Belkin PureAV AP30800-10 User manual

Home Theater Battery Backup with AVR Technology
User Manual
Clear Picture
Clean Sound
AP30800-10

PureAV Battery Backup
1
Table of Contents
Page
Introduction ......................................................................................... 2
Package Contents ............................................................................... 2
PureAV Battery Backup Features and Functions ........................3
Alarms .................................................................................................. 4
Product Features .......................................................................... 5
Installation ................................................................................ 6-7
Troubleshooting ............................................................................. 8
Technical Specifications .............................................................. 9
Storage ........................................................................................... 9
Belkin Connected Equipment Warranty ................................ 10-12
Information ................................................................................... 13

Introduction
Congratulations and thank you for purchasing the PureAV Home Theater
Battery Backup with AVR Technology (the PureAV Battery Backup).
Frequent electrical disturbances, both natural and man-made, degrade
the quality of power supplied to your home theater system. Brownouts
or blackouts can cause you to lose your complex settings, and ultimately
damage your valuable equipment along with the overall quality of your
home theater experience. In addition to providing battery power in case
of a blackout, our PureAV Battery Backup provides outstanding surge
protection and power conditioning while ensuring that you experience the
clearest picture and cleanest sound directly from the source.
Please save this manual!
It contains important operating instructions and warranty information
pertaining to your PureAV Battery Backup.
Please save or recycle the packaging materials
The PureAV Battery Backup packaging was designed with great care to
provide protection during shipment and delivery. Please keep the packaging
materials in the unlikely event that you must return this product for service.
Damage sustained during transit is not covered under the warranty.
Package Contents
You should have received the following:
• 1 PureAV Battery Backup unit
• 2 rackmount Brackets
• 1 Network Line Cable
• 1 Phone Line Cable
• 1 Coaxial Cable
PureAV Battery Backup
2

PureAV Battery Backup
3
PureAV Battery Backup Features and Functions
Indicator Condition Meaning
BATTERY ON
(Green LED)
Solid
Green
The PureAV Battery Backup is on battery
back-up mode and an Intermittent audible
alarm is on. The Battery Backup will begin
shutdown procedure.
Flashing
Green
Battery is low. The PureAV Battery Backup
will start shutdown. The buzzer sounds an
audible alarm.
OVERLOAD
(Yellow LED)
Solid
Yellow
The PureAV Battery Backup shutdown due to an
overload or short-circuit condition.
Flashing
Yellow
Battery output is drawing more power than the
Battery Backup can provide.
REPLACE
BATTERY
(Red LED) Solid
Red
Battery is weak or bad; the battery needs
to be replaced.
SITE WIRING
FAULT
(Red LED) Solid
Red
There is either no ground circuit or a
reversed polarity in the building wiring.
LOAD
(Yellow LED) Solid
Yellow
This display shows the PureAV Battery Backup
output load percentage level of 17%, 33%,
50%, 67%, and 85%.
BATTERY
(Green LED) Solid
Green
This display shows the battery capacity
percentage level of 20%, 40%, 60%, 80%, and
100%.
On/Off/Test Switch
LEDs Indicator Site Wiring Fault
Battery On
Battery
Load
Replace Battery
Overload

Alarms
Battery Backup (Slow Alarm)
When the PureAV Battery Backup is in battery-backup mode, the “Battery
On” LED (green) illuminates and the PureAV Battery Backup sounds an
audible alarm. The alarm stops when the PureAV Battery Backup returns
to normal online operation.
Low Battery (Rapid Alarm)
When the PureAV Battery Backup is in battery-backup mode and the
battery’s energy begins to run low, the PureAV Battery Backup will beep
rapidly until it shuts down from a depleted battery or returns to online
normal operation.
Overload (Continuous alarm)
When the PureAV Battery Backup is overloaded (the connected loads
exceed the maximum rated capacity), the PureAV Battery Backup
emits a continuous alarm to warn of an overload condition. Disconnect
nonessential equipment from the PureAV Battery Backup to eliminate
the overload.
PureAV Battery Backup
4