durable
products at a competitive price. Engineered to give you control over
multiple computers/servers from one console, Belkin KVM Switches come in
a variety of capacities suitable for all configurations, large or small. This
compact, affordable Belkin OmniView KVM Switch is backed by a Belkin
Five-Year Warranty and free technical support.
This manual will provide details about your new Switch, from installation
and operation, to troubleshooting—in the unlikely event of a problem.
For easy installation, please refer to the Quick Installation Guide included
with your Switch.
Thank you for purchasing the Belkin OmniView SOHO Series KVM Switch with
Audio. We appreciate your business and have confidence that you will soon
see for yourself why over 1 million Belkin OmniView KVM Switches are being
used worldwide.
Contents of Package:
•OmniView SOHO Series KVM Switch with Audio
•Attachable Base
•DB25 to RJ45 Flash Cable
•User Manual
•Quick Installation Guide
•Registration Card
•9V DC, 1A Power Supply

Feature Overview
The OmniView SOHO Series dual-head VGA/USB KVM Switch with Audio
allows you to control up to four computers, with one USB keyboard and
USB mouse and two VGA, SVGA, XGA, or XGA-2 video monitors.
USB Hot Keys
Hot keys allow you to select ports using designated key commands from
your USB keyboard. Control up to two (for the 2-port unit) or four
(for the 4-port unit) computers, using a simple hot key sequence on
your keyboard.
AutoScan
The AutoScan feature allows you to automatically scan and monitor
the activities of all operating computers connected to your Switch, one
by one.
Video Resolution
With a 400MHz bandwidth, the Switch supports video resolutions of up to
2048x1536@85Hz. To preserve signal integrity at high resolutions,
75-Ohm coaxial VGA cabling is required.
Flash Upgrade
Flash upgradeability allows you to obtain the latest firmware upgrades for
your Switch. These upgrades will let your Switch continue to be
compatible with the latest devices and computers. Firmware upgrades are
free for the lifetime of the product. Visit belkin.com for upgrade
information and support, or see the enclosed instruction document.
Microphone/Audio Support
The Switch supports USB-type speakers and microphones and has built-in
microphone and speaker jacks to support the growth of multimedia use in
small-office and home-office environments. This feature eliminates the
need to disconnect and reconnect these devices when switching between
computers, and reduces the clutter on your desktop with fewer speakers.
OVERVIEW
2

3
OVERVIEW
Direct-Access Port Selectors
Direct-access port selectors, conveniently located on the front face of the
Switch, allow for simple, manual port selection.
Cable Management
The designed enclosure offers built-in cable management to contain
connected cables. Once the cables have been connected and the shroud
slid into place, the cables are conveniently maintained through the
back opening.
LED Display
An LED display is added to the face of the Switch for easy status
monitoring. A lit LED indicates which computer the console has control
of. The corresponding direct-access port selector is located next to the
LED. When pushed, the LED should light next to the port selector.
USB Device Ports
Two USB device ports allow you to add shared peripherals. This reduces
cable clutter and eliminates the need to disconnect and reconnect
devices when switching between computers.

OVERVIEW
4
Equipment Requirements
Cables
For each dual-head VGA/USB computer to be connected to the Switch,
one dual-head VGA/USB cable is necessary.
To support resolutions of up to 2048x1536@85Hz, use of a 75-Ohm
coaxial cable is required to preserve signal integrity. Cables must have
HDDB15 female to HDDB15 male connectors.
Belkin OmniView KVM Cables for SOHO Series with Audio offer the highest
quality possible to ensure that your data is optimally transmitted and
include PC99 color-coded connectors for easier identification and
connection. Double-shielded, strain-relief constructed KVM Cables for
SOHO Series include an industry-standard, 14-pin, coaxial, VGA cable, and
nickel-plated connectors for high-resolution applications. The following
cables are recommended for your KVM Switch:
F1D9501-XX (Dual-Head VGA/USB Style)
-XX denotes the length in feet.
Available in 6-, 10-, and 15-foot lengths.

OVERVIEW
5
Operating Systems
Your KVM Switch is for use on CPUs using:
Platforms
•Windows®98/2000/Me/XP, Mac®OS*
*with USB support
Keyboards
•Supports 101-/102-/104-/107-key USB keyboards
Mice
•USB-compatible USB mice with 2, 3, 4, or 5 buttons
Monitors
•VGA
•SVGA
•MultiSync®
Microphone
•Multimedia microphone with 3.5mm connectors
Audio
•Multimedia speaker/stereo with 3.5mm connectors
Power Supply
•9V DC, 1A power supply required
Unit Display Diagrams
The Front of the KVM Switch
•Direct-access port selector
•LED for identification of selected port
•Removable shroud

OVERVIEW
6
The Back of the KVM Switch
Audio/microphone jacks
USB input ports—
devices 1 and 2
Flash-upgrade port
CONSOLE VGA port B
CONSOLE VGA port A
CPU 1 port B
CPU 1 port A
CPU 2 port B
CPU 2 port A
CPU 3 port B
CPU 3 port A
CPU 4 port B
CPU 4 port A
CONSOLE USB mouse port
CONSOLE USB keyboard port
DC power jack
Base

OVERVIEW
7
Where to Place the Switch
The compact size of the Switch makes it perfect for desktop placement.
Consider the following when deciding where to place the Switch: whether
or not you intend to use the direct-access port selectors; the length of
the cables attached to your keyboard, mouse, and monitor; the location
of your CPUs from your Console; and the length of the cables you will use
to connect your computers to the Switch.
Cable Distance Requirements
USB signals are the strongest when transmitted up to 15 feet between
the Switch and the CPU. Beyond 15 feet, probability of signal degradation
increases, which can cause the device to fail.
Cautions and Warnings
Avoid having cables near fluorescent lights, air conditioning equipment, or
machines that create electrical noise (e.g., vacuum cleaners).

OVERVIEW
8
Specifications
Part No.: F1DH102U, F1DH104U
Power: 9V DC, 1A adapter (required)
PCs Supported: 2 (F1DH102U), 4 (F1DH104U)
Monitors Supported: VGA and SVGA MultiSync, LCD
Max Resolution: 2048x1536@85Hz
Keyboard Input: USB
Mouse Input: USB
USB Device Ports: 2
Audio Output: 3.5mm jack (stereo)
Microphone Output: 3.5mm jack
CPU Ports: 15-pin HDDB type
LED Indicators: 2 (F1DH102U), 4 (F1DH104U)
Enclosure: high-impact plastic
Dimensions:
F1DH102U
6.75 (h) x 4.25 (w) x 7.75 (d) inches
F1DH104U
7.75 (h) x 4.75 (w) x 9.5 (d) inches
Weight:
F1DH102U 1.5 lbs.
F1DH104U 2.0 lbs.
Operating Temp: 32° to 104° F
Storage Temp: -4° to 140° F
Humidity: 0-80% RH, non-condensing
Warranty: 5 years
Note: Specifications are subject to change without notice.

STEP-BY-STEP INSTALLATION GUIDE
9
This section provides complete instructions for the hardware setup of a
single Switch. (F1DH102U, F1DH104U)
Installing the Switch Base
Hold the main housing with one hand and the base with the other.
With the narrow part of the base facing toward the rear of the housing,
align the hooks of the base to the base holes located underneath the
housing. Put the hooks through the holes and push the base toward the
front of the housing to lock the base into place. Please refer to diagram
for assistance.

10
STEP-BY-STEP INSTALLATION GUIDE
Connecting the Video, Keyboard, and Mouse to the CONSOLE Ports
and the Computers
1. Power down your computers.
2. Remove the rear panel of the Switch to expose the ports.
3. Connect your USB keyboard and USB mouse to the CONSOLE ports on
your Switch.
4. Take the video cables that are attached to your VGA monitors and
connect them to the CONSOLE video ports on your Switch.

STEP-BY-STEP INSTALLATION GUIDE
11
Powering Up the Switch
1. Connect the included 9V DC, 1A power supply adapter into an
available power outlet.
2. Attach the barrel into the power jack on the Switch to power
the unit. The LEDs should illuminate.

STEP-BY-STEP INSTALLATION GUIDE
12
Connecting the Computers to the KVM Switch
1. Boot up the computer you wish to connect via USB as you would
normally with the USB keyboard, monitor, and USB mouse connected
directly to the computer. Once the operating system has loaded,
attach the male and female VGA KVM cable connectors to the Switch.
Then attach the USB KVM cable connector to the back of the
computer. The operating system will automatically install the Switch.
Do this for all USB connections.
2. Shut down your computer. Take the two male VGA cable ends and
connect them to the appropriate female VGA ports on the back of the
computer. Connect the speaker audio connector to the computer’s
audio-output port. Do the same for the microphone connection. Do this
for all computers.

CONNECTING MICROPHONE AND SPEAKERS–OPTIONAL
13
1. Connect the speakers and microphone to the CONSOLE section of your
KVM Switch.
2. Connect one audio cable from the computer’s audio-output port to the
audio port in the CONSOLE section of the Switch. Do the same for the
microphone connection.
3. Power on your connected computers.
You are now ready to use your Switch.

USING YOUR SWITCH
14
You can select which computer to operate by either the direct-access port
selector located on the front panel of the Switch or through keyboard hot
key commands. Note that it will take 1–2 seconds for the video to display
after switching. This is due to the refresh rate of the video signal. There
is also re-synchronization of the mouse and keyboard signal that takes
place. This is normal operation and ensures that proper synchronization is
established.
Selecting a Computer Using Direct-Access Port Selectors
You can directly select which computer you wish to control by pressing
the corresponding direct-access port selector next to the appropriate
port. The LED will be lit to indicate that the port is currently selected.
Selecting a Computer Using Keyboard Hot Key Commands
Note: You must connect the USB keyboard to the designated USB
connector to have keyboard hot key switching function on
the keyboard.
You can command the Switch to switch ports with a simple keyboard
command sequence by using the [SCROLL LOCK] key and [UP], [DOWN]
arrow keys. To send commands to the Switch, the [SCROLL LOCK] key must
be pressed twice within two seconds. You will hear a beep for
confirmation. Then you can press the [UP], [DOWN] arrow keys to switch
between ports.
You can switch directly to any port by entering the port number of the port
you wish to use. For example, if you press [SCROLL LOCK], [SCROLL LOCK],
[2], the computer on port 2 will be selected.
Switch to port 2—#2 key Switch to port 4—#4 key
Switch to next active port,
[UP] arrow
Switch to previous active port,
[DOWN] arrow

USING YOUR SWITCH
15
AutoScan Mode
In AutoScan mode the Switch remains on one port for 10 seconds before
switching to the next. This time interval cannot be changed.
To enable AutoScan mode press [SCROLL LOCK], [SCROLL LOCK],
[0], [0]
Note: There is no mouse or keyboard control in this mode. This is necessary
to prevent errors. Otherwise, if the user is moving the mouse or using the
keyboard when the KVM switches to the next port, communication between
the computer and Switch could be interrupted and cause erratic mouse
movement, or wrong characters to display when using the keyboard.
To disable AutoScan mode, press the space bar.
Connecting USB Devices to the Built-In 2-Port Hub
The Switch includes a built-in 2-port USB device hub that allows you to
connect two additional shared peripherals. When you connect any USB
device to the Switch, that device can be accessed through whichever
computer you are currently using.
Note: This is not suitable for storage devices such as LS-120 drives and Zip®
drives because you cannot dynamically switch ports and disconnect a
mounted storage device when it is in use by the operating system. For
example, you are working on computer 1 with a file open that is stored on a
Zip drive connected to the Switch. If you switch to computer 2 while the
file is still open, you will get a “file lost or corrupted” error message on
computer one. The same will occur when you are using a streaming device
such as the Belkin VideoBus USB video capture device. You can switch from
one computer safely to the next, only if the VideoBus is no longer in use by
the first computer. You will notice that after the KVM switches to another
computer, the mouse remains inoperative for one or two seconds. This is
normal, and ensures that proper USB synchronization is established.
Enable AutoScan mode—#0 key

BELKIN KVM SWITCHES AND ACCESSORIES
16
OmniView KVM Switches
OmniView E Series
These KVM devices allow you to control two or four computers from one
console and make switching between computers more convenient.
Designed for compatibility with your PS/2 platform, they reduce desktop
clutter and provide a simple, reliable solution at a lower price point.
High-quality resolution of up to 2048x1536@85Hz is supported through
the E Series KVM Switch when used with coaxial VGA cabling, offering the
highest resolution without compromising the quality of the display. Power
for the KVM Switch draws off of the keyboard, meaning no power supply
is necessary and less cables to hassle with. Other standard features found
on this unit include: hot key functionality; PS/2 keyboard and mouse
emulations for error-free boot up; and a Belkin Two-Year Warranty.
F1DB102P 2-Port KVM Switch, PS/2 & VGA
F1DB104P 4-Port KVM Switch, PS/2 & VGA
OmniView SOHO Series with Audio
This innovative design provides built-in cable management and uses little
space while adding a whole new sculpted look to your desktop. The PS/2
KVM switch allows you to control two or four PS/2 computers from one
PS/2 console. The greatest interface flexibility is yours with PS/2 and
USB switches. They offer you expanded compatibility with either
interface, or both, along with the additional convenience of direct-access
port selectors on the face of the switch. The USB KVM Switch offers
support for USB computers and consoles. It includes a built-in, 2-port
USB device hub that allows you to connect additional shared peripherals.
Switch between speakers and microphones without having to unplug and
re-plug them when switching computers. The flash feature allows users to
download firmware updates to ensure compatibility with the latest
computers and devices. High-quality resolution of up to
2048x1536@85Hz is supported by the SOHO Series KVM Switch when
used with coaxial VGA cabling, offering the highest resolution without
compromising the quality of the display. Other standard features found on
this unit include: hot key functionality; keyboard and mouse emulations
for error-free boot up; and a Belkin Five-Year Warranty.
F1DS102P 2-Port KVM Switch with Audio, PS/2 & VGA
F1DS104P 4-Port KVM Switch with Audio, PS/2 & VGA
F1DS102U 2-Port KVM Switch with Audio, USB & VGA
F1DS104U 4-Port KVM Switch with Audio, USB & VGA
F1DS102T 2-Port KVM Switch with Audio, PS/2, USB & VGA
F1DS104T 4-Port KVM Switch with Audio, PS/2, USB & VGA
F1DD102U 2-Port KVM Switch with Audio, USB & DVI
F1DD104U 4-Port KVM Switch with Audio, USB & DVI

BELKIN KVM SWITCHES AND ACCESSORIES
17
OmniView SE Plus Series
OmniView SE Plus Series KVM Switches from Belkin create a secure
configuration that delivers optimum performance. They offer the advanced
features and centralized control today’s IA (Information Assurance)
computer environments require. Designed for precise security, the Switches
prevent unintended information exchange between connected computers.
System administrators gain complete control over multiple-platform
computers from a single console. The flexible, SE Plus design supports both
PS/2 and USB servers. It offers system-control features such as hot keys and
easy manual switching through our direct-access port selectors. These and
our active-port LEDs make complex operations simple to monitor and
execute. A seven-segment display indicates the active computer’s BANK
address when units are daisy-chained together. Compatible with Windows
95, 98, Me, 2000, NT, XP, Novell NetWare 4.x/5.x, Turbolinux, all Linux
distributions, and USB-based Mac and Sun systems.
F1DZ102T 2-Port KVM Switch with Enhanced Security, PS/2, USB & VGA
F1DZ104T 4-Port KVM Switch with Enhanced Security, PS/2, USB & VGA
OmniView PRO2 Series with On-Screen Display
OmniView PRO2 Series KVM Switches deliver reliability, performance, and
centralized control necessary for today’s enterprise environment. This
series of KVM Switches enables you to control multiple platform servers
from a single console. Available in the desktop-style, 4-port, and the 19-
inch rack-mountable. 8- and 16-port models, the OmniView PRO2 Series
KVM Switch expands easily for full control of as many as 256 CPUs
through dedicated daisy-chain ports. Video resolutions of up to
2048x1536@85Hz are supported through a 400MHz bandwidth. On-
Screen Display allows you to name and select attached servers using an
on-screen interface. Switch between ports by using hot key commands or
direct-access port selectors. The PRO2 Series uses standard cables for
easy installation; includes a 12-volt DC, 1-Amp power supply; and is
backed by a Belkin Five-Year Warranty.
F1DA104T 4-Port KVM Switch with On-Screen Display, PS/2, USB & VGA
F1DA108T 8-Port KVM Switch with On-Screen Display, PS/2, USB & VGA
F1DA116T 16-Port KVM Switch with On-Screen Display, PS/2, USB & VGA

BELKIN KVM SWITCHES AND ACCESSORIES
18
OmniView MATRIX2 Series with Dual-Console Control
OmniView MATRIX2 Series 8- and 16-Port KVM Switches enable two
administrators to control up to eight or 16 PS/2 and USB platform servers,
separately or simultaneously. Each user operates a separate console
following a different bus path for complete independence from the other
console. The OmniView MATRIX2 Series KVM Switch expands easily for full
control of as many as 256 computers through dedicated daisy-chain ports
and is natively rack-mountable for server room environments. Video
resolutions of up to 2048x1536@85Hz are supported through a 400MHz
bandwidth. On-Screen Display allows you to name and select attached
servers using an on-screen interface. Switch between ports by using hot
key commands or direct-access port selectors. The MATRIX2 Series uses
standard cables for easy installation; includes a 12-volt DC, 1-Amp power
supply; and is backed by a Belkin Five-Year Warranty.
F1DM208T 8-Port KVM Switch with Dual-Console Control, PS/2, USB & VGA
F1DM216T 16-Port KVM Switch with Dual-Console Control, PS/2, USB & VGA
OmniView KVM Cables
OmniView KVM Cables provide you with the quality connections necessary
to set up your KVM solution. Each kit provides the proper cables and
connectors to complete the installation of a Belkin OmniView KVM Switch.
OmniView KVM Cables feature sturdy, strain-relief construction and PVC
overmolding to prevent data loss. Use of 20-gauge wire delivers the high-
performance cable that users have come to identify with the Belkin name.
A ferrite bead reduces electromagnetic and radio frequency interference
(EMI/RFI). PC99 color-coded connectors and modified thumbscrews have
been added for easier installation.
OmniView E Series KVM Cables
Belkin E Series Cables allow you to connect all your PS/2 computers to
your KVM switch while offering high performance.
• Industry-standard, 14-pin coaxial VGA cabling
• Nickel-plated connectors
• Gray PVC Flextec jacket
Work with OmniCube™, OmniView SE, PRO, MATRIX, E, SOHO, PRO2 Series,
and many other KVM switches.
F1D9000-XX, PS/2 Style